Back to:

Industrial I/O e-Newsletter Archive

Automation Portals

Industrial I/O Portal

Product Announcements

		TURCK adds four ports to FAS8 Advanced I/O Module - 05/23/12 Previously only available in four-port configurations, the IP67-rated FAS8 for AS-interface (AS-i) networks now has eight ports

		CAS Dataloggers introduces Series 3 DT80s - 05/21/12 DT80 simplifies data management, storing up to 10 million data points in user-defined memory so that users can log as much or as little as needed.

		UEI speeds up UEILogger - 05/16/12 The logger now supports sample rates as high as 500 kilosamples per second for 16-bit samples and 250 kilosamples per second for 18 to 24 bit A/D samples.

		Dataforth introduces MAQ20 Industrial Data Acquisition System - 05/14/12 MAQ20 is a family of DIN rail mounted, programmable, multi-channel, industrially rugged signal conditioning input and output modules and communication modules.

		Global Monitoring releases Messenger GMU8120 Remote Monitoring Unit - 05/14/12 GMU8120 is for remote monitoring and control of groundwater remediation systems that are often unattended and function without operator assistance.


		Data Translation releases DT9838 data acquisition module - 05/01/12 DT9838 is suitable for strain, load, pressure, and other bridge-based measurements.

		R. STAHL introduces 9160 transmitter power supplies - 05/09/12 9160 transmitter power supplies are available with an intrinsically safe interface and a SIL 3 version for functional safety applications according to IEC EN 61508.

		OMEGA Introduces PSW14 Electronic Pressure Switch - 05/04/12 PSW14 pressure switches can feature either a single switch with adjustable hysteresis or a dual switch with fixed hysteresis.

		ADDI-DATA releases MSX-E3211 Ethernet I/O system - 05/04/12 The Ethernet system is equipped with an ARM9 processor and 64 MB SDRAM. This allows the measurement values to be acquired, processed and stored directly on the spot.

		Moxa releases ioPAC 8020-C programmable RTU controller - 05/03/12 ioPAC 8020-C C/C++ programmable RTU controller features a Linux/GNU platform adapted to data acquisition and condition monitoring.

		WinSystems announces signal conditioning boards - 05/02/12 ISM-TRM-ISO-IN provides 24 lines of optically isolated inputs while ISM-TRM-ISO-OUT provides 24 lines of optically isolated outputs.

		Moxa releases ioLogik W5348-HSDPA-C wireless controller - 04/30/12 ioLogik W5348-HSDPA-C is a programmable 3G RTU controller featuring a Linux/GNU platform adapted for data acquisition and condition monitoring.

		Ultra Electronics releases MX-Series Multiplexers - 04/24/12 MX-Series feature input/output module selections that include 4-20mA, 0-10Vdc, contact closure and RS-232/485.

		Microchip introduces MCP3911 energy-measurement analog front end - 04/24/12 MCP3911 has two 24-bit, delta-sigma ADCs that operate at 3V with accuracy of 94.5 dB SINAD and 106.5 dB THD for energy-meter and power monitoring.

		Beckhoff introduces KL85 manual operating modules - 04/19/12 KL85 digital and analog I/O modules mount on the outside of control cabinet doors for manual machine intervention and moniotoring, and xonnect via Ethernet, EtherCAT, DeviceNet or PROFIBUS.

		ICP DAS Introduces tM Modbus RTU DAQ Module - 04/19/12 The tM series tiny network data acquisition and control modules can be remotely controlled through an RS-485 serial bus with DCON and Modbus RTU protocols.

		Eaton announces Power Xpert Gateway power monitor - 04/18/12 Power Xpert Gateway (PXG) delivers real-time, web-enabled, secure monitoring of electrical distribution equipment.

		Highland Technologies announces V545 signal processor - 04/17/12 V545 is a DSP-based sinewave processor intended for both simulation and acquisition of LVDTs, RVDTs, synchros, and resolvers

		MESA introduces 7I71 remote isolated field output card - 04/09/12 The MESA 7I71 is a 48 point remote isolated field output card designed for fast real time PC based control systems. Price: $86.

		Siemens Introduces Simatic ET 200SP I/O - 04/04/12 ET 200SP distributed I/O supports the Profinet network, delivers fast cycle times, provides high system performance and easily integrates into an automation system.

		DATAPAQ introduces Q18 radio telemetry system - 04/04/12 Radio telemetry system provides live temperature data transmission from inside industrial heating or cooling processes.

		Data Translation Announces DT9862S USB Data Acquisition Module - 04/04/12 DT9862S offers two 16-bit simultaneous analog channels, two optional analog outputs, 32 DIO lines, two counter/timers, three quadrature decoders, and ±500V galvanic isolation.

		Data Translation announces DT98 USB data acquisition modules - 04/03/12 DT9836-S has six analog inputs and sampling rates of 800 kHz/channel. The DT9862 with two analog inputs samples at 10 MHz per channel.

		Intelligent-Appliance announces IA-3118-U2i Relay I/O Controller - 03/28/12 The IA-3118-U2i features a dual watchdog protection circuit, 24VDC or 12VDC power and a DIN-Rail mounting fixture.

		MESA introduces 7I70 remote isolated field input card - 03/19/12 The 7I70 is a 48 point remote isolated field input card designed for fast real time PC-based control systems. Price: $57 in 100s.

		WinSystems introduces PCM-SDIO PC/104 Module - 03/15/12 PCM-SDIO is a PC/104-compliant module with four asynchronous serial ports and forty-eight lines of digital I/O. Price: $249

		Vecow Announces VSM-200 Video/Audio Capture Card - 03/14/12 VSM-200 supports up to eight channels of digital video and audio from PCIe, and can output these streams over pins in BT.656 or I2S-style interfaces.

		WAGO announces 859-940 High-Speed Optocoupler - 03/08/12 The 6mm-wide Optocoupler serves high-speed machine vision applications and quality testing with voltage conversion and isolation.

		EMS announces Sentry Calibrator - 03/08/12 Sentry Calibrator takes a 2 or 3 wire 4-20mA sensor output and applies a two point correction factor to provide an isolated two wire 4-20mA output.

		Highland Technologies announces V230 VME analog input module - 02/23/12 The V230 provides 64 channels of data acquisition for dense monitoring applications.

		Banner Engineering releases DF-G1 Expert Fiber Amplifier - 02/22/12 DF-G1 Expert has two easy-to-read digital displays showing signal level and threshold simultaneously for simple operation and pinpoint accuracy.

		NK Technologies introduces CTC Signal Converters - 02/22/12 CTC series lets users use an existing current transformer to produce a standard 4-20mA two-wire, loop-powered signal.

		Dwyer announces Model DW-USB-1-HT Temperature Data Logger - 02/21/12 USB Data Logger allows users to monitor temperatures up to 257 °F (125 °C).

		Apprion announces IONizer Connect wireless data communications - 02/19/12 IONizer Connect provides real-time communication between data points in the network, and has functions for interfacing and backhauling data from legacy sensors.

		Opto 22 releases SNAP-AIRTD-1K RTD input module - 02/16/12 SNAP-AIRTD-1K is a two-channel, isolated analog input module for use with 1000 ohm platinum resistance temperature detectors (RTDs).

		Omega Introduces OM-CP-EVENT101A Event Data Logger - 02/14/12 The OM-CP-EVENT101A interfaces to tipping bucket rain gages and other devices with TTL pulse or contact closure output. Price starts at $99.

		Logic Beach releases IL-Mini IntelliLogger data logger - 02/09/12 Using HyperWare-II icon-based programming software, the IL-Mini is quickly configured for simple to complex data logging strategies.

		Dytran introduces model 4020 3-channel signal conditioner - 02/09/12 Model 4020 is a microprocessor controlled 3-channel signal conditioner for both charge mode and IEPE sensors.

		CONTA-CLIP introduces GSM-PRO I/O module that emails problems - 02/08/12 GSM-PRO I/O module provides a remote control and maintenance solution that can signal changes at the inputs and outputs through text messages and emails.

		OMEGA Introduces MWTC-D Wireless Temperature Data Logger - 01/24/12 MWTC-D records over 65,000 process temperature data points and is available in standard J, K, T, E, R, S, B, C, or N thermocouple calibration.

		Belden introduces ESL EtherNet/IP I/O modules - 01/19/12 EtherNet/IP modules are available with 16 universal user-selectable digital inputs/outputs or 16 dedicated inputs.

		Data Translation enhances LV-Link software drivers - 01/11/12 LV-Link 3.0 includes a comprehensive, updated Help and additional example programs to make application development easier.

		DataNab announces Modbus I/O modules - 01/09/12 Ui28_PC2 and Ui16_R5 feature up to 28 universal inputs, high-speed pulse counters, and relay outputs.

		TURCK announces 4AI4AO-VI analog I/O module - 01/03/12 Featuring four analog inputs for current or voltage and four analog outputs for voltage, the module provides both control and feedback in one package.

		Mesa releases 7I66 Field I/O card - 12/30/11 7I66 remote isolated field I/O card for PC-based control systems has up to 24 digital I/O. Price: From $57.

		Unitronics introduces V200-18-E46B Snap-In I/O - 12/21/11 V200-18-E46B Snap-in module supports a total combination of 46 analog and digital inputs and outputs.

		MYNAH Introduces FMC772 Ethernet Driver for Subsea Integration - 12/20/11 This product provides an interface between Emerson’s and FMC Technologies Subsea control systems used in Floating Production and Storage Operation (FPSO) Oil and Gas Production Facilities.

