Back to:

Automation Portals

Advanced Micro Controls Inc. News

Advanced Micro Controls Inc. News & Product Announcements

Read about the latest news, products, mergers, and acquisitions in the automation, process control, and instrumentation industries for Advanced Micro Controls Inc.

Get the latest Advanced Micro Controls Inc. news headlines sent to your desktop as soon as they are published on Automation.com. Simply drag the corresponding RSS icon to your news aggregator (RSS reader) or copy the link and paste it in your reader.

http://www.automation.com/rss/?amci

Choose and click on a headline below to read the entire article:

		AMCI releases ANG1(E) Stepper Indexer/Drive with EtherNet/IP Interface - 02/14/12 The drive/controller communicates with a host PLC over the EtherNet/IP or Modbus-TCP network.

		AMCI adds Modbus TCP to its stepper indexer/drives - 12/05/11 The Modbus protocol extends the potential of SD31045E & SD17060E drives in PLC-controlled applications.

		AMCI adds networking to Rotary Encoders - 07/31/11 Rotary sensors are available for EtherNet/IP, Modbus TCP/IP, Profibus, or DeviceNet communication.

		AMCI announces motion control modules for Allen-Bradley PLCs - 06/07/11 Solutions include a 2-axis plug-in module for 1769 CompactLogix I/O, and a 1-axis module for 1734 Point I/O.

		AMCI adds Modbus TCP/IP to NR25 Encoders - 05/24/11 NR25 Modbus-TCP encoders are compatible with Schneider Modicon PLCs that support Modbus-TCP.

		AMCI signs N.O. Holder as rep - 04/18/11 N.O. Holder & Associates is now representing Advanced Micro Controls (AMCI) in North Carolina, South Carolina, and Virginia.

		AMCI opens Web Store for Resolvers and Encoders - 01/11/11 Web store is a direct online source for purchasing size 11 resolvers and size 15 magnetic encoders.

		AMCI signs rep in Southeast U.S. - 11/17/10 Simpson & Associates Representatives is now representing Advanced Micro Controls Inc (AMCI) in the Southeast, including: Alabama, Florida, Georgia, Mississippi, and Tennessee.

		AMCI enhances Size 11 Resolvers - 09/30/10 Enhancements include radiation hardened, submersible, and gearhead units.

		AMCI signs Midwest Representatives as rep - 09/23/10 Midwest Representatives is now representing Advanced Micro Controls Inc (AMCI) in the Michigan area.

		Advanced Micro Controls signs Paul Davis Automation as rep - 09/22/10 Paul Davis Automation (PDA) represents Advanced Micro Controls in Ohio, Kentucky, and Western Pennsylvania areas.

		AMCI toughens DuraCoder Rotary Encoders - 07/31/10 DuraCoder encoders are now available with stainless steel housings and an IP69K rating for operation in the most extreme conditions.

		AMCI and Rockwell Automation publish brochure - 06/29/10 Brochure describes AMCI product lines that are referenced in the Rockwell Automation Encompass Partners Program.

		Advanced Micro Controls releases NR25 EtherNet/IP resolvers - 06/24/10 NR25 EtherNet/IP resolver comes standard with Power over Ethernet (PoE), making it possible to install this resolver using a single Ethernet cable that transmits data and power.

		Advanced Micro Controls releases NR25 EtherNet/IP encoders - 06/07/10 Networked rotary sensors provide an overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions), or 30 bits total.

		AMCI releases 7160 Series SSI module for MicroLogix I/O - 03/30/10 7160 Series adds the ability to monitor rotary and linear applications to Allen-Bradley 1762 MicroLogix I/O.

		AMCI stepper drives are UL listed - 02/24/10 The SD17040, SD31045, and SD17060 series stepper drives are now certified by Underwriters Laboratories (UL) as UL Listed products.

		AMCI releases 7272 I/O modules for for EnDat encoders - 12/10/09 The 7272 module connects EnDat encoders to the 1756 ControlLogix PLC.

		AMCI announces 3100 series motion control for MicroLogix - 10/26/09 3100 series controllers plug directly into a MicroLogix PLC to control servo and/or stepper drives.

		LDT Sensors Get Interface Module for ControlLogix PLC - 10/14/09 The 7252 LDT/MDT interface card can directly interface to two magnetostrictive sensors with PWM, control pulse, or start/stop signals.

		AMCI introduces SD17040C microstepping driver - 07/13/09 SD17040C has switch selectable microstep resolutions, automatic idle current reduction, anti-resonance, short circuit protection, and overtemperature circuitry.

		AMCI releases stainless steel resolver transducers - 07/02/09 IP67 rated resolvers are available with 5/8” shaft, and hi-temp rating of 302°F.

		AMCI introduces 2600 Series programmable limit switches - 06/14/09 2600 Series PLS (Programmable Limit Switch) Controller Modules work with Allen Bradley’s CompactLogix PAC and MicroLogix 1500 PLC.

		AMCI releases ME15 series size 15 magnetic encoder - 11/03/08 ME15 series encoder resists shock, vibration, and cold temperatures and is available in either SSI or analog output versions.

		AMCI releases SD17060E stepper motor indexer/driver - 10/15/08 SD17060E connects to Allen-Bradley PLCs via Ethernet IP, eliminating the need for a separate controller.

		AMCI releases HT/HTT-400 resolver transducers - 03/07/08 Packaged in 4-in. dia anodized aluminum housings, HT/HTT-400 series are a direct mechanical replacement for existing resolver transducers.

		AMCI announces 5274 inspection module For ControlLogix - 10/02/07 5274 takes analog samples at known points and compares these measured values to a profile to determine if a tested part passed or failed.

		AMCI introduces SD17060B stepper drive - 09/24/07 The SD17060B is rated at 6.3 Amps (120 Vac). It has onboard LED diagnostics to simplify set-up and built-in safeguards for trouble free operation.

		AMCI introduces SSI DuraCoder rotary encoder - 02/25/07 Absolute SSI DuraCoder is available in either single-turn or multi-turn configurations. An optional 5/8" diameter shaft has a 100 lb radial load and a 50 lb axial load rating.

		AMCI adds heavy duty shaft to encoders & resolvers - 12/01/06 The heavy-duty shaft option for DC25 DuraCoders and H25 resolver transducers carries a 100 lb radial load and a 50 lb axial load rating, delivering a 250% increase over the current radial load rating of 40lb. The 5/8” front shaft is made of stainless steel. The increased radial load ratings enable accurate position readings without slippage of either chains or belts.

		AMCI 3401 Stepper Module Expands Motion Control into Point I/O for Allen-Bradley PLCs - 12/23/05

		SSI Interface Specialist Releases 4 Channel PLC Module for Allen-Bradley ControlLogix - 12/13/05

		AMCI Releases SSI Interface Module for Rockwell Automation's CompactLogix and MicroLogix PLC - 03/22/05

Automation.com Real-time Information for the Automation Professional May. 16, 2012

Cart

Automation.com

NOTICE: Your use of Automation.com constitutes your agreement to the Legal Notices, Policies, Terms, and Conditions governing its use. You should review these terms before proceeding.Copyright © 2000-2010 Automation.com - automation.com, automationtechies.com, automationtechies, automationtechie, and Member-Match are all trade and service marks of Automation Resources, Inc. All Rights Reserved.