News By Company, H-K
Honeywell Sensing & Control
_reg.jpg)
Honeywell announces digital Zephyr Airflow Sensors
Potential industrial applications include air-to-fuel ratio, analytical instrumentation, fuel cells, fume hoods, gas leak detection, and gas meters.
_reg.jpg)
Honeywell promotes Remi Volpe to VP-GM for EMEA Region
Volpe has more than 20 years of Honeywell experience. He served as the EMEA Marketing Director-buildings and CentraLine business leader for Honeywell’s Environmental & Combustion Controls (ECC) business.
_reg.jpg)
Honeywell introduces Rotary Configuration SMART position sensor
The sensor is durable, accurate, and cost-effective, enabling design engineers to replace an optical encoder, or to use it instead of a resolver.
Honeywell releases SS39ET Linear Hall Effect Sensor IC
SS39ET Series are designed to monitor magnetic fields from a permanent magnet or an electromagnet.
_reg.jpg)
Honeywell introduces TruStability NCS pressure sensors
PCB-mounted sensor offers a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range.
Honeywell to control offshore gas production facility
Honeywell will supply an Experion Process Knowledge System (PKS) at Wintershall’s new offshore gas production facility in the North Sea.
_reg.jpg)
Honeywell introduces WLS heavy-duty wireless limit switch
WLS Wireless Switch uses a license-free RF wireless 802.15.4 WPAN protocol, and has up to a 305 m (1000 ft) line-of-sight communication range.
_reg.jpg)
Honeywell introduces 225mm SMART Position Sensor
The 225 mm SMART Position Sensor senses the position of a magnet relative to a sensor from 0 mm to 225 mm [0 in to 8.86 in].
_reg.jpg)
Honeywell releases Limitless WGLA wireless limit switches
Limitless wireless switches and monitors use 802.15.4 as it is license free, globally acceptable, and requires low power consumption.
_reg.jpg)
Honeywell announces MICRO SWITCH BX2 limit switch
BX2 has a stainless steel housing for enhanced corrosion resistance in applications exposed to aggressive, caustic agents.
_reg.jpg)
Honeywell introduces SS361CT/SS461C sensor ICs
SS361CT and SS461C Bipolar Latching Hall-Effect Digital Sensor ICs allow for the use of less expensive magnets.
_reg.jpg)
Honeywell introduces TruStability silicon pressure sensors
Sensors are temperature compensated and calibrated to provide an extremely tight accuracy specification.
Honeywell introduces SS30AT magnetic position sensor
SS30AT is a digital Hall-effect device operated by the magnetic field from a permanent magnet or an electromagnet designed to respond to alternating North and South poles.
Honeywell introduces FSS-SMT force sensor
FSS-SMT Series low profile surface mount device allows for automated assembly on a printed circuit board.
_reg.jpg)
Honeywell earns ATEX certification for MICRO SWITCH EX Series
EX Series switch products received the International Electrotechnical Commission's Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx).
Honeywell Sensing and Control signs Mouser to distribute in Europe
Mouser Electronics expanded its current franchise agreement with Honeywell Sensing and Control to distribute products in Europe.
Honeywell introduces SNDH Quadrature Sensors
Sensor detects speed and direction of small, rotating targets with large air gaps (up to 0.08 in).
Honeywell introduces Hall-effect position sensors
Miniature Hall-effect devices offer a built-in regulator to provide stable operation over a 4.5 Vdc to 24 Vdc supply voltage range.
Honeywell enhances FF-SG AM2-l safety light curtains
FF-SG AM2-L enhancements include a longer scanning range, greater cable length, more mounting possibilities and fewer issues related to power supply.
Honeywell introduces V-basic standard switch
Available with a variety of actuators, electrical loads and terminations, Standard series is for operations where the cost to replace a failed switch is minimal.
_reg.jpg)
Honeywell introduces HIH-4030/31 series humidity sensors
Surface-mount sensor is available in tape and reel packaging for use in high-volume, automated pick-and-place manufacturing.
_reg.jpg)
Honeywell introduces safety solutions packages
Safety Solutions Package provides five common safety switch/safety control module configurations in machine protective guard applications.
Honeywell Sensing and Control Introduces Limit Switches
The new GLL limit switch comes in a compact and lightweight RoHS compliant package at a price that is up to 40% lower than comparable products. Potential OEM applications include elevators, escalators, aerial platform lifts, packaging equipment and industrial doors.