		AutomationDirect introduces Werma Modular Stack Lights - 12/19/11 Stack lights in 50mm and 70mm sizes are ideal for use in applications such as machine tools, packaging machines, conveyor systems, loading docks and more.

		WAGO adds six Signal Conditioners - 12/08/11 The JUMPFLEX 857 Dedicated Signal Conditioners (DSCs) support applications requiring conversion, isolation and/or amplification of just one signal type.

		Data Translation enhances LV-Link software for LabVIEW - 12/07/11 Enhancements in the free LV-Link 3.0 software include complete support for 32- and 64-bit LabVIEW, and updated example programs to aid application development.

		Weidmuller announces ACT20M Signal Isolators/Converters - 12/05/11 This series of eight single- and dual-channel models is suitable for industrial process measurement and control applications.

		Calex introduces AHW DC/DC converters - 11/30/11 Dual output AHW DC/DC converters have a continuous input range of 9VDC to 75VDC.

		Semiconductor Circuits introduces CPZ DC-DC converters - 11/28/11 These modules provide 40W of power @ 55C & 200lfm of airflow and are ideal for space constrained distributed power or bus converter applications.

		CONTEC introduces two analog I/O units - 11/28/11 AIO-121602LN-USB and AIO-120802LN-USB provide analog I/O, digital I/O and digital counting to computers via USB.

		Acromag announces AXM-A75 I/O extension module - 11/22/11 AXM-A75 I/O module plugs into PMC and XMC cards to provide front-end A/D conversion, D/A outputs, and discrete level monitoring/control functions.

		Mesa introduces 5I25 motion control I/O card - 11/17/11 5I25 low profile PCI card uses standard parallel port pinouts and connectors for compatibility with most parallel port motion control I/O.

		National Instruments Introduces PXI Express Expansion Modules - 11/16/11 NI PXIe-8364 and NI PXIe-8374 directly interface multiple PXI Express chassis to a single host computer.

		T&D introduces RTR-505V Wireless Logger. - 11/16/11 Logger can be used to measure voltage directly or from the output of a wide variety of sensors and instruments.

		Invensys updates Foxboro I/A Series System - 11/08/11 Enhancements include an Intelligent Marshalling solution, and updated Foxboro Control 3.0 and Simulation software.

		National Instruments Adds Options to RIO Platform - 11/07/11 Additions expand the options for adding specialized or custom I/O to packaged and board-level embedded control and monitoring systems.

		NI Introduces CAN and LIN Interfaces for CompactDAQ - 11/07/11 C Series 9861 CAN and 9866 LIN interface modules are low-speed modules that integrate with the entire NI CompactDAQ platform.

		MESA announces 7I69 Remote TTL I/O card - 11/06/11 The 7I69 communicates with the host via a RS-422 link up to 100 ft long. Price: from $50

		WAGO introduces 859 Series Voltage-to-Frequency Converters - 11/03/11 The DIN-rail mount Voltage-to-Frequency Converters (VFCs) simplify simulators by replacing standalone frequency generators, rotating equipment and associated cabling.

		Data Translation adds MEASURpoint Instruments - 11/01/11 Two unnamed ultra high-isolation Ethernet measurement instruments have been added to the MEASURpoint product line.

		Emerson Process Management announces intrinsically safe CHARMs - 10/26/11 The DeltaV CHARM I/O Card (CIOC) supports both conventional and IS CHARMs, providing flexibility in control system I/O topology.

		Wago releases two Digital Input/Output (DIO) Modules - 10/18/11 Configurable channel-by-channel, the 767-5801 & 767-5802 modules (24V DC, 0.5A) run in direct input (DI), direct output (DO) or mixed DIO modes.

		T&D introduces RTR-505Pt Wireless Temperature Logger - 09/26/11 The logger is compatible with 3-Wire Pt-100 Sensors and accepts 3-Wire screw terminal attachments.

		WAGO announces 750-606 24VDC Power Supply - 09/22/11 Carrying IECEx-i certifications, the 750-606 permits one WAGO-I/O-SYSTEM node to serve hazardous and non-hazardous environments by separating intrinsically and non-intrinsically safe sections.

		Moore Industries adds Ethernet and Modbus to NCS RTU - 09/21/11 The update allows the NCS to be used as either a single or dual MODBUS master, providing Ethernet and dual MODBUS RTU master/slave communications.

		Data Translation announces three 12-bit USB DAQ modules - 09/19/11 DT 9812A, DT 9813A and DT 9814A instruments are twice as fast as existing models with a sampling rate increase from 50 kHz to 100 kHz.

		CAS DataLoggers announces HSM-24V External Module - 09/19/11 HSM-24V provides 32 digital I/O channels for ADwin real-time data acquisition and control systems.

		Opto 22 announces SNAP-OMR6 mechanical relay modules - 09/14/11 SNAP-OMR6-A and SNAP-OMR6-C power relay output modules offer four separate channels of switching for up to 250 VAC or 30 VDC, 6 amp loads.

		ADLINK releases multi-function USB DAQ modules - 09/14/11 USB-1900 and USB-2401 DAQ modules are eEquipped with built-in signal conditioning for both portable measurement and machine automation applications.

		Saelig upgrades MSR145 miniature datalogger - 09/13/11 MSR145 now has storage capability for over one billion readings from a number of parameters simultaneously with 12-bit resolution.

		Power Sources Unlimited. announces Cincon CHB200W DC-DC converter - 09/13/11 CHB200W series DC-DC Converters are capable of delivering up to 200 watts in the industry standard half brick package.

		Balluff introduces modular I/O for industrial ethernet - 09/08/11 Distributed modular I/O can be used to replace standard slice I/O and distributed I/O solutions.

		Pepperl+Fuchs introduces Switch Amplifiers for hazardous areas - 08/30/11 Switch amplifiers with line fault detection enable users to simultaneously transfer switch and fault signals via a single output.

		Delphin releases ProfiMessage data acquisition system - 08/17/11 Areas of application range from the monitoring of industrial processes to laboratory data acquisition and test stand automation.

		austriamicrosystems announces AS1328 step-down converter - 08/16/11 The AS1328 DC-DC can deliver up to 3A of output current at output voltages as low as 0.6 V while operating from an input voltage of 2.7 to 5.5 V over a -40°C to 85°C temperature range.

		Saelig Introduces Signal Wizard 3.0 Audio Signal Processor - 08/16/11 It can mix, amplify, filter, delay and adjust the phase of individual input signals, selected by using the included intuitive PC software.

		Pico Technology releases PicoLog CM3 Current Data Logger - 08/15/11 Applications include monitoring three-phase motors and generators, measuring the consumption of HVAC systems, and balancing phases in multiphase supplies.

		OMEGA Introduces PCM5 Pulse Control Module - 08/10/11 PCM5 series module converts a 4 to 20 mA signal from a process/temperature controller or computer to a time proportional output.

		Saelig Introduces USB-powered 5GSa/s Digitizer - 08/09/11 PS6407 can handle a wide variety of signals such as high-speed serial data, automated test rig waveforms, and high-frequency circuit designs.

		UEI Announces DNA/DNR-AI-224 Strain Gage Input Boards - 08/09/11 DNA/DNR-AI-224 high speed, four channel strain gage input boards are for UEI’s data acquisition and control Cubes and RACKtangle I/O racks respectively.

		Cooper Bussmann Introduces ESD Suppressor Array - 08/07/11 ESD overvoltage suppressor provides fast response and reliable ESD protection for data signals in any application requiring input/output, antenna, audio/video ports or data lines.

		SoftPLC adds Interface to Allen-Bradley Remote I/O - 08/04/11 This interface provides connectivity to Allen-Bradley Remote I/O, such as 1771, 1747, SLC-500, Flex, and other compatible networks.

		WAGO releases 857-402 JUMPFLEX Signal Conditioner - 08/03/11 857-402 JUMPFLEX offers signal clipping and freely scalable voltage input range of ±60mV to ±200V. Current input range is ±0.3 mA to ±100mA.

		National Instruments Announces Multicore CompactRIO - 08/02/11 cRIO-908x systems feature an Intel Core i7 dual-core processor for increased processing power, Xilinx Spartan-6 field-programmable gate arrays (FPGAs) and Windows Embedded Standard 7.

		Calex announces Model 4720 strain gage amp - 07/31/11 Model 4720 provides amplification and filtering for load cell, strain gage, or single ended analog inputs.

		Advantech introduces ADAM-6100 Ethernet/IP-based I/O Modules - 07/27/11 ADAM-6100 modules use the EtherNet/IP protocol and allow daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications.

		UEI releases DNA/DNR-DIO-470 10-channel relay boards - 07/26/11 The 10-channel, high-current, electromechanical relay boards are for use with UEI’s Cube and RACKtangle I/O

		Pico Technology releases PicoScope 6407 Digitizer - 07/25/11 Digitizer has four 1 GHz 50-ohm analog inputs and a 5 GS/s sampling rate, to handle a wide variety of signals such as high-speed serial data and waveforms from automated test rigs.

		Pickering releases 117 Series SIL Reed Relays - 07/24/11 The 117 series occupies a small board area--just 0.15 inches x 0.4 inches for the two pole version.

		Highland Technology releases model V210 relay board - 07/21/11 The V210 has 64 SPDT electromechanical power relays under VME register control.

		Unitronics introduces V200-18-E62B Snap-in I/O Module - 07/11/11 V200-18-E62B Snap-in module supports a total combination of 62 analog and digital inputs and outputs.

