News By Company, H-K
JetWave 3220 series (Wireless AP) and the Korenix JetWave 3320 series (Wireless IP Gateway) facilitate the integration of wired and wireless networks.
JetBox 5300-w is equipped with 2 LAN ports and 4 serial ports (2 x RS232/422/485 and 2 x RS232) with “Serial to Ethernet (ser2net)” supported.
The outdoor access point provides WLAN client access in mesh and backhaul client connections.
JetNet 3906G-w provides embedded 48V DC boosting, making it suitable for noisy industrial automation applications.
Super Chain Ethernet technology is now available in JetNet 4508Gv2 Industrial 8-port Managed Fast Ethernet Switch and JetNet 5012G Industrial 8+4G Gigabit Managed Ethernet Switch.
JetNet 3906G industrial Gigabit Power-over-Ethernet (PoE) Switch conforms to IEEE standards 802.3af /802.3at and is suitable for IP surveillance applications.
JetWave 2800 Series supports up to 3 IEEE 802.11a/b/g/n RF modules for both the 2.4GHz and 5GHz RF bands.
Enhancements include miniPCIe and booster PoE for multiple connectivity and high-speed transfer ability for front-end control applications.
By installing wired and wireless Korenix industrial Ethernet switches in 22 of its trackside railway stations and 96 field level sites, the Qinghai-Tibet Railway eliminated the risk of broadcast storms on its monitoring and control system network.
JetPort 5804 and JetPort 5804i features a robust fiberglass antenna and redundant to the devices (RTTD Technology) for high speed serial to 802.11b/g wireless data transmission.
Advanced Modbus TCP has been added to the Ethernet Switch, with management items such as Port status, Ring Master, Ring port status, Ring Status and StatClear.
JetNet 5828G has complete Layer 3 IP Unicast routing for group management of large scale networks in power substations and electrical utilities.
Earlier this year, Beijer Electronics acquired a minority stake in Korenix. From the beginning the intention was to acquire Korenix and that is now accomplished.
Korenix entered into an alliance with Westermo. Beijer Electronics Group, of which Westermo is a part, acquired a minority share of Korenix.
Two models are available: JetNet 3006 with 6 fast Ethernet ports and JetNet 3006f model with 4+2 fiber ports.
JetWave 2450 IEEE 802.11b/g/n complaint outdoor wireless-N access point provides coverage up to 5Km.
JetBox 3300 has Ethernet, USB, isolated Serial and DIO ports for embedded front-end controller applications.
Software provides a platform for monitoring, configuring and maintaining IP-based communication networks, such used in surveillance and factory automation.
With 16 Fast Ethernet ports and 2 Gigabit SFP combo ports, the switch can aggregate up to 8 fast Ethernet and 1 Gigabit fiber/copper rings.
JetNet 5428G has dual gigabit rings for secure, high-bandwidth networking in complex industrial environments.
JetCard 2215 12-24V Booster PoE Switch Universal PCI card provides power through 4 PoE ports.
5628G is compliant with IEC61850-3 and IEEE1613 environmental certifications and specifically designed for deployment in power substations.
Field site devices such as PLCs, sensors, meters, RFID readers, etc. can be connected to the JetBox 8210 through serial ports, USB ports, and DI/DO.
JetNet 3008f provides packet forwarding, can handle 64~1552 packet sizes, and stores into 2 priority queues.
JetCon 3401G has a rugged aluminum alloy case with IP-31 grade ingress protection against damage by solid objects or dust.
JetNet 3006-RJ has a rugged weather tight aluminum case with six IP67 rated RJ45 Ethernet ports that have waterproof and dust-tight connections.
JetCon 6330 smart I/O to Ethernet converter has 16 channels of digital input.
JetNet 3706-RJ is equipped with six IP67 rated RJ45 Ethernet ports. Four of the six Ethernet ports are PoE capable.
JetNet 4506-M12 has a rugged weather tight aluminum case and six IP68 rated M12 Ethernet ports, providing a waterproof and dust-tight connection.
JetNet 5228G supports 4 gigabit ports, allowing users up to 8G uplink bandwidth, load balancing, path protection, network redundancy or apply MSTP to connect RSTP from different VLAN.
Catalogue contains industrial computing and networking equipment, including Ethernet switches, computers, I/O servers, and serial cards.
Encryption technology protects user software running in JetBox 9300/9310 industrial embedded computers from being copied illegally.