Honeywell Sensotec Introduces New Brake Pedal Load Cell
COLUMBUS, OH., September 2, 2005 —Honeywell [NYSE: HON] Honeywell Sensotec features a brake pedal load cell that measures force where the direction of the load changes. This sensor is designed with a large, flat loading surface (3” diameter) that increases similarity with the original pedal surface. A set of [...]
_reg.jpg)
Honeywell Introduces New HFD3023 Fiber Optic Detector Series with 5Mb Operations, TTL Interface
FREEPORT, Ill., March 21, 2005 — Honeywell (NYSE:HON) today introduced the HFD3023 line of fiber optic detectors. Suited for many demanding, high-performance applications, the detectors are designed for use in short-distance 850 nm fiber optic systems. Principal applications for the HFD3023 are expected to include [...]
Honeywell Sensing and Control Announces Release of New Oilfield Brochure
COLUMBUS, OH. November 1st, 2004) — Honeywell [NYSE: HON] Sensing and Control announces a new "Oilfield Tough" brochure detailing a full line of rugged pressure and load sensors is now available from Honeywell Sensotec, an operating unit of Honeywell Sensing and Control. The "Oilfield Tough" line has been widely [...]
Honeywell Sensing and Control Announces the Model SC500 Transducer Indicator/Conditioner
(COLUMBUS, OH. September 16, 2004) — Honeywell [NYSE: HON] Sensing and Control announces one of the most versatile tools on the test and measurement market, the Model SC500 from Honeywell Sensotec, an operating unit of Honeywell Sensing and Control. The Model SC500 offers small size (1/8 DIN), three transducer input [...]
Honeywell Sensing and Control Announces The Model CK Digital Pressure Gauge
(COLUMBUS, OH. September 9, 2004) — Honeywell [NYSE: HON] Sensing and Control announces the newest member of the battery-operated digital pressure gauge family from Honeywell Sensotec, an operating unit of Honeywell Sensing and Control. The Model CK uses a high-impedance sealed pressure transducer compatible with [...]
Honeywell Introduces High-Performance, Liquid Nano-Flow Sensor
FREEPORT, Ill., July 30, 2004 —Honeywell [NYSE:HON] Sensing and Control has developed a new flow sensor for measuring nano liter and micro liter liquid flow rates for the medical, life science and diagnostic industries. Typical applications include drug delivery, liquid handling, analytical instrumentation, [...]
Honeywell Sensing and Control Announces The Model MPB Family of High-Capacity Compression Load Cells
Columbus, Ohio, July 29, 2004 -- Honeywell [NYSE: HON] Sensing and Control announces the Model MPB Family of high-capacity compression load cells from its Sensotec Test and Measurement business. With a small footprint (1 in. to 14 in. high, 1.25 to 10 in. dia.) and rugged, all-welded stainless steel construction, these [...]
Honeywell Sensotec Introduces The VM Vibration Meter
COLUMBUS, OH., June 28, 2004 Honeywell [NYSE: HON] Sensing and Control announces a convenient hand-held vibration meter from its Sensotec Test and Measurement business. The portable, battery-powered Model VM from Honeywell Sensotec, Columbus, Ohio, enables engineers to prevent damage to components or bearings by monitoring [...]
Honeywell Introduces MLH Series Pressure Transducer
High performance, stability, accuracy and easy customization for demanding applications FREEPORT, Ill., June 11, 2004 — Honeywell [NYSE:HON] Sensing and Control announces the introduction of the MLH Series of Pressure Transducers. With high performance stability and accuracy, package flexibility, a wide range of [...]
Honeywell Introduces The FS300-100 Combi-Sensor for Boiler Systems
Offers Cost Savings with Liquid Temperature and Pressure Sensing in a Single Device FREEPORT, Ill., June 11, 2004 — Honeywell [NYSE:HON] Sensing and Control introduces the FS300-100 Combi-sensor that measures water pressure and inflow temperature in boiler systems. Honeywell has used extensive experience with [...]
Honeywell Introduces The ASDX DO Pressure Sensor
With Enhanced Digital Output, Application Specific Integrated Circuitry (ASIC) FREEPORT, Ill., June 7, 2004 — Honeywell [NYSE:HON] Sensing and Control announces the introduction of the ASDX DO Pressure Sensor. The ASDX DO features a digital output, which translates into higher clarity, better response times, and [...]