		Data Translation releases DT9862 data acquisition module - 07/10/11 DT9862 data acquisition module features 32 digital I/O channels, two counter/timers (32-bit), and three quadrature decoders.

		Advantech Introduces APAX-5080 Counter Module - 07/06/11 APAX-5080 can simultaneously take counts from multiple sources using any of its five operating modes (UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes).

		Calex announces Model 437 signal conditioner - 07/05/11 Model 437 is a self-contained, DC powered signal conditioner for load cells and transducers utilizing full bridge strain gages.

		Cyber Sciences enhances SER-3200 Event Recorders - 06/30/11 Version 1.10 update, available for free download by existing customers, adds automatic time sync with an NTP network time server.

		ELK Industries releases ADC24 A/D System IC - 06/30/11 ADC24 Analog to Digital system CMOS hybrid integrated circuit is a 24-pin DIP IC that requires only +5 volts.

		Opto22 introduces SNAP-AITM-4i TC and millivolt input module - 06/29/11 SNAP-AITM-4i accepts up to four inputs from a wide range of thermocouples commonly used in industrial, scientific, and medical research applications.

		Acromag announces APCe8650 PCI Express Carrier Card - 06/26/11 Carrier cards route power and interface bus signals to four plug-in IP modules through the PCIe card slot connector for rapid data throughput.

		Data Translation releases DT9837C Data Acquisition Module - 06/22/11 The DT9837C features 24-bit resolution for audio testing and acoustic measurement applications.

		GE announces ICS-1572A ADC/DAC - 06/21/11 The board features 16-bit data acquisition at up to 250MHz and the latest Xilinx Virtex-6 FPGA processor.

		Calex announces LP series 240 Watt DC/DC converters - 06/08/11 Its 9 to 36 Volt input range makes the LP ideal for mobile battery powered applications (12V) as well as industrial (24V) and military COTS (28V) requiring a wide input range.

		ConTech announces QMJ DC/DC converters - 06/05/11 QMJ Series has up to 20 Watts of fully regulated output power and a 4:1 input range with nominal input voltages of 24VDC and 48VDC.

		ACCES I/O introduces DAQ-PACK I/O - 06/05/11 DAQ-PACK provides high-speed analog and digital I/O capabilities for any PC or embedded system with a USB port.

		Mornsun announces AS-1WR & BLS-1WR DC/DC converters - 06/02/11 DC/DC converters feature continuous short circuit protection.

		Matrox Graphics introduces Avio Series KVM extenders - 05/26/11 The KVM extender enables users to secure a host computer in a climate-controlled room by capturing the system’s I/O up to 1000 meters away over a single fiber optic cable.

		Power Sources Unlimited announces TEN 40N DC-DC Converters - 05/25/11 The TEN 40N series high performance 40 Watt DC/DC converter modules feature 4:1 and 2:1 input voltage ranges in a 1" x 2" x 0.4" package with industry standard footprint.

		Advantech introduces PEC-3710 integrated I/O controller - 05/24/11 PEC-3710 has an AMD LX800 500 MHz controller with 16-channel analog input, 4-channel analog output and 32-channel isolated digital input/output.

		Pentek adds CompactPCI to Cobalt Virtex-6 boards - 05/23/11 The Cobalt A/D and D/A I/O board family is now available for use in CompactPCI (cPCI) systems.

		Semaphore Releases Kingfisher Plus+ Hardware Modules - 05/11/11 IO-5, PS-12 and PS-22 I/O and power supply modules work with the Kingfisher Plus+ SCADA system RTU product line.

		ACS introduces SPiiPlus IOMnt EtherCAT digital I/O modules - 05/09/11 The I/O modules have up to 32 inputs and 32 outputs and an EtherCAT interface, meet EN 61131-2, type 3 (24V source type) and are functionally and pin compatible with Beckhoff EL1862/1872.

		LogicBeach announces ILIM-2 Digital Input Module - 05/05/11 The ILIM-2 connects to the IntelliLogger System Base adding event, counter, and frequency inputs as well as additional outputs.

		National Instruments releases cRIO-9075 and cRIO-9076 controllers - 05/04/11 Both CompactRIO systems combine an industrial 400 MHz Freescale real-time processor and four-slot chassis with an embedded FPGA for custom timing, control and signal processing capabilities.

		National Instruments announces two fast PXI Express products - 05/04/11 Products include the PXIe-6674T timing and synchronization module and the PXIe-PCIe8388 remote controller.

		EGE announces amplifier for flow controllers - 05/04/11 Amplifier has a voltage range of 85-264 Vac and a compact design with a width of only 23 mm.

		WAGO introduces J1939 Interface function block - 04/21/11 J1939 Interface function block increases large engine efficiency by tracking, and reacting to, engine performance parameters

		Phoenix Contact introduces SafetyBridge I/O modules - 04/06/11 SafetyBridge I/O modules include 14 different safety-relevant function modules, from a simple Emergency Stop up to various muting blocks.

		Phidgets releases InterfaceKit 2/2/2 - 04/03/11 InterfaceKit 2/2/2 provides 2 Analog Inputs, 2 Digital Inputs and 2 Digital Outputs on a board the size of a dongle. Price: $50.00 CAD.

		Data Translation Announces DT9826 DAQ module - 03/24/11 DT9826 combines 24-bit analog measurement, digital I/O, counter/timers, and a tachometer channel onto a single USB plug-and-play device.

		Acromag releases VPX Carrier Cards - 03/23/11 VPX4810 3U VPX carrier cards provide a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system.

		Knick releases VariTrans A 21000 P0 signal isolator - 03/17/11 The signal isolator has an integrated universal power supply for international use, and can be operated with 24-110 Vdc supply voltages as well as 110-230 Vac.

		Mesa Electronics introduces 7I61 Anything I/O module - 03/17/11 The 7I61 has 96 bits of programmable user I/O, a Spartan 6 FPGA, and a USB port for downloading initial configurations.

		ASI releases EZ Jump Terminal Blocks for PV applications - 03/16/11 The complete line of DIN rail mounted IEC terminal blocks are rated at 1000V DC for solar photovoltaic (PV) applications.

		Yokogawa releases new modules for STARDOM Control System - 03/15/11 The new STARDOM modules include turbomachinery control, a frequency input module for wind turbine blades, and an upgraded CPU module for oil and gas upstream processes.

		Deeter Group introduces Wireless Sensor System - 03/15/11 At the centre of the Deeter Wireless Sensor System is the simple-to-use Base Station designed to receive data from remote wireless devices such as the Deeter Liquid Vertical Sensor (LVCS-RF) or Wireless Sender.

		Baldor introduces HMI operator panel with CANopen interface - 03/15/11 The new KPD202-501 operator panel features a backlit 4-line x 20-character LCD surrounded by six programmable function keys, enabling multiple-choice menus to be presented to the machine operator.

		Schmersal releases modular e-stop & pushbutton control stations - 03/15/11 The Series BDF control station provides operators and maintenance personnel with the ability to E-Stop, control start up, reset and select the appropriate mode of machine operation in a single housing.

		Baumer releases Hygienic Photoelectric and Inductive Sensors - 03/14/11 The new sensors with their smooth, groove-free V4A stainless steel housings, as well as the mounting accessories, are EHEDG-certified, Ecolab-approved, and the materials are FDA-compliant.

		Advantech launches APAX-5018 12-Channel Thermocouple Module - 03/14/11 The APAX-5018 offers a 12-channel high density analog input solution for reading thermocouple sensor data, saving dimension and installation costs, and satisfying various application needs.

		Hilscher releases netLINK PROFIBUS-DP to PROFINET Proxy - 03/13/11 netLINK PROXY integrates any PROFIBUS-DP Slave device into any PROFINET network. By mounting the netLINK directly on the Profibus-DP D-sub connector, the netLINK plug operates as a PROFINET IO-Device.

		ASI introduces Rutaseal Grommets - 03/13/11 These grommets are a quick and easy way to feed cable through an enclosure wall or panel while still maintaining a protection level of IP67 or NEMA 4X.

		Calex announces 0-10V Load Cell and Strain Gage Signal Conditioner - 03/13/11 The Model 4710 is a DIN Rail mount, self-contained DC powered module designed for load cell, strain gage, or single ended analog amplification and filtering.

		Hilscher announces netBRICK gateway for harsh environments - 03/09/11 The IP67 gateway utilizes M12 connectors for connectivity to industrial automation networks like CANopen, DeviceNet, PROFIBUS, CC-Link, EtherCAT, Ethernet/IP, Modbus TCP, POWERLINK, PROFINET, SERCOS III, MB/RTU, ASCII, RS232-, RS422, and RS485.

		Beckhoff releases IP 67 EtherCAT Box with Analog IO - 03/08/11 EP4374 I/O box is a flexible, moisture and dust-resistant EtherCAT I/O solution that combines two analog inputs and two analog outputs into one device.

		Global Automation Products sells Tracker 300+ Series to the U.S. Market - 03/08/11 The Tracker 300+ Series range of programmable instruments, which includes signal conditioner, PID controller, and trip amplifier functions, are equipped with RS485 serial communications.

		WAGO introduces JUMPFLEX Interface Adapter - 03/08/11 Interface Adapter provides JUMPFLEX signal conditioners and relays with a tool-free interface to the WAGO-I/O-SYSTEM or other PLC interfaces.

		Weidmuller introduces TERMOPTO Solid-State Relays - 03/08/11 The TERMOPTO functions as both a terminal block for signal connection, and a relay to separate signals, all in one compact module.