JetBox 9310 embedded computer for harsh industrial environments works in temperatures ranging from -40 to 80C.
Downloadable brochure illustrates complete industrial computing and networking applications.
This document briefs PoE technology and discusses the concerns for practical PoE deployment in industrial environments.
GSM Modem allows serial devices to send SMS and Data over a GSM wireless Network.
JetNet 4510 has 7 10/100TX ports and 3 10/100 RJ-45 / 100FX SFP combo ports.
I/O modules perform analog I/O, digital I/O, and temperature measurement in an Ethernet network with Modbus/TCP protocol.
JetPort 5801 one-port RS-232/422/485 Wireless Serial Device Server provides a 54Mbps connection to serial devices.
JetPort 5604i has dual Ethernet ports. When the primary path is down, the backup path will recover the Ethernet connection in less than 200ms.
Korenix JetNet 4706 Managed PoE Switch with WiMax network installed on a train in Europe provides train passengers with a reliable and seamless internet connection.
JetNet 5008G-P is equipped with six 10/100Base-TX ports, two Gigabit RJ-45/SFP Fiber combo ports, one internal Gigabit RJ-45 port for system connectivity and management.
Via a pair of JetCon 2401-s serial fiber converters, Korenix extends the range of Genius Serial Bus up to 40 km @ 153.6Kb baud rate.
When operating in the RSR redundant Ethernet protocol, the recovery time of a JetNet 5010G can be less than 5 msec.
JetNet 5008G-P 8-port embedded switch board provides managed switch functions.
Its SW package includes operating system, device drivers, server applications, utilities, libraries and application development tools on a CF card.
JetNet 4706 6-port Fast Ethernet Industrial Managed Switch has 4 10/1000TX PoE ports and 2 10/1000TX uplink ports.
Korenix JetNet 5010G/3010G/4508 industrial Ethernet switches and JetCon 1301 industrial media converters passed IEC 61000-2-6 life vibration tests.
The housing for JetNet industrial unmanaged power source PoE switch has a light weight aluminum case for operating in harsh environments.
Housing holds one JetNet 3705 4-port industrial unmanaged PoE switch, one extra uplink port, and one extra uplink Fiber port. The housing has an aluminum case.
JetNet 3010 provides 7-port 10/100 Fast Ethernet, and 3-port Gigabit RJ-45/SFP combo for file server sites with copper-wired Fast Ethernet networking. To analyze and forward packets with various priorities, the JetNet 3010G has implemented the Quality of Service for scheduling packet forwarding.
JetPort 5604 series 4-port Serial to Redundant Ethernet Device Server supports RS232/422/485 serial interfaces. JetPort 5604i provides 4 serial interfaces with 2KV optical isolation protection. One IP address provides dual redundant paths to control four serial devices over Ethernet.
JetNet 5010G industrial Gigabit Managed switch has three combo Gigabit ports and 7-port 10/100 Fast Ethernet, with a failover time of less than 30 milliseconds. Each Gigabit port accommodates 1000Base-SX, 1000Base-LX or 100Base-FX connectivity. The switch supports up to twenty units connected in a Gigabit Fiber Ring topology.
The JetWave 2410 2.4GHz IEEE 802.11g/b Wireless Outdoor Access Point complies with IEEE 802.11b/g standards. It links two or more separate networks (typically located in different buildings) to create a single expanded LAN quickly, simply, and economically.
JetNet 5010G and 3010G/3010GT Gigabit switches are suitable for a high bandwidth media networking environment, or a gradual migration to Gigabit speeds for industrial automation.
JetCon 1301 Industrial 10/100Base-TX to 100Base-FX Multi-Mode fiber converter has been passed the EtherCAT system test.
JetCon 2401 RS232/422/485 to fiber converter transmits serial protocol over fiber media up to 40km (JetCon 2401-s single-mode) or up to 5km (JetCon 2401-m multi-mode) and provides a higher level of signal quality and security than copper cabling. A fiber optic network link is immune to EMI, RFI, cross-talk, ground loops and other electrical problems, greatly enhancing the signal quality in severe environments.
The JetCon 1501 converts 10/100Base-TX signals to 100Base-FX signals. It supports link loss forwarding function and its UTP port supports auto MDI/MDIX function.T he fiber media provides high noise immunity against EMI interferences to greatly extend the network connection range and keep reliable transmission.
