 |
_thumb.jpg)
|
ICS Triplex to control Subsea Compression Pilot Project
- 11/19/08
The AADvance system will provide anti-surge and safety control for subsea compression units, which are located half a mile below sea level at the Ormen Lange gas field off the coast of Norway. |
| |
|
|
ICS Triplex installs AADvance at Bayer CropScience
- 11/06/08
The Process Safety Control System was installed at Bayer CropScience’s Norwich site in June 2008 and became fully operational in August 2008.
|
| |
|
|
ICS Triplex to install compressor control system on North Sea platform
- 05/09/08
The Trusted T6300 system will be installed onto CNRI’s Murchison platform in the North Sea in 2009 to monitor and control a gas-lift process. |
| |
|
|
ICS Triplex upgrades ISaGRAF 5 for INtime RTOS
- 03/13/08
INtime provides deterministic, hard real-time control for Intel processors. Using the ISaGRAF with INtime enables high volume equipment manufacturers to build robust embedded systems.
|
| |
|
|
Semaphore adds ISaGRAF 5 to Kingfisher G30 SCADA System
- 12/20/07
Kingfisher G30 embeds the ISaGRAF 5 control software environment to provide support both the IEC 61131-3 and IEC 61499 standards. |
| |
|
|
ICS Triplex launches AADvance SCCS
- 09/07/07
AADvance is a combined hardware and software Safety and Critical Control System (SCCS). |
| |
|
|
ICS Triplex achieves Achilles Level 1 Certification
- 06/29/07
The Trusted Safety Controller received Achilles Controller Level 1 Cyber Security Certification from Wurldtech Security Technologies. |
| |
|
|
ICS Triplex supplies ISaGRAF for CSE-Semaphore's RTUs
- 06/11/07
The Kingfisher PLUS+ Series RTU embeds the ISaGRAF 5 control software, so it support boths the IEC 61131-3 and IEC 61499 standards. |
| |
|
|
ISaGRAF 5.1 achieves IEC 61499 compliance
- 05/09/07
Version 5.1 of ISaGRAF has been confirmed by TÜV Rheinland to be compliant with the requirements detailed in the IEC 61499 standard. |
| |
|
|
ICS Triplex ISaGRAF works with Beck Embedded Web Controller
- 04/02/07
ISaGRAF is compatible with Beck's IPC@CHIPR SC123/SC143 series of embedded web controllers. By using ISaGRAF 5, IPC@CHIPR users have the option of using the IEC 61499 standard to easily create distributed control applications. |
| |
|
|
ICS Triplex ISaGRAF is compliant with IEC 61131-3
- 02/22/07
Version 5.0 of ISaGRAF has been confirmed by TÜV Rheinland to be compliant with the requirements detailed in the IEC 61131-3 standard. ISaGRAF 5 incorporates both the IEC 61131-3 and IEC 61499 standards. |
| |
|
|
ICS Triplex enhances ISaGraf software
- 12/01/06
ISaGRAF 5.3 provides a unified development environment for the ISaGRAF installed base. Users will now have the ability to program and support the entire range of ISaGRAF controllers using the same development environment. An ISaGRAF 3 application can be created, compiled, debugged, simulated, downloaded and monitored. No modification to the ISaGRAF 3.x controller is required. |
| |
|
|
ICS Triplex updates ISaGRAF automation software
- 11/16/06
ISaGRAF version 5.1 enhancements include composite functions blocks (embedded objects) that are designed graphically, and a product library that includes IEC 61499 Service Interfaces (SI) for IXL access and Holobloc. They can be used in an application to read or write variable values from any ISaGRAF controller or Holobloc system.
|
| |
|
|
ISaGRAF Software included Rabbit Semiconductor's PLC Application Kit
- 10/12/06
ISaGRAF is the software of choice for Rabbit Semiconductor's new Embedded PLC Application Kit. The Rabbit Embedded PLC Application kit includes all of the hardware and software required to develop this low-cost PLC replacement system: the ISaGRAF Application Workbench, ISaGRAF programming cable, and the Rabbit BL2500 single board computer with embedded micro PLC firmware kernel.