		Optex FA announces stainless steel ZM Series photoelectric sensor - 03/06/11 The self-contained sensor has the ability to meet severe environmental demands such as high pressure, high temperature detergent washing, thus, reducing sensor replacement costs.

		RC Systems introduces Rig Protector critical remote monitoring system - 03/06/11 The wireless option transmits up to four points of Modbus data up to 10 miles with a high gain mast mounted antenna or 3000' with the standard dipole antenna.

		NI adds gateway and voltage/RTD node to Wireless Sensor Network - 03/02/11 The NI 9792 is a programmable gateway that can communicate with measurement nodes as well as other hardware through a variety of open communication standards. The NI WSN-3226 allows RTD and potentiometer measurements.

		Fujitsu announces PCI Express connectors for harsh environments - 03/02/11 The split-beam contact design ensures redundant, two-points of contact on the PCB pad, providing a reliable and robust connection against vibration, shock and temperature changes.

		CONEC releases non-magnetic D-Sub I/O connector - 03/01/11 For use in areas with high magnetic fields, the usual steel shells and hardware are replaced with tin-plated brass and brackets of diecast zinc.

		Calex iintroduces FBW Series 400W DC/DC Converter - 02/27/11 The FBW Series offers 9-36 VDC and 18-75 VDC input range in a 4.6" x 2.4" x 0.55" high package.

		IXXAT introduces FR-IB100/PCIe FlexRay PCIexpress I/O card - 02/15/11 The card features an on-board 32 bit microcontroller system and two FlexRay channels with a Freescale MFR4310 protocol chip and provides a 100 ns time stamp resolution.

		DGH announces D6000 analog input modules - 02/14/11 The D6000 series allows sensors to be interfaced to any computer or processor-based equipment that contains a serial port. Price: From $245.

		Meggitt Announces Endevco model 126 DC Signal Conditioner - 02/14/11 Model 126h as a wide bandwidth to 200 kHz (-3 dB corner), allowing it to be used with bridge-type or differential output accelerometers and pressure transducers.

		Acromag releases XMC-SLX mezzanine modules - 02/09/11 XMC-SLX has a Xilinx Spartan-6 FPGA. Typical uses include hardware simulation, in-circuit diagnostics, communications, signal intelligence, and image processing. Pricing starts at $2895.

		ITT Cannon signs Digi-Key as distributor - 02/08/11 Products from ITT Cannon are now available from Digi-Key's websites and will be in future print and online catalogs.

		McCrometer releases RemoteCONNECT Telemetry System - 02/08/11 RemoteCONNECT provides pump monitoring, notification and control capability through wireless remote communications to meet WQT05 criteria.

		Phoenix Contact announces MINI Analog transducer - 02/03/11 MINI transducer for potentiometers can convert and isolate an analog signal from the 0 to 100 kOhm range.

		Laurel Electronics announces Model QLS loop splitter - 02/02/11 Model QLS provides up to four independently adjustable 4-20 mA outputs from a single input.

		Beckhoff Introduces ET Bus Terminals for Extreme Climates - 02/02/11 Extended Temperature (ET) Bus Terminals work in operating temperatures between -4 and 140°F (-20 and +60°C),

		Dwyer introduces Series MTL 20/30 USB Data Logger - 01/27/11 Series MTL measures and records accurate readings for temperature or temperature/humidity/dew point in a wide range of applications.

		Saelig introduces USB DrDAQ oscilloscope and datalogger - 01/19/11 The combination scope/data-logger/IO board offers a collection of 15 I/O channels in a compact, low-cost device. Price: $159.

		Acromag announces Model ST131 RTD signal conditioner - 01/18/11 Selling for $89, this DIN Form B head-mount instrument will convert the input signal from any 100 ohm Platinum RTD sensor to a highly accurate, loop-powered 4-20mA output.

		IXXAT introduces CANio 500 I/O gateway for CAN and CANopen systems - 01/13/11 I/O gateway provides easy and quick connection of analog and digital input and output signals to CAN and CANopen systems.

		Belden introduces two AS-Interface modules - 01/12/11 The unnamed devices are slave modules with four digital inputs for two- or three-wire sensors and four digital outputs for standard actuators.

		Cyber Sciences introduces SER-3200 sequence of event recorder - 01/12/11 SER-3200 provides precision time-stamped event reporting for 32 high-speed digital input channels. Data is available over an Ethernet network using a standard web browser or via Modbus TCP/IP.

		National Instruments Introduces PXIe-449x Modules for Signal Acquisition - 01/06/11 The modules provide AC/DC coupling both for sensor measurements with a microphone or accelerometer and voltage measurements from a tachometer or device under test.

		CAS DataLoggers releases LogMessage Stand-Alone Data Logger - 12/30/10 LogMessage provides a complete, cost effective, easy to use solution for data collection, control and alarming in a single compact stand-alone package.

		National Instruments announces two PXI Express chassis - 12/19/10 PXIe-1078 nine-slot and NI PXIe-1071 four-slot chassis take advantage of the latest PXI Express modules and controllers and are backward compatible with existing PXI modules.

		Advantech announces RTD and Analog Input Modules - 12/19/10 I/O modules includes APAX-5013 8-channel Resistive Thermal Device (RTD) module and APAX-5017H 12-channel High Speed Analog Input module.

		OPTEK announces OPI1268S Optoisolator for hazardous Applications - 12/16/10 OPI1268S optical isolator has 20KV isolation and 2Mbit/s data transmission rates, and complies with ATEX and ICEex certifications for electrical equipment used in hazardous areas

		Banner adds Housing to DX99 Wireless Nodes - 12/14/10 A compact metal housing rated for Class I, Division 1 hazardous locations is available for the intrinsically safe DX99 Wireless Node product line.

		Invensys Introduces HART Migration for Fisher PROVOX - 12/14/10 Fisher PROVOX users can upgrade to the Foxboro I/A Series DCS, taking advantage of HART field communications functionality, without the need for rewiring.

		Opto 22 introduces SNAP-SCM-SSI I/O module - 12/07/10 SNAP-SCM-SSI I/O module provides two isolated serial synchronous inputs (SSI) for acquiring data from optical and mechanical encoders and linear and rotary transducers.

		ConTech announces KMW Series DC/DC converters - 12/07/10 KMW Series offers up to 30 Watts of fully regulated output power with an industry standard 2 x 1.6” footprint.

		HEIDENHAIN introduces EIB 741 external interface box - 12/07/10 Measuring solution removes the requirement of a PC interface card when connecting measurement apparatus to an industrial PC or laptop.

		CAS announces dataTaker DT82EM Intelligent Data Logger - 11/24/10 DT82EM provides a turn-key solution to capturing data, uploading data via email or FTP and sending alarms as email or SMS messages.

		Vecow Introduces MP/ME Series Data Acquisition Card - 11/23/10 This 32-CH, 16/18-Bits resolution DAQ card features 32 single-ended analog inputs, 2 analog outputs, 48 digital I/O lines and, 2 counters with 32 bits resolution.

		National Instruments introduces four FlexRIO modules - 11/17/10 The four adapter modules are ideal for real-time measurements, nondestructive test (NDT) and ultrasound applications, communications systems and scientific research.

		Calex announces HE triple output DC/DC converters - 11/17/10 HE triple series utilizes a fully encapsulated construction with an aluminum baseplate for thermal management.

		Sealevel Systems announces two digital I/O modules - 11/17/10 SeaI/O-530 and SeaI/O-540 have open-collector outputs and optically isolated inputs to interface to a variety of real-world I/O.

		Trio Motion introduces CAN I/O expansion modules - 11/08/10 Products include 16-point digital input and output modules, an 8-input + 4 output analogue module, and an 8-channel relay output module.

		Weidmuller introduces ACT20X isolators for hazardous areas - 11/07/10 Intrinsic safety signal conditioners include modules that can convert and isolate digital signals to and from hazardous areas, as well as versions that isolate and drive digital actuators.

		CAS Datalogger Introduces Expert Key Series 100 DAQ System - 11/03/10 The Expert Key 100 Series has 14 analog inputs that can be attached to RTD Sensors, Thermocouples, Voltage or 4-20 mA signals

		Acromag releases MIL-STD 1553 bus modules - 10/28/10 MIL-STD 1553 bus modules interface avionics and weapons subsystems to an embedded control system.

		ACS adds EtherCAT to SPiiPlus motion controllers - 10/26/10 SPiiPlus EtherCAT Master enables users to link together up to 32 axes of drives and I/O that comply with the CANOpen Over EtherCAT (CoE) protocol.

		Dataforth announces 8B isoLynx SLX300 DAQ system - 10/21/10 Using industry standard Modbus RTU or TCP protocols, the 8B isoLynx SLX300 enables communication with a broad range of existing third-party software tools and HMI/SCADA packages.

		Dwyer introduces Series DW-USB-LCD USB Data Logger - 10/14/10 The portable data logger displays and records temperature, humidity and dew point.

		ConTech announces SMW Series of DC/DC converters - 10/06/10 The series offers a 4:1 input range with nominal input voltages of 24VDC and 48VDC. Single outputs offered are 3.3, 5, 12, and 15VDC. Dual outputs are ±5, ±12, and ±15VDC. Price: $17.06.

		Siemens adds I/O modules to Simatic s7-1200 controller - 09/28/10 The analog and temperature I/O modules can be DIN-rail or panel mounted and easily connect to the right-side backplane of an S7-1200 CPU.

		GE announces VME-6500 6U VME Multifunction I/O Board - 09/28/10 VME-6500 delivers in a single chassis slot the analog and digital I/O capabilities that could previously have occupied four slots.