The JetCon 3301Gigabit Ethernet Media Converter converts 1000Base-T signals to 1000Base-SX/LX signals. It extends the connection range of Gigabit Ethernet device to transmit & receive data via Gigabit fiber cable without performance degradation.
JetPort 5601f RS232/422/485 3-in-one to Fiber Ethernet device server connects RS232, RS422 and 2/4 wire RS485 to one Multi-mode or Single-mode Fiber Port. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. The JetPort 5601f also supports HTTPS and SSH for secured communication management.
JetNet 4724G is a 24-Port 10/100Mbps with 802.3af PoE + 2-Gigabit-Port Web Smart Switch. The offers businesses a scalable solution to upgrade an existing network infrastructure with PoE connectivity. By utilizing the IEEE 802.3af PoE standard, it allows integrators to deliver power to remote devices in locations where a power outlet may not be available or to reduce cabling costs.
JetCon1301 Industrial Ethernet Fiber Media Converter can be operated in two different modes: switching converter mode and pure converter mode. Store-and-forward technology is implemented in switching converter mode to filter out abnormal packets. In the pure converter mode, it only converts the signal between copper and fiber port without any packet check.
JetPort 5601 RS232/422/485 Ethernet device server has built-in dual Ethernet ports. Both Ethernet ports are linked to upper communication ports and only one link can be activated at a time. When the master link breaks, the redundant back-up link will be activated in less than 200ms to guarantee non-stop data communications.
Korenix Technology JetCon 1302 industrial Ethernet converter connects 10/100BaseT(x) lines to 100BaseFX fiber, or vice versa. Providing two 10/100BaseTx ports and 100BaseFx uplink, JetCon 1302 can be best used as either a 3-port switch or RJ45 to fiber optic converter for two devices.
As a network expands to connect many devices together, Ethernet redundancy becomes more critical. Korenix Dual homing technology in JetNet 4508 and 4508f managed switches, provides the most flexible solution to let different brands of Ethernet devices connect together and keep a redundant Ethernet working in fast recovery.
Korenix JetCon 1302, a 2-port 10/100Base-TX to 100Base-FX Fast Ethernet media converter, provides extra flexibility for traditional Fiber media conversion. It adopts slim industrial design, small dimensions (HxWxD, 112mm x 30mm x 90mm) and little weight, to save rail space.
- Product Category:
- I/O Modules - Ethernet-based
Korenix JetNet 2005/2005f series is an Industrial 5-port 10/100 Base-TX Ethernet switch (JetNet 2005) or 4-port 10/100 Base-TX plus a single port 100Base-FX Fiber Ethernet switch(JetNet 2005f). It adopts slim industrial design, small dimension (112mm x 30mm x 90mm HWD) and little weight, to save rail space of compact system requirement.
JetNet 3705 supports 802.3af Power Over Ethernet technology that enables network devices to be powered over the network-cabling infrastructure. With 15.4W full power delivery for each of the 4 PoE ports, JetNet 3705 removes the need for separate power and data-cable infrastructure and costly AC outlets near cameras. Furthermore, it allows the removal of the electricians from the installation team.
The JetNet 3705 Industrial PoE Unmanaged Switches are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af PoE standard. The JetNet 3705 uses an external 48VDC power source, can deliver up to 15.4 watts power, and provides 10/100Mb data transmission over Ethernet cables. The PoE ports also have an auto-sensing algorithm so that they provide power only to attached 802.3af end devices.
JetNet 4500 Series Industrial Managed Ethernet Rail Switch supports RSTP over Super Ring technology, or also known as Dual Homing. In some industrial Ethernet applications, industrial Ethernet switches must co-exist with commercial switches. JetNet 4500 Dual Homing technology provides a solution for the compatibility issue.
JetPort 5201 single port RS232 serial device server provides serial to Ethernet performance of 460.8kbps in full duplex. It provides a transparent data gateway from serial to Ethernet and vice versa. Users can use TCP / UDP sockets or Windows COM / Linux tty driver to transmit data without modifying original controlling programs.
Jetnet3505/3508 Industrial Ethernet switches are designed for the applications that require network redundancy but easy maintenance.
JetCard 1204w/1208w 4- and 8-port RS-232 Universal PCI Wide Temperature serial communication cards support operation temperatures from -40°C to 85°C. The extreme harsh operation temperature design provides a solution for extreme outdoor applications, such as building automation, security, and billboard broadcasting.
