Micro Motion Coriolis flowmeters achieve CSA dual seal certification
The CSA certification for the U.S. and Canadian markets is to the ANSI/ISA 12.27.01 standard which presents requirements for Process Sealing between Electrical Systems and Flammable or Combustible Process Fluids.
The certification shows that the entire range of Micro Motion ELITE meters are compliant and are eligible to be marked as "Dual Seal." The Dual Seal marking eliminates the need to install secondary seals to prevent the possibility of process fluids migrating under pressure through the electrical conduit, cable and wire systems in the event of a failure of the primary seal. Recent changes to the Canadian Electrical Code and National Electric Code make it mandatory for users to install secondary seals if the device does not include either a "Single Seal" or "Dual Seal" marking on the nameplate.
"This certification illustrates our commitment to ensuring Micro Motion products are of the highest quality and broadest certification to deliver compliance and flexibility to our customers," said Andy Kolbeck, Vice President of Quality at Emerson's Micro Motion division.
By having the "Dual Seal" certification, Micro Motion ELITE meters provide significant customer benefits due to the elimination of the need to install secondary seals, thereby saving installation time and cost.
Ideally suited for refineries, oil production and petrochemical operations, Micro Motion ELITE meters also deliver substantial inherent benefits as they have no moving parts resulting in no maintenance or repair, can be installed without flow conditions or straight pipe runs, are accurate over a wide flow range, and deliver direct mass and volume measurement.
Micro Motion is the Coriolis leader in quality, measurement performance, and reliability, and is part of Emerson's broad range of intelligent, digital field devices that power the PlantWeb digital plant architecture. Further cost savings, increased plant availability, and enhanced safety and environmental compliance are achieved when the flowmeters are integrated into the PlantWeb digital plant architecture.
About Emerson Process Management
Emerson Process Management, an Emerson business, is a leader in helping businesses automate their production, processing and distribution in the chemical, oil and gas, refining, pulp and paper, power, food and beverage, pharmaceutical and other industries. A division of Emerson, Micro Motion, (www. micromotion.com) is headquartered in Boulder, Colorado, USA. Since inventing the first practical Coriolis flowmeter in 1977, Micro Motion has been the world's leading Coriolis flowmeter supplier, ranking #1 in both technology and customer support. Micro Motion technology and expertise play a key role in Emerson's combining of superior products and technology with industry-specific engineering, consulting, project management and maintenance services. Emerson brands include: PlantWeb, Micro Motion, Fisher, Rosemount, Mobrey, Daniel, Bristol,DeltaV, Ovation, and AMS Suite.
Emerson (NYSE: EMR), based in St. Louis, is a global leader in bringing technology and engineering together to provide innovative solutions to customers through its network power, process management, industrial automation, climate technologies, and appliance and tools businesses. Sales in fiscal 2006 were $20.1 billion.
MORE INDUSTRY NEWS
Fluke products named finalists for Plant Engineering 2016 Product of the Year Awards
Fluke Condition Monitoring and the Fluke 279 FC Thermal Multimeter are finalists in the Maintenance Tools and Equipment category. The awards honor...
Fuji America chooses Saki's automated optical inspection system
Saki's inspection and measurement systems will be used to ensure that the printed circuit boards produced at Fuji adhere to the standards of...
SWEMCO chooses FactoryLogix MES for factory visibility
As a provider for Fortune 500 companies, government entities, and privately-held businesses throughout North America, SWEMCO has used Aegis...
Cognex announces acquisition of two 3D machine vision companies
On October 27, 2016, Cognex acquired EnShape GmbH, a maker of advanced 3D vision sensors and software based in Jena, Germany. On August 30, 2016,...
Abaco Systems announces Kevin Campbell as Vice President of Engineering
Campbell’s appointment is the latest addition to the company’s growing pool of talent, which has seen Abaco grow from ~600 employees in...
WSCAD releases expanded electrical CAD data library
Over 140,000 updated parts, data and new records were added in 2016, including several from manufacturers such as BALLUFF, DRAGO, Phoenix Contact,...
Rotork delivers flow control to Suncor oil sands project
Suncor is a Canadian integrated energy company. Rotork has been a supplier of flow control products and services to Suncor for over 30 years,...
Strict But Supple: Automation in Biopharmaceutical Manufacturing
By Robert Harrison, COPA-DATA
Biopharmaceuticals represent the fastest growing sector of the pharmaceutical industry, making up about 20 per cent...
OleumTech helps Synergy automate wellhead and storage tank monitoring
For the wellhead, eleven (11) IO MAX Transmitters were installed. For the tank battery, a combination of fourteen (14) Liquid Level Sensors and...
Siemens helps chewing gum factory integrate disparate automation systems
The confectioner needed to upgrade its chewing gum sheeter machines, with a retrofit of servomotor and drive technologies as well as implementation...