		National Instruments Introduces PXIe-4331 Data Acquisition Module - 09/26/10 PXIe-4331 is a simultaneous high-speed bridge input module that provides signal conditioning for dynamic measurements from strain, pressure, torque and load sensors.

		Software Toolbox Updates OmniServer Data Acquisition Software - 09/23/10 OmniServer now offers support for OPC UA, providing the ability to acquire data from miscellaneous, non-standard devices such as barcode readers, scales, printers, gauges and other instruments.

		Data Translation announces DT8824 data acquisition module - 09/23/10 The highly accurate front-end of the DT8824 offers simultaneous sampling of up to four fully isolated 24-bit inputs.

		Acrosser announces AR-B104D CAN bus I/O module - 09/23/10 AR-B104D has a PCI-104 interface CAN bus, 24 channel digital I/O and SRAM module.

		Invensys introduces Eurotherm nanodac recorder/controller - 09/20/10 The nanodac recorder/controller provides 50 megabytes of flash memory for data storage, as well as an on-screen help system and remote viewing functionality.

		Balluff introduces CC-Link machine mount I/O - 09/19/10 Product line includes heavy duty machine mount I/O modules, supporting cordsets, and connectivity accessories for a CC-Link fieldbus network.

		T&D introduces RTR-574 data logger - 09/07/10 Wireless 4 Channel Logger monitors Illuminance, Ultra-Violet, Temperature and Humidity.

		Calex announces Model 8505 analog to frequency converter - 09/02/10 Model 8505 converts a 4-20 mA sensor output into a PLC frequency input. Price: from $83.30

		Acromag releases two CAN bus modules - 08/31/10 IP560 and IOS-560 CAN bus modules interface network network sensors and actuators to embedded monitoring and control systems.

		National Instruments Introduces PXIe-4844 optical sensor interrogator - 08/26/10 PXIe-4844 is a two-slot 3U PXI Express module for fiber Bragg grating (FBG) sensors.

		B&B introduces Zlinx Xtreme Wireless I/O Modules - 08/24/10 Outdoor-Rated Radio Modems and I/O Modules are available in 900 MHz for long-range and 2.4 GHz for short-range wireless communications for serial or sensor data in harsh and remote environments.

		Ethernet Direct releases RWM-824 Web-based I/O module - 08/18/10 RWM-824 features a built-in web server and provides 8 isolated output and 8 digital input channels.

		Advantech announces USB-4620 5-Port USB Hub - 08/12/10 USB-4620 has isolation protection up to 3,000 Vdc for each downstream port, making every USB device connected with the USB-4620 safe and protected.

		Phoenix Contact releases DIN rail for wireless applications - 08/11/10 The rail has components typically used in wireless remote monitoring and control applications, especially in the oil and gas, water/wastewater and electrical utility industries.

		Beckhoff Introduces BK9053 PROFINET Bus Coupler - 08/05/10 BK9053 makes 400 different Beckhoff Bus Terminals available to PROFINET users. Price: $235.00

		Advantech Introduces PCIe-1744 Analog Input Card - 08/05/10 PCIe-1744 4-channel, 12-bit, ultra high-speed analog data acquisition card has a PCI express interface.

		National Instruments Introduces X Series DAQ for USB - 08/04/10 USB X Series DAQ devices include up to 32 analog inputs, four analog outputs, 48 digital I/O lines and four counters.

		National Instruments Introduces Ethernet-based CompactDAQ - 08/04/10 CompactDAQ modular data acquisition system combines the ease of use and low cost of a data logger with the performance and flexibility of modular instrumentation.

		NI enhances LabVIEW FPGA and C Series I/O - 08/04/10 NI 9157 and NI 9159 MXI-Express RIO chassis and NI 9148 Ethernet RIO chassis contain a Xilinx FPGA that is programmable with LabVIEW.

		Siemens introduces Simatic SM 326 failsafe digital output module - 08/03/10 SM 326 F-DO 10 module improves system availability and eliminates nuisance-tripping with a “hold last value option” and by isolating faults to individual channels.

		Data Translation announces DT9836-S DAQ module - 07/31/10 The DT9836-S achieves a synchronous sampling rate of up to 800 kHz per channel and an overall sampling rate of 4.8 MHz.

		Beckhoff Announces 16-Channel EtherCAT I/O Box - 07/29/10 High density EtherCAT Box modules for mounting directly on machines significantly reduce I/O cabling effort and the price per channel.

		Pentek introduces Model 7191 Clock Synthesizer - 07/27/10 Model 7191 gives designers working with A/Ds and D/As a highly-precise clock source with custom frequency generation under simple software control.

		Advantech introduces APAX-5070 Modbus/TCP Remote I/O - 07/21/10 This Modbus/TCP coupler module allows any PC, controller, or HMI device that supports the Modbus/TCP protocol to add remote I/O functionality.

		Advantech introduces USB-4704 DAQ Module - 07/14/10 USB-4704 8-channel multi-functional module with analog I/O, digital I/O and counter functions is specifically recommended for students or trainees.

		Kistler Announces Type 5697-DAQ for Force Measurements - 07/07/10 Type 5697-DAQ captures and analyzes data in applications where single or multi-component force sensors and dynamometers are in use.

		Data Translation releases Windows 7 drivers for DAQ boards - 07/01/10 64-bit drivers for USB, Ethernet and PCI data acquisition boards are compatible with Windows 7.

		Deeter Electronics releases wireless Sender module - 06/28/10 The Sender will transmit sensor data at regular intervals to a Base Station for conversion to process system outputs and alarms. .

		TURCK introduces FAS20 I/O Stations for AS-interface - 06/27/10 FAS20's compact size and DIN-rail mounting option makes them suitable for upgrading existing panels in batch processing, pharmaceutical and material handling applications.

		Pepperl+Fuchs introduces AS-Interface relay Module - 06/24/10 VBA-4E4A-KE-ZE/R provides 4 inputs and 4 relay outputs in a single housing.

		Keithley Introduces KUSB-488B USB-To-GPIB Adapter - 06/24/10 Model KUSB-488B's driver library is fully command-compatible with Keithley's and National Instruments' command set, making it plug-and-play compatible with existing applications.

		Onset expands data logger energy measurements - 06/22/10 HOBO U12 data loggers can now measure and record kilowatts, air velocity, gauge pressure, differential pressure, DC current and other energy and environmental parameters.

		ifm efector Introduces TP3237 RTD Temperature Transmitter - 06/22/10 TP3237 transmitter turns any Pt100 or Pt1000 RTD probe (2, 3 or 4-wire) into a programmable transmitter.

		UEI Releases DNx-DIO-4x2 Relay Output Boards - 06/22/10 Relay boards have 12 independent Form C (SPDT) relays and 125 Hz switching rates for switching and digital control applications.

		Phidgets introduces 1047-PhidgetEncoder - 06/20/10 1047 encoder can read up to four encoders simultaneously with a 1μs time resolution. Price: $100.

		WinSystems introduces PC/104 A/D and D/A Modules - 06/16/10 The PCM-MIO-G-AD-1 is a 16-channel, 16-bit analog input card and the PCM-MIO-G-DA-1 is an 8-channel, 12-bit analog output card.

		Beckhoff Automation adds DMM to I/O Terminals - 06/15/10 EL3681 and KL3681 terminals have digital multimeters built directly into I/O nodes.

		Pentek announces 71660 fast data acquisition module - 06/15/10 The four 200 MSPS, 16-bit data acquisition channels of the 71660 deliver nearly 90 dB of spurious free dynamic range, allowing users to detect small signals of interest surrounded by large interferers.

		Pepperl+Fuchs updates scanners for Allen-Bradley PLCs - 06/13/10 AS-Interface Scanners and Gateways for Allen-Bradley PLCs now satisfy all aspects of AS-Interface specification 3.0.

		Calex announces HE Series DC/DC converter - 06/13/10 The HE triple output series offers a primary output of either 3.3VDC or 5VDC and auxiliary outputs of either ±12VDC or ±15VDC.

		Emerson introduces Ovation Ethernet I/O Module - 06/09/10 Link Controller I/O Module offers I/O-level Ethernet interface capability that is tightly coupled with the Ovation expert control system.

		Macro Sensors releases EAZY-CAL LVDT signal conditioner - 06/08/10 Supporting most manufacturers’ LVDT position sensors with plug and play compatibility, the EAZY-CAL can be remotely located by up to 100+ feet.

		Dataforth Introduces DSCP Signal Converters - 06/03/10 DSCP signal converters includes seven different models, each housed in an ultra-slim 6.2mm case.

		National Instruments Introduces SC Express DAQ modules - 05/25/10 SC Express data acquisition (DAQ) modules have integrated signal conditioning for scalable, high-performance measurements on PXI Express.

		Saelig announces R-LITE GSM/GPRS Remote DAQ System - 05/20/10 R-LITE's internal quad-band GSM modem allows maintenance and configuration to be done either locally, via cable, or remotely via cell-phone or modem.

		Stellar releases AP5101l Amplifier for DC Strain Gages - 05/18/10 The AP5101 provides up to 10V output or 4-20 output with transducer signals from 10mV to 10V, and incorporates a DC-DC converter to ensure that the output is electrically isolated from the supply.

		National Instruments reaches 100 C Series Modules - 05/17/10 C Series modules fit into any of the C Series family of chassis including NI CompactDAQ, NI CompactRIO and the NI R Series expansion chassis.

