Back to:

Automation Portals

Today's Automation News Headlines from Automation.com

ITT introduces CFast 24-way connectors and cover sets

Go to company's web site

ITT introduces CFast 24-way connectors and cover sets

May 12, 2010 – ITT Interconnect Solutions developed a line of two-piece ultrasonic welded cover sets and 24-way connectors. The rugged CFast cover sets are comprised of a plastic frame molded around the cover and oriented in position with guide-posts, simplifying assembly. Once assembled, the covers are ultrasonically welded together with a continuous weld joint around the perimeter of the card.

The compact flash connectors and cover sets were designed specifically to support CFast’s latest small form factor removable storage standard set forth by the Compact Flash Association (CFA).

CFast cover sets and 24-way connectors are available in either Type I or Type II packages. The surface mount connectors are rated at 1.5A per pin and designed to exhibit no discontinuity greater than 100ns. Total mating force is 28.8N maximum at 25mm/minute, and total unmating force is 3.7N minimum, 24.5N maximum at 25mm/minute. The connectors and cover sets are rated to 10,000 mating cycles. Operating temperature ranges from -55°C to +85°C.

Typical pricing for the CFast connectors and cover sets starts at $0.71 for the top and bottom covers and $1.37 for the connectors in quantities of 100K pieces. Lead time is from 4 to 6 weeks.

Go to company's web site

Automation.com Real-time Information for the Automation Professional May. 24, 2012

Cart

Automation.com

NOTICE: Your use of Automation.com constitutes your agreement to the Legal Notices, Policies, Terms, and Conditions governing its use. You should review these terms before proceeding.Copyright © 2000-2010 Automation.com - automation.com, automationtechies.com, automationtechies, automationtechie, and Member-Match are all trade and service marks of Automation Resources, Inc. All Rights Reserved.