|
| |
|
|
ICS Triplex Releases White Paper on IEC 61499 distributed control software
- 10/04/06
“Software for Next Generation Automation and Control” paper touches on topics such as requirements for the next-generation of automation and control, the IEC 61499 standard itself, and the IEC 61499-compliant ISaGRAF 5.0 software development environment. The white paper can be downloaded.
|
| |
|
|
ICS Triplex announces winning Mesures Award for ISaGRAF 5.0
- 06/28/06
This latest accolade is one of three awards presented to ICS Triplex ISaGRAF for its IEC 61131 / IEC 61499 compliant software, ISaGRAF 5.0. Awards are presented annually by Mesures Magazine in a variety of categories for innovative products considered to have significant industry impact. A representative from ICS Triplex ISaGRAF accepted the award at a reception held in Paris last week. |
| |
|
|
ICS Triplex ISaGRAF Announces Success of Almega AX-V6 Welding Robot
- 05/17/06
Manufactured by OTC DAIHEN Corporation, an internationally recognized supplier of arc welding power supplies and industrial robots, the Almega robot is known for its high speeds and smooth movements which shorten production time. The robot incorporates version 4.20 of the powerful and easy-to-use ISaGRAF software and can be used in processes ranging from arc welding to plasma arc cutting. |
| |
|
|
ICS Triplex Celebrates 40 Years of Incorporation
- 02/27/06
From a small workshop in Maldon, UK, ICS Triplex has grown into a world-wide organisation and one of the few remaining independent manufacturing and engineering companies in the automation industry today. With its Headquarters still located in Maldon, UK, ICS Triplex maintains the technology driven, customer led ethos that has been the force behind 40 years of successfully protecting people, investments and the environment. |
| |
|
|
ICS Triplex ISaGRAF Receives the Prestigious Control Engineering Editors’ Choice Award for ISaGRAF 5.0
- 01/17/06
Version 5.0 is the first commercially available software product to offer an IEC 61499 and IEC 61131 compliant programming environment that allows users to rapidly prototype and create high quality control products. |
| |
|
|
ICS Triplex ISaGRAF Releases the Award-Winning ISaGRAF Version 5.0 Software Solution
- 12/16/05
|
| |
|
|
ICS Triplex ISaGRAF Wins Leonard Grand Prize in Innovation for Latest Version of Automation Software
- 10/03/05
|
| |
|
|
ICS Triplex Announces Agreement with Wood Group Turbine Control Services
- 07/18/05
|
| |
|
|
ICS Triplex Awarded Subsea Compressor Control Development Project from Hydro Oil and Energy
- 07/11/05
|
| |
|
|
ICS Triplex Wins Alyeska Pipeline HIPPS Project
- 07/11/05
|
| |
|
|
ICS Triplex to Provide Emergency Shut Down System at Major Western Canada Gas Facility
- 07/06/05
|
| |
|
|
ICS Triplex ISaGRAF Announces Automation Software with IEC 61499 Function Block Compliance for Distributed Measurement and Control Systems
- 04/13/05
|
| |
|
|
ISaGRAF Version 4.5 Offers Key Technology Enhancements
- 02/11/05
|
| |
|
|
ICS Triplex ISaGRAF Releases New Motion Control Solution
- 01/17/05
|
| |
|
|
ICS Triplex ISaGRAF Announces Significant Growth in 2004
- 12/14/04
|
| |
|
|
ICS Triplex ISaGRAF Releases ISaGRAF Beta Version 4.5 Control & Automation Software
- 11/17/04
|
| |
|
|
ICS Triplex Acquires New Technology
-
|
| |
|
|
ICS Triplex Acquires AlterSys and New Technology
-
|
| |