		R. STAHL enhances IS1 remote I/O system - 05/12/10 IS1 remote I/O solution is now capable of EtherNet/IP communication.

		Data Translation announces DT 9837B USB DAQ module - 05/11/10 The DT 9837B module for noise and vibration has four analog inputs for IEPE/ICP sensors and a tachometer input for measurements from rotating components.

		IMI Sensors Announces ICP Vibration Transmitter - 05/10/10 Model 682A09 installs in line with any industrial accelerometer and converts the vibration signal to a 4-20 mA velocity output.

		Semiconductor Circuits introduces CPT7B48 DC-DC converter. - 05/09/10 Open frame module provides 84W of 12V power for distributed power architecture applications or as a fully regulated intermediate bus converter.

		Honeywell introduces Safety Manager Remote I/O module - 05/05/10 Each channel of the module can individually be configured to a different I/O type, which provides more flexibility to design safety solutions.

		Phidgets releases 1132 4-20mA Adapter - 05/03/10 Adapter allows users to integrate 4-20mA industrial sensors into their projects. Price: $30.

		WinSystems announces PXM-MiniPCIe wireless module - 05/02/10 PXM-MiniPCIe SUMIT-ISM module supports PCI Express MiniCards and two expansion USB connectors. It supports 802.11 a/g wireless, WLAN, and other high-performance communication functions

		Moore Industries obtains UL approval for Signal Conditioners - 04/29/10 The 2-channel MIT and the 2- and 4-channel MIX miniMOORE products now meet UL 508 criteria—the UL safety standard for industrial control equipment.

		Phidgets announces 1048 TemperatureSensor - 04/29/10 1048 TemperatureSensor can take up to 4 thermocouples with stripped ends that connect to the board's terminal blocks.

		Semaphore enhances Kingfisher RTU - 04/29/10 Enhanced features of release 2285 include image capture in conjunction with an IP camera, network time protocol (NTP) client functionality, and support for more than 150,000 events.

		Access I/O releases PICO-II8IDO4A I/O Module - 04/27/10 PICO-II8IDO4A has 8 optically isolated inputs, 4 fully protected solid state FET outputs capable of switching up to 3A each, and two 16-bit analog inputs.

		Measurement Computing releases LGR-5320 data logger - 04/27/10 LGR-5320 allowsusers to collect high-speed correlated analog and digital data without a computer.

		TURCK announces IM21 rotational speed interface module - 04/25/10 The modules employ FDT/DTM software, together with PACTware, enabling users to efficiently set and save multiple application parameters.

		Stellar releases AP5104 DIN-Rail amplifier for LVDTs - 04/25/10 The AP5104 provides regulated AC excitation with remote sensing capability for cable runs exceeding 20 feet.

		Micronor introduces MR266/MR267 Remote Control Potentiometers - 04/21/10 The products have 4-20mA or 0-10V input/output interface for compatibility with PLCs, DCSes, A/D, D/A and other control devices.

		Stellar announces AP5102 DIN rail amplifier for LVDTs - 04/19/10 The AP5102 produces analog outputs of 0-10 Vdc, ±10 Vdc, or 4-20 mA, and incorporates a DC-DC converter which ensures that the output of the unit is isolated from the supply. Price: $360.

		Pickering Interfaces releases PXI devices - 04/14/10 Equipment includes devices for PXI interfacing, fault insertion, RF and high current applications.

		National Instruments introduces USB-TC01 temperature DAQ device - 04/08/10 USB-TC01 USB data acquisition (DAQ) device measures and records temperature data from a thermocouple. Price: $99.

		AMCI releases 7160 Series SSI module for MicroLogix I/O - 03/30/10 7160 Series adds the ability to monitor rotary and linear applications to Allen-Bradley 1762 MicroLogix I/O.

		Phidgets releases 1134 Switchable Voltage Divider - 03/29/10 The 1134 Provides an interface to variable resistance sensors such as force sensing resistors, light sensors, thermistors and bend sensors. Price: $15.00

		Opto 22 releases SNAP-AIRTD-10 analog input module - 03/25/10 SNAP-AIRTD-10 provides two channels of analog temperature input from 10-ohm copper RTDs, which makes it suited for deployment in older installations. Price: $245.00

		UEI releases DNA and DNR analog input boards - 03/17/10 The boards provide 16 fully differential channels of 24-bit, analog inputs with seven software programmable input ranges from ±10 to ±0.156 Volts full scale.

		Calex announces 8940 Series thermocouple signal conditioner - 03/16/10 The 8940 Series is for use with 100, 500, and 1000 ohm Platinum RTDs with a temperature range of -50°C to 450°C. Price: $140.

		M2M updates Netbiter EasyConnect portal - 03/15/10 Enhancements include plug’n’play installation of wireless devices, and secure access of firewall protected equipment.

		ITT introduces PCMCIA I/O card kits - 03/09/10 Snap-on and ultrasonic PCMCIA I/O kits feature standard card end closure moldings along with the ability to accommodate specialized end caps or extension box designs. Price: from $1,20.

		ACCES I/O releases USB-AO Series analog output modules - 03/07/10 The USB-AO Series includes 10 models with list prices ranging from $299 to $699.

		Data Translation releases DT 9824 analog input module - 03/07/10 USB module achieves resolutions up to 0.07 µV. Its low temperature drift and high common mode rejection >150 dB set new standards in compact USB data acquisition.

		Beckhoff adds TwinSAFE terminals to EtherCAT I/O - 03/02/10 Rated for SIL 3 and conforming to IEC 61508 and EN ISO 13849-1 PL e, TwinSAFE terminals for EtherCAT are certified for use throughout North America.

		National Instruments adds Vision to CompactRIO - 02/28/10 National Instruments added machine vision capabilities to CompactRIO and single-board RIO hardware devices.

		National Instruments announces FlexRIO FPGA modules - 02/28/10 PXIe-796xR FPGA modules feature DSP-focused Xilinx Virtex-5 SXT FPGAs with optimized DSP blocks to streamline operations such as fast Fourier transforms.

		Siemens announces Sitrans RD500 remote data manager - 02/26/10 The Sitrans RD500 integrates Web access, alarm event handling and data capture for remote installed process instruments into a single device.

		OPTEK announces OPI1268 high-voltage optoisolator - 02/23/10 OPI1268 optoisolator is for power isolation in high voltage PC board circuits in industrial electronics systems. Price: $3.48.

		GE introduces 125Vdc input module for PACSystems RX3i - 02/18/10 Input module provides interface between the RX3i and external input devices such as sensors, push buttons, and switches.

		Honeywell announces Universal I/O wireless transmitters - 02/11/10 Universal I/O wireless transmitters send signals from devices with a high-level analog, temperature or milli-volt, or contact-closure switch output.

		Kepware enhances KEPServer EX - 02/08/10 Enhancements in KEPServerEX version 5.2 include an OPC UA Client and Server, an Alarm and Event Condition option, and updated Mettler Toledo and IDEC Drivers.

		Data Translation announces DT9824 USB data acquisition module - 02/03/10 The USB-powered DT9824 allows users to simultaneously sample up to four fully isolated 24-bit inputs, with complete signal measurement protection from all environmental or system noise. Price: $1695.

		Calex introduces Model 85xx thermocouple signal conditioner - 02/01/10 Models 8511 and 8512 convert Type J and K thermocouples, respectively, to an output frequency of 100Hz at 0°C to 5100Hz at +500°C, with 12 bit resolution. Price: $100.

		ASI introduces X756890 programmable temperture converter - 01/31/10 X756890 temperature to analog signal converter handles a range from -200 to +2400º C.

		WAGO announces JUMPFLEX 857-819 mV signal conditioner - 01/21/10 857-819 mV signal conditioner accepts bipolar mV inputs from -100 mV to +1000 mV, and converts to a current or voltage output.

		CAS introduces DT82E data logger for environmental applications. - 01/21/10 DT82E stand alone, low power data logger supports SDI-12 sensors, USB memory sticks, 18 bit resolution, and RS232, Ethernet and USB communications.

		TandD introduces TR-74Ui illuminance data logger - 01/19/10 TR-74Ui simultaneously measures and records four parameters: illuminance, ultraviolet light (UV), temperature and humidity.

		Rockwell Automation announces Bulletin 931 signal conditioners - 01/14/10 Bulletin 931 analog signal conditioners isolate multiple signals on the same power source, reducing ground loop and common mode noise.

		Calex releases EFIL-100-10 filter for DC/DC converters - 01/13/10 An EFIL-100-10 can be used as the front end for multiple DC/DC converters as long as the total input current does not exceed 10 ADC.

		Beckhoff introduces EL3201-0020 temperature measurement terminal - 01/12/10 EL3201-0020 EtherCAT Terminal provides measurement accuracy of ±0.1 K of the temperature measuring range.

		Stellar Technology announces AP5201 strain gage amplifier - 01/10/10 Series AP5201 in-line amplifier provides filtered analog output of ±5Vdc, ±10Vdc, or 4-20 mA.

		MEDER announces miniature SIL HV Series relays - 01/10/10 This series can switch up to 1000 volts and carry up to 5 amps for up to 50 milliseconds at a consistent repetition rate or 10 amps at pulsed current for up to 10 micro-seconds.

		Signatec releases PX1500-4 PCI-Express digitizer - 01/10/10 The PX1500-4 captures four synchronized channels at sampling rates up to 1.5 GHz, or two synchronized channels up to 3 GHz when interleaving the ADC data.

