Automation Portals
- Automatic Identification
- Design & Simulation
- Digital Factory
- Electrical & Control Panels
- Embedded Automation
- Factory Automation
- Fieldbus Networks
- Flow, Level & Process Inst.
- Fluid Power, Valves & Pumps
- HMI & Operator Interfaces
- Industrial Communications
- Industrial Computers
- Industrial I/O
- Machine Control
- Machine Safety
- Manufacturing Intelligence
- Motion Control
- OPC
- Plant Management & Maint.
- PLCopen
- Process Control
- Process Safety
- Programmable Controllers
- Robots & Robot Controllers
- SCADA & RTU
- Security
- Sensors
- Systems Integration
- Test, Measurement & LIMS
- Vision
- Wireless Connectivity
- Network Portals
- EtherCAT
- EtherNet/IP
- PROFINET
- Industry Portals
- Building Automation
- Chemical
- Food & Beverage
- Machine Tools, CNC & DNC
- Material Handling
- Oil & Gas
- Packaging
- Pharmaceutical
- Power & Energy
- Transportation (Microsite)
- Water & Wastewater
- Event Portals
- Hannover Messe
- ISA Automation Week
Today's Automation News Headlines from Automation.com
| Measurement Computing releases USB-2404 analog input module | ||
|
||
.jpg) April 20, 2009 - Measurement Computing released a universal analog input module to the USB-2404 series of simultaneous data acquisition devices. The new module provides four channels of 24-bit universal analog input with integrated signal conditioning. The USB-2404-UI can be used to measure a variety of signal types, from such sensors as RTDs, thermocouples, load cells, and other powered sensors. Each of the four channels has a detachable six-position spring terminal, which is individually configurable, so a different measurement type can be performed on each channel. All channels are measured simultaneously at up to 100 S/s per channel. The USB-2404-UI can perform the following measurements: Measurement ranges vary for each type of measurement. The device features built-in current and voltage excitation, which is protected from both overcurrent and overvoltage fault conditions. Each channel also has a built-in thermistor for cold-junction compensation (CJC) calculations when measuring thermocouples. An analog prefilter removes noise that may be present in the signals prior to conversion. With 250 VAC channel-to-channel and channel-to-ground isolation, the USB-2404-UI protects the individual channels and connected computer and ensures a reliable data stream. The status of the device is indicated by an on-board LED. Each channel has a detachable six-position spring terminal for field wiring connections. Additional connectors are available for purchase. A strain relief kit is also available to secure signal wires. The USB-2404-UI ships with a 2-meter USB cable and is powered by the +5 volt USB supply from your computer. No external power is required. The USB-2404-UI series modules ship with an impressive array of software, including the new TracerDAQ®, a full-featured, out-of-the-box data logging, viewing, and analysis application; Universal Library™; and InstaCal™ installation, calibration, and test utility—powerful software solutions for programmers and nonprogrammers alike. The USB-2404-UI operates under Microsoft Windows 2000/XP/Vista® (32-bit) operating systems. |
||
|
||