Honeywell Introduces New Universal Pressure Transducer/Transmitter
Ruggedness and accuracy combined for Industrial Sensing applications COLUMBUS, OH., May 26, 2004 - Honeywell [NYSE: HON] Sensing and Control announces a new universal pressure transducer/transmitter from its Sensotec Test and Measurement business. The Model BDR sensor delivers accuracies of +/-0.5% BFSL or +/-0.25% BFSL [...]
Honeywell Sensing and Control Announces It's Torque Watch Sensor is Now Available Through Sensotec Business
COLUMBUS, OH., May 21, 2004 - Honeywell [NYSE: HON] Sensing and Control announces that its leading range of Torque Watch sensors is now available through its Sensotec Test and Measurement business. The Honeywell Sensotec business adds a wider distribution network and increased support and service to the appeal of this [...]
Honeywell Introduces New Full Line Catalog Of Sensotec Sensors
COLUMBUS, OH, April 23, 2004 Now available in both print and online forms, the 25th edition of the Honeywell (NYSE: HON) Sensing and Control Sensotec products catalog contains specifications for nearly 200 specialist sensors that support applications ranging from deep-sea oilfield exploration to engine performance testing. [...]
Honeywell Wireless Telemetry System Helps Reproduce Wright Flyer
Measures how efficiently engine was able to turn propellers COLUMBUS, Ohio, February 17, 2004 - A century after Ohio brothers Orville and Wilbur Wright first flew their Wright Flyer at Kitty Hawk, North Carolina, Ohioans again played a major role in the history of flight. The Sensotec Test and Measurement business of [...]
Honeywell Sensotec Announces A New Pressure Sensor With Both Digital And Analog Outputs
The Model DS provides an RS485 or RS232 output and 0-5 Vdc analog output. The 1200 Hz frequency response of the analog output and 380 readings per second of the digital output is within the general requirements for the test & measurement market. The digital output eliminates the need for a computer interface A-D card with [...]
Honeywell Sensotec Announces IEEE 1451.4 Plug, Play, And Calibrate For Sensors And Signal Conditioning
Honeywell Sensotec has launched its plug, play and calibrate systems for its sensors and signal conditioning. The system is compliant to IEEE 1451.4 standard for connectivity of sensors and associated signal conditioning. The transducer electronic data sheet (T.E.D.S) containing sensor specifications, calibration data and [...]
Honeywell Sensotec Announces Accelerometers With Built-in Signal Conditioning
Analyzing the vibration signal from an accelerometer does not always require expensive or complicated analysis equipment. Built-in signal conditioning in the model MA15, MA321, MA322 and MAV52 accelerometers provides a 4-20mA output that is proportional to the RMS vibration value. This built-in signal conditioning means [...]
Honeywell Sensotec Announces Miniature Reaction Torque Transducers
Models QWFK-8M and QWLC-8M Miniature Reaction Torque Transducers are extremely compact. They have 4 bonded strain gauges positioned on a finely machined spindle to effectively measure torque ranges from 25 in.-oz. to 300 in.-lbs., and achieve 0.1% maximum non-linearity. These models operate and are calibrated in both [...]
Honeywell Sensotec Announces Model LK Digital Force Indicator
The Model LK Digital Force Indicator from DCT Instruments/Sensotec, Inc. provides a portable solution to calibration verification. Powered by a 9V battery, it can be deployed in virtually any remote location that requires force measurement calibrations in tension or compression of up to 10,000 lbs. It can be set to zero, [...]
Honeywell Sensotec Announces The Model SC2000 AM microprocessor-based Load Cell Calibration Conditioner
The Model SC2000 AM microprocessor-based Load Cell Calibration Conditioner provides 1 or 2 channels for load cell calibration. This high-accuracy instrument is calibrated against an 8.5 digit traceable digital voltmeter (DVM) and can present test and reference load cell measurements simultaneously on a split-screen [...]
Honeywell Sensotec Announces Model RTC Rotary Torque Sensor
Honeywell Sensotec offers the 0.96 inch wide RTC In-Line Rotary Torque Transducer for standard SAE or DIN driveline flanges. Torque ranges are from 1500 to 170,000 in.-lb. High torsional stiffness allows a high frequency response at rotational speeds up to 13,000 rpm. RF coupling of the sensor with a single-loop antenna [...]