		Measurement Computing announces USB-2001-TC temperature DAQ - 01/06/10 USB-2001-TC 20-bit, thermocouple data acquisition device measures temperatures over the ranges defined by NIST J, K, R, S, T, N, E, and B thermocouple types.

		TURCK releases RFID-S Slices - 01/04/10 RFID-S has two channels of RFID per slice, and up to four slices may be added to each node - resulting in up to eight channels of RFID per node.

		Data Translation releases DT 8837 instrument module - 12/21/09 DT 8837 has four IEPE/ICP sensor inputs for applications that require sound, vibration or sonar measurements.

		AutomationDirect releases DIN-rail signal conditioners - 12/20/09 Signal conditioners convert, isolate and transmit signals from a wide variety of process sensor and controller I/O.

		HEM announces Mini ADAC data logger - 12/15/09 The 8 channel logger acquires a variety of inputs including voltages, currents, temperatures, and converts pulses to counter/timer signals.

		AMCI releases 7272 I/O modules for for EnDat encoders - 12/10/09 The 7272 module connects EnDat encoders to the 1756 ControlLogix PLC.

		TandD announces TR-77Ui temperature & humidity logger - 12/07/09 TR-77Ui has a wide range from 0 to 99% relative humidity and a temperature range from -30° to +80°C.

		Acromag introduces I/O Server industrial PC - 11/23/09 I/O Server fanless computer for mobile or embedded I/O applications features a built-in carrier card that holds up to four mezzanine I/O modules. Price: from $2195.

		Measurement Computing announces USB-501-PRO temperature logger - 11/23/09 Data logger has a rugged, stainless steel body with an IP67 rating for harsh environments. Price: $150.

		TC Communications introduces TC3846 IP gateway - 11/19/09 TC3846 IP Gateway extends 600Ω analog connections and dry contacts across Layer 2/3 Ethernet networks.

		HMS introduces CANopen module for Siemens ET200S - 11/18/09 1SI CANopen extension module provides CANopen connectivity to the SIMATIC ET200S distributed I/O system, allowing integration of CANopen devices into the Siemens automation architecture.

		Reliable Controls releases MACH-ProPoint input expansion module - 11/17/09 Input expansion module works with a MACH-ProCom or MACH-ProSys controller.

		DSPCon adds signal conditioning to DataFlex DAQ system - 11/11/09 DataFlex-1000 and DataFlex-1000A are now available with fully-integrated, built-in signal conditioning.

		Pepperl & Fuchs introduces LB/FB remote I/O systems - 11/09/09 LB/FB systems support general-purpose or intrinsically safe applications with modules that can be mixed and matched on the same backplane.

		National Instruments announces four tough RIO devices - 11/01/09 NI sbRIO-9602XT, sbRIO-9612XT, sbRIO-9632XT and sbRIO-9642XT devices are designed for board-level OEM applications requiring extended temperature operation.

		Advantech announces USB-4702 DAQ for testing/lab use - 10/27/09 USB-4702 is a 8-channel, 12-bit, 10 kS/s multifunction USB DAQ module for testing, lab, student or training use.

		ACCES I/O announces PCIe-DIO-48S Digital I/O - 10/22/09 PCIe-DIO-48S is a 48-channel PCI Express (PCIe) card for use in a variety of digital I/O applications.

		Innovative Integration introduces X5-G12 wireless digitizer - 10/07/09 The X5-G12 I/O module can be used as a front end digitizer for 3G/4G wireless receivers.

		National Instruments enhances CompactDAQ - 10/06/09 cDAQ-9174 four-slot and cDAQ-9178 eight-slot CompactDAQ can take mixed-sensor measurements at different rates and simultaneously perform multiple, high-speed operations.

		MKS enhances SenseLink QM DAQ system for injection molding - 10/01/09 Version 2.2 adds multivariate analysis (MVA) with partial least squares (PLS) modeling for improved real-time quality monitoring and fault detection in injection molding.

		Emerson enhances DeltaV - 09/29/09 Enhancements include S-series platform with “I/O on demand,” Electronic Marshalling, and fully redundant communications.

		On-Ramp announces ULP wireless sensor communication system - 09/16/09 Ultra-Link Processing can be used for monitoring in smart grid, industrial condition monitoring, location tracking and security sensing applications.

		Advantech releases PCM-3730I PCI-104 digital I/O - 09/13/09 PCM-3730I supports high-voltage isolation (2,500 VDC) on each input/output channel and resists noise interference while delivering reliable performance.

		Semaphore enhances data logging in T-BOX SCADA system - 09/10/09 Data archives and sampling tables can now be transmitted via SMS messaging.

		Mornsun America announces URB_LD-15W DC/DC converters - 09/09/09 Housed in a metal shielded package with an industry standard pin-out, URB_LD-15W has a 4:1 input range (9-36 or 18-72Vdc), suitable for a industrial and communications applications. Price: $16.30.

		Acromag releases 958EN signal conditioner Ethernet interface - 09/09/09 958EN provides an Ethernet interface for a rack of 8B signal conditioners to simplify data acquisition from a broad mix of analog isolation amplifiers.

		WAGO releases 16-Point Ribbon Cable I/O Modules - 09/09/09 The DIN-rail mount modules have 16 inputs, 16 outputs, or 8 inputs/8 outputs and an HE10 ribbon cable interface.

		Baumer introduces FlexConv signal converters - 09/08/09 Using the FlexProgrammer 9901, FlexConv series can be easily configured via a PC.

		Beckhoff announces EP1258 EtherCAT I/O Modules - 08/27/09 With its IP 67 housing, EP1258 can be installed in wet, dusty and otherwise harsh locations.

		ProSoft Technology releases wireless POINT I/O adapter - 08/27/09 ILX34-AENWG 802.11g I/O communication adapter offers a convenient wireless alternative for linking Rockwell Automation controllers to distributed process I/O modules.

		Crydom introduces CMX100D10 PCB-mounted solid state relay - 08/27/09 CMX100D10 DC output SSR is for high current applications such as heating, lighting and motion control,

		Data Translation releases DT-9818-32-OEM USB I/O board - 08/23/09 Board has 32 analog inputs, two analog outputs with 16-bit resolution, 16 digital I/O lines, two 32-bit counter/timers, and a USB 2.0 interface.

		Measurement Computing introduces DAQs with MBD protocol - 08/16/09 USB-7202 and USB-7204 use Message-Based DAQ (MBD), an O/S-independent protocol that allows DAQ devices to be programmed with simple text-based messages.

		Endevco announces Model 4990A signal conditioning system - 08/13/09 With 2,048 channels, Model 4990A can be used for both small- and large-scale testing applications, including NVH, modal and structural analysis.

		Phoenix Contact introduces RAD-ISM-900-EN-BUS 900 MHz radio for I/O - 08/11/09 The radio collects I/O without a remotely located PLC or I/O data concentrator. The bused I/O is made accessible to the network using the readily available MODBUS protocol.

		Dataforth enhances SCM5B48 accelerometer input module - 08/10/09 Enhancements to signal conditioning module include accuracy of 0.2% across all gain and excitation settings with no need for adjustment.

		National Instruments introduces PXI Express chassis and controllers - 08/10/09 Models include NI PXIe-8102/01 embedded controllers and the $1,499 (USD) NI PXIe-1073 chassis.

		Novotechnik releases MUP400 signal conditioner for position measurement - 08/10/09 MUP400 signal conditioner has 16-bit resolution and accuracy of ±0.01 of range +1 digit.

		National Instruments announces LabVIEW SoftMotion - 08/05/09 SoftMotion and C Series modules simplify the development of advanced single- and multi-axis motion applications.

		NI introduces 16 DAQ devices for PCI Express and PXI Express - 08/04/09 The 16 X Series DAQ devices provide enhancements to analog I/O, digital I/O, onboard counters and multidevice synchronization.

		Data Translation announces DT9818-32-OEM data acquisition board - 08/04/09 DT9818-32-OEM can embed high performance data acquisition capability directly into a USB system at approximately $40 per channel.

		B&B enhances Zlinx wireless I/O software - 08/03/09 Enhancements include peer-to-peer mirrored I/O mapping, superior low-latency response rates (8ms/digital), field calibration, user-defined fail-safe output states, and Modbus compatibility.

		Pentek releases 7800 series PCI Express I/O boards - 07/28/09 7800 series carrier board hosts a PMC/XMC module to fulfill a wide range of software radio, data acquisition and beamforming applications.

		National Instruments introduces PCI Express-Based I/O for LabVIEW - 07/27/09 PCIe-7841R, PCIe-7842R, PCIe-7851R and PCIe-7852R combine a Xilinx Virtex-5 FPGA, eight analog inputs, eight analog outputs and 96 digital I/O lines on a single board.

		National Instruments adds two modules to FlexRIO family - 07/27/09 NI 6581 100 MHz digital I/O (DIO) adapter module and NI 6585 200 MHz low-voltage differential signaling (LVDS) DIO module provide application-specific I/O for RF, digital, time-domain and vision inspection systems.

		Dataforth announces 8B33 True RMS signal conditioner - 07/27/09 8B33 accepts a single channel of AC input which is converted to its True RMS DC value, then filtered, isolated, amplified, and converted to a standard process voltage or current output.

		Acromag announces Ethernet analog output units - 07/26/09 ES2171 and ES2172 models each provide 16 channels of process current or voltage output control signals with 16-bit D/A resolution. Prices start at $1300.

		austriamicrosystems introduces AS1344 DC-DC converter - 07/23/09 AS1344 high voltage DC-DC boost converter is optimized for biasing of Photodiodes, LCD or PMOLED display powered from single cell batteries.

