Moore Industries Enclosure Certified Explosion-Proof by cCSAus
The BH enclosures provide protection for field-mounted hockey-puck instruments. In fact, the housing meets standards for enclosing indoor and outdoor electronic instruments approved for use in explosion-proof, dust-ignition proof and intrinsically-safe locations.
With the certificate, the BH equipment rating is as follows:
Class I, Groups A, B, C and D; Class II, Groups E, F and G; Class III; Type 4X, IP66. Prior approvals include Factory Mutual (FM) Explosion-Proof, Dust-Ignition Proof and NEMA 4X; IP66, and ATEX Flame-Proof certifications.
Meeting NEMA 4X and IP66 ratings, the BH housing is resistant to ultraviolet rays and chemicals. Its high impact structure protects instruments even in harsh field conditions.
With the cCSAus Certificate of Conformity, the BH Model Field-Mount Enclosure has been Certified as Explosion-Proof, added as “Part B” to the existing Certificate issued for Moore Industries’ SB Stainless Steel, Explosion-Proof Enclosure for Hockey-Puck Instruments.
MORE INDUSTRY NEWS
Okuma announces Koma Precision as 2016 Partner of the Year
Koma Precision received the highest number of votes amongst all 50 members of Partners in THINC in the annual partner effectiveness survey to earn...
ASTM appoints Arman Shakkaliyev to International Board of Directors
Shakkaliyev holds a law degree from Gumilyov Eurasian National University; an economics degree from Karaganda State University; and a degree in...
Plex Systems announces Richard Murray as Vice President of Engineering
Murray was most recently senior vice president of engineering at Bromium, where he led development for the company’s global enterprise cyber...
ISA announces Call for Abstracts for 2017 Water/Wastewater and Automatic Controls Symposium
Abstracts should include a 250-word proposal outlining the topic to be presented. Prospective authors have the choice of presenting a 30-minute...
TT Electronics announces participation in NASA mission to Mars
The Mars 2020 Rover will carry an entirely new subsystem to collect and prepare Martian rocks and soil samples. This subsystem will include a...
Rotork provides automated shut-off for heating pipelines in Northern Sweden bridge
Opened in 2014, the 2.1 kilometre bridge also carries two 400 mm diameter district heating pipelines which are now protected by an emergency...
Lakeview Farms uses Leading2Lean's CloudDISPATCH system to cut downtime by 34 percent
Six months after implementing Leading2Lean’s CloudDISPATCH system, however, Lakeview Farms experienced a 34 percent decrease in line downtime, a...
The Safety of AC Power Supplies Fed with DC Voltage
By Dr. Qin Wang, PULS
This whitepaper is an assessment of the safety situation with AC and DC power supplies and what organizations can do to...
Meeting Emission Control Through Improved Actuation
Pressure is mounting on the global oil and gas industry to reduce its environmental footprint while, at the same time, the industry is...
Inside Turck’s Industrial Control Edge Devices - Embedded PLC & ARGEE Logic Engines
By Bill Lydon, Editor, Automation.com
Keeping consistent with Internet of Things and Industry 4.0 concepts and architectures, Turck has embedded...