Korenix Enables You to Plan your Network More Efficiently with JetNet 4000 VLAN and IGMP Snooping Features
As the industrial world is adapting more and more Ethernet solutions, and the Ethernet nodes are increasing each day, it becomes more difficult to maintain sufficient network bandwidth if not managed properly. The JetNet 4000 series support VLAN and IGMP snooping that can help you manage the bandwidth easily even though [...]
Korenix Technology, the professional supplier of industrial networking and communications products, opened its branch, Korenix Deutschland GmbH, in Stuttgart Germany, to better serve German-speaking customers and stand among industry giants, such as Hirschmann and Siemens. With the birth of Korenix Deutschland, several [...]
Korenixs RSTP Over Super Ring Technology Increases Compatibility Between Industrial and Commercial Ethernet Switches
Korenixs new JetNet 4500 Series Industrial Managed Ethernet Switch supports RSTP over Super Ring technology, or also known as Dual Homing. In some industrial Ethernet applications, industrial Ethernet switches must co-exist with commercial switches. The two different types of switches use different network redundant [...]
Korenixs JetNet Series Industrial Ethernet Switch now has a powerful new member, JetNet 4500, the flagship Ethernet Switch among managed series. Following the success of JetNet 4000 Industrial web-managed switch, Korenix develops JetNet 4500 Industrial managed switch with enhanced network management functions such as [...]
Korenix JetCard 1400 Series is 2-port and 4-port RS-422/485 Universal PCI Multiport Serial Card, specially designed for long distance industrial applications that require high speed RS-422/485 interfaces. What makes JetCard 1400 Series unique is its heart---Oxford OXmPCI954 chip---a 4-port UART, which is well-known for its [...]
On January 27th, 2003, The European Union established two new directives known as WEEE & RoHS. WEEE, Waste from Electrical & Electronic Equipment Directive, requires the collection and treatment of electronic & electrical equipment (EEE) at the end of the products life. WEEE is effective from August 13th, 2005. Every [...]
Replace Plastic Commercial Switch with Korenix Industrial IP30 Aluminum Ethernet Rail Switch According to the ARC Industrial Ethernet report, there will be over 14.2 billion devices controlled by the Internet by 2010. Considering the amount of devices and the different industrial environment for the network [...]
Korenix Technology recently released PSE48AF PoE Injector, and PD1205 PoE Splitter for Power over Ethernet applications in industrial fields. Power over Ethernet or PoE technology describes any system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. [...]
Korenix is presenting its new JetNet 3000w Series, an industrial 5-port entry-level wide temperature Ethernet rail switch. JetNet 3000w, as an extended series of JetNet 3000 Series Industrial Entry-Level Ethernet Rail Switch, provides you with 2 models: JetNet 3005w 5-port Entry-Level Wide Temperature Ethernet Rail Switch, [...]
Korenix is presenting its new JetNet3005f, an industrial 5-port entry-level Ethernet rail switch with one fiber port. JetNet 3005f, as an extended model of JetNet 3000 Series Industrial Entry-Level Ethernet Rail Switch, provides you with both JetNet 3005f-m 5-port Entry-Level Ethernet Rail Switch with one multi-mode fiber [...]
Korenix Technology recently released JetCard1204w / 1208w, which are 4- and 8-port RS-232 Universal PCI Wide Temperature Communication Card. The 2 cards are the worlds first serial communication cards that support operation temperature from -40°C to 85°C, providing perfect solution for extreme industrial [...]
Korenix Technology, the professional manufacturer of top-notch products for industrial automation, has announced to launch JetNet 3500 Series Industrial Unmanaged Redundant Ethernet Rail Switch. JetNet 3500 Series is 5-/8-port unmanaged Ethernet switch with plug-n-play Super Ring function and relay output alarm for port [...]
Korenix Introduces JetCard Series RS-232/422/485 Universal PCI Multiport Serial Cards with High-Performance OXFORD OXmPCI954 Chip
Korenix has recently launched JetCard Series RS-232/422/485 Universal PCI Multiport Serial Cards, which adopt high-performance OXFORD OXmPCI954 chip. OXFORD OXmPCI954 chip is well-known for its high performance. Its secret weapon is a built-in 4-port UART and a PCI controller, which provide high-performance serial data [...]