 |
|
Back to: Home Page > Automation News
|
|
    |
| Zaber introduces T-LS Linear Stage |
| |
|
|
July 20, 2008 - Zaber Technologies presents its T-LS linear stage, a 0.1 um resolution motorized linear stage available in 13mm and 28mm travel versions, with either metric or imperial mounting holes. These linear stages can be controlled manually or through an RS232 or USB port. In addition, every linear stage can be used in x-y or x-y-z configuration with our AB90 angle brackets
An x-y configuration makes an excellent microscope stage, especially when combined with our T-JOY3 Joystick Controller allowing manual control of both x and y axes from a single interface as well as allowing microscope stage positions to be saved and recalled at the touch of a button. T-LS stages are also commonly used in micromanipulator applications.
Features:
0.1 um resolution
Built in controllers
Several units daisy-chain to a single serial port with a single power supply
Available in13mm and 28mm travel with metric or imperial mounting holes
Can be used in x-y or x-y-z configuration with our AB90 angle brackets
About Zaber:
Zaber Technologies Inc. was founded in 1997 when precision motion control was typically accomplished with DC motors and encoders, requiring complicated, cumbersome and expensive controllers, amplifiers and power supplies. In 2000 Zaber introduced the first daisy-chainable miniature linear actuator based on stepper motor technology with integrated RS232 communications and control electronics in one small package. Since then Zaber has added over 120 products to its family of precision motion control and laboratory automation devices including linear actuators, linear slides, motorized x-y-z stages, rotation stages, motorized mirror mounts, and micro-stepping motor controllers.
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