Honeywell Sensotec Announces Model LL-V Vertical Entry Liquid Level Sensor
The rugged Model LL-V vertical entry submersible liquid level sensor from Honeywell Sensotec can be suspended in an open tank or attached to the crown of an enclosed tank and used to any depth. Welds in the stainless steel body of the sensor are helium leak tested. The atmospherically vented oceanographic cable assembly [...]
Honeywell Sensotec Has Launched Its Plug, Play and Calibrate Systems For Its Sensors and Signal Conditioning
COLUMBUS Ohio, 15 August, 2003 --- Honeywell Sensotec has launched its plug, play and calibrate systems for its sensors and signal conditioning. The system is compliant to IEEE 1451.4 standard for connectivity of sensors and associated signal conditioning. The transducer electronic data sheet (T.E.D.S) containing sensor [...]
Honeywell Sensotec Announces Model WTB, Wireless System
COLUMBUS Ohio, 8th August, 2003 ---The Model WTB battery-powered wireless transmitter option for standard Honeywell-Sensotec bridge based sensors simplifies testing, measurement, and automation by eliminating hookup of cables and sensing devices. Based on PWM technology, this system features up to 1000 Hz frequency [...]
Honeywell Sensotec Announces MA Series Accelerometer Line
1st August, 2003 --- Honeywell Sensotec offers the MA Series, a full line of test and measurement accelerometers built to survive harsh environments and accommodate a broad range of testing requirements. These robust, stainless steel instruments withstand up to temperatures between 100 and 500 degrees F depending on model [...]
Honeywell Acquires Sensotec Inc, Enhancing Its Product Offerings in Sensors
MINNEAPOLIS, February 12, 2003 – Honeywell (NYSE: HON) today announced that its Automation and Control Solutions (ACS) unit has signed an agreement to acquire the assets of privately held Sensotec Inc. The transaction is subject to government approval. Based in Columbus, Ohio, Sensotec is a supplier of sensors for [...]
Sensotec Introduces Complete Line of Din Rail Mounted Sensor Amplifiers
Complete Line of Din Rail Mounted Sensor Amplifiers Sensotec's Din Rail mounted amplifiers provide Hi-Level output signals, ready for long cable runs and/or direct interface to common PLC interface cards. These amplifiers provide controlled power to the associated sensor and condition the sensor's return signal before [...]
Sensotec's New Flush Diaphragm Pressure Transducer Provides High Level Output
Sensotec's new Flush Diaphragm Model 355 pressure transducer is a rugged, onepiece, stainless steel unit which features a flush diaphragm design, making it ideal for operations which involve the spraying or application of sealants, paints, coatings or other congealable media which can clog conventional pressure ports. The [...]
Sensotec Introduces Subminiature Flush Diaphragm Pressure Sensors
Sensotec's Subminiature Flush Diaphragm Pressure Sensors are used when cavities are to be avoided or space is at a premium. These Sensotec sensors with their welded construction have options which allow their use in severe environments. Small spaces, hot or cold temperatures, wet or dry conditions are addressed by Sensotec [...]
Sensotec--Miniature & Subminiature Load Cells
SENSOTEC's family of miniature and subminiature load cells deliver big performance in a small package. These miniature units are available in tension and compression models and cover a wide range of capacities from 50 grams to 10,000 pounds. With sizes as small as 0.13" high and =" in diameter, these units may be [...]
Sensotec--Calibration Class Ultra-Precision Load Cell
The Imperial Class Load Cells are an ultra-precision 'pancake' style load cell with a pull plate and calibration adaptor to ensure high repeatability when used in a test frame. These load cells are calibrated and traceable to NIST making them ideal for most high accuracy applications, including use in the metrology lab and [...]
Sensotec--Weld Force Gage is ISO 17025 Certified
Sensotecs unique hand-held Model WP9000 weld probe is ISO 17025 certified to satisfy the manufacturers needs to validate or re-validate resistance weld forces. This easy-to-use battery powered unit is immune to weld current and instantly captures peak weld-tip force achieved during the weld cycle. WP9000 meets all ISO/QS [...]
Sensotec--Calibration or Verification? DCT Gauges Deliver the Benefits of Both
Getting the best possible data about the operation of a pressure system would mean calibrating measurement instruments much more often than the typical once yearly. Calibration-class DCT pressure gauges offer an ideal solution: highly accurate periodic verification as an additional check on measurement systems without the [...]