		Red Lion introduces XCGSM cellular modem expansion card - 07/20/09 Red Lion Data Stations or Modular Controllers equipped with an XCGSM card can send early warnings of process failures via text messaging and email.

		Advantech announces PCM-3813I analog input card - 07/19/09 PCM-3813I offers 2,500 VDC isolation protection and software programmable gain on each analog input channel, protecting computers and connected peripherals from high voltage damage on the input lines.

		TURCK adds FDT/DTM to IM Interface Modules - 07/16/09 To simplify device set-up and installation time, IM interface modules may now be programmed via a PC or on-board push buttons using FDT/DTM software.

		Omniflex releases LZ series current loop interface modules - 07/12/09 LZI and LZD are current loop interface modules that interface to field mounted transmitters in remote applications where signal isolation and surge protection is required.

		Acromag introduces Ethernet analog input units - 07/08/09 ES2163 and ES2164 perform 16-bit A/D conversion on up to 64 current or voltage inputs, and interface the signals to Ethernet devices or controllers with Modbus communications.

		Schneider Electric expands Zelio solid-state relays - 07/07/09 Additions to the line include the panel-mount (hockey puck-style) Zelio SSRP and the DIN-mount Zelio SSRD.

		DSPCon introduces DataFlex-515 battery-powered data recorder - 07/01/09 DataFlex-515 provides real-time playback, display and analysis, and a sustained, continuous recording speed of up to 256,000 samples per second.

		Pentek adds VxWorks to Model 4207 I/O Processor Board - 06/30/09 VxWorks Board Support Package (BSP) provides software developers with a complete library of hardware-initialization, control and application functions.

		Audon announces handheld temperture/humidity dataloggers - 06/28/09 Portable, battery operated stand-alone data loggers include models D3120, D3121 and D0321.

		Dajac announces Expert I/O 1000 USB module - 06/25/09 Expert I/O 1000 has 16 digital inputs, 16 digital outputs, 2 analog outputs, 6 analog inputs and 2 brush DC motor controllers with integrated amplifiers.

		Weidmuller releases WAVEPak DC/DC isolator for process applications - 06/25/09 WAVEPak interfaces between field equipment and control systems, converting and isolating signals with accuracy that exceeds 0.1%.

		Audon Electronics releases LabJack U6 USB DAQ - 06/18/09 LabJack U6 has 14 analog inputs with 16-18 bit resolution and a programmable gain amplifier, ideal for measuring real-world signals.

		Calex releases high voltage multiplier - 06/14/09 Devices are capable of handling AC inputs up to 5kV peak to peak, with AC input frequencies from 5kHz up to 100kHz.

		Measurement Computing releases USB-502-PLUS temperature/humidity logger - 06/14/09 Standalone data logger measures and stores up to 16,382 relative humidity and 16,382 temperature readings and calculates dew point. Price: $110.

		VEGA introduces VEGAMET 391 signal conditioner - 06/14/09 VEGAMET 391 can take a single 4-20mA analog or HART input, compute level, flow, totalization, distance, weight or temperature.

		Advantech releases PCM-3761I digital input card - 06/10/09 PCM-3761I is a form C type eight channel relay and eight channel isolated digital input PCI-104 card for machine and production automation.

		Eaton announces D93 series solid-state relays - 06/10/09 Solid-state relays perform many of the same applications that an electromechanical relay can perform.

		Honeywell introduces wireless discrete-input transmitters - 05/28/09 STXW 500 and STTW 401 transmitters can convert any measurement device with a contact-closure switch input into a wireless input.

		Advantech introduces two signal conditioning modules - 05/27/09 ADAM-3112 and ADAM-3114 can convert up to 400 VAC or 5 AAC signals to 0~5 VDC signals for data acquisition cards.

		Acromag announces Ethernet Analog I/O modules - 05/27/09 993EN and 994EN 16-channel analog input modules simplify installation and reduce the cost of interfacing sensor signals to remote controllers.

		GE Fanuc introduces StationPortal I/O system - 05/26/09 StationPortal provides a common Ethernet interface for I/O such as pushbuttons, bar-code scanners, LEDs, and torque guns used in assembly support systems.

		OPTYS releases evaluation board for sensor development - 05/21/09 EVAL UFDC-1/UFDC-1M-16 evaluation board lets users easily access all functions provided by UFDC-1 and UFDC-1M-16 integrated circuits supported by the International Frequency Sensor Association (IFSA).

		Control Microsystems announces SCADAPack 314 - 05/20/09 SCADAPack 314 has 32-bit processing, high-speed serial communication, integrated power supply, advanced power-management, and a wide range of digital and analog I/O. Price: $995

		Matrox Imaging releases 4Sight XB embedded imaging system - 05/17/09 With integrated support for GigE Vision and IEEE-1394b IIDC, the 4Sight XB helps reduce overall system costs by eliminating the need for add-in acquisition boards.

		Measurement Computing introduces USB-QUAD08 8-channel encoder module - 05/17/09 USB-QUAD08 data acquisition device provides simultaneous input and decoding for up to eight incremental quadrature encoders at resolutions up to 48 bits.

		Rockwell Automation releases Logix-XT for extreme environments - 05/14/09 Logix-XT controller, FLEX I/O-XT and communication modules reduce the need for additional heating and cooling equipment.

		HBM announces CANHEADdirect DAQ module - 05/10/09 Each CANHEADdirect takes readings from up to 50 measuring points. Up to 5 amplifiers can be connected to each other for increased coverage.

		Logic Beach adds Modbus to IntelliLogger - 05/06/09 Modbus/RTU Master feature enables data acquisition from Modbus Slave instruments, controls, smart transducers and other Modbus enabled devices.

		Data Translation enhances accuracy of analog instruments - 05/05/09 VOLTpoint and TEMPpoint instruments now incorporate ISO-Channel technology for better accuracy.

		Saelig releases PicoLog multi-channel voltage data loggers - 05/05/09 USB-powered PicoLog 1216 and PicoLog 1012 have 12-bit resolution and up to 1 MS/s sample rate.

		B&R adds IO Link to X20 - 04/23/09 All four channels are IO Link channels, but can also be used as standard inputs or outputs.

		ControlAir announces Type-595XP explosion-proof I/P - 04/23/09 Type-595XP holds agency approvals from FM, CSA and ATEX as intrinsically safe and explosion-proof.

		IntelliCom announces NetBiter Modbus I/O extender modules - 04/21/09 I/O Extender series is a collection of analog and discrete I/O modules with Modbus-RTU protocol communications.

		Measurement Computing releases USB-2404 analog input module - 04/20/09 USB-2404-UI can be used to measure a variety of signal types, such as RTDs, thermocouples, load cells, and other powered sensors.

		Stellar Technology releases AP50XX signal conditioner - 04/14/09 AP50XX can be placed in-line anywhere between the transducer and the data acquisition system. Prices start at $210.

		Measurement Computing releases USB analog input I/O modules - 04/14/09 USB-2416 and USB-2416-4AO are 24-bit, analog input devices for voltage or temperature, with eight digital I/O lines and two counters.

		Acromag announces ES2153 analog input Ethernet I/O module - 04/14/09 ES2153 converts 16 DC current and 16 DC voltage single-ended analog inputs from various transducers and instruments for transmission to an Ethernet-based control network.

		Opto 22 adds wireless to SNAP PAC - 04/14/09 SNAP PAC System family of programmable automation controllers, I/O, and accessories provides both wireless and wired Ethernet networking options.

		UEI introduces PowerDNA Ethernet I/O - 04/09/09 PowerDNA can provide up to 150 analog inputs, 192 analog outputs, 288 digital I/O, 48 counter or quadrature channels, 72 ARINC-429 channels and/or 24 Serial or CAN-bus ports.

		Phoenix Contact introduces MINI analog shunt transducer - 04/08/09 MINI is suitable for converting and isolating mV signals from shunt resistors.

		Unitronics releases XL I/O expansion modules - 04/08/09 XL devices offer up to 32 digital I/O per unit plus 3 analog inputs for maximum I/O capacity and minimized cabinet space.

		Calex announces GX series DC/DC converters - 04/08/09 Up to five GX units may be used in parallel to generate up to 1000 Watts of output power.

		Bourns announces TBU circuit protection for process control equipment - 04/07/09 Transient Blocking Unit (TBU) devices provide secure protection for power surge threats from lightning, technician error and factory floor mishaps.

		FiberGuide releases fiber optic feedthroughs for vacuum systems - 04/06/09 Feedthroughs can be used for any industrial or research application that requires optical interfacing with UHV or high vacuum systems.

		National Instruments introduces C Series embedded I/O modules - 04/05/09 Engineers can plug C Series modules into NI Single-Board RIO devices for high-voltage power monitoring, high-resolution analog input, strain and communications in embedded applications.

		Dataforth adds DIN Rail mount to SensorLex 8B signal conditioners - 04/05/09 The 8BP01 single channel DIN rail mount carrier measures only 2.32” x 3.54” x 0.65”, making it ideal for use in high-density installations.

		Schaefer introduces C/B5800 12kW DC/DC converter - 04/01/09 C/B5800 series includes 12,000 Watt DC/DC converter, AC/DC power supply and battery charging products.

		Beckhoff announces EtherCAT Box I/O for harsh environments - 03/31/09 With the Fieldbus Box family, EtherCAT I/O technology no longer needs to be installed in an electrical cabinet.

		ACCES I/O's Pico-I/O module fits on half a board - 03/31/09 Pico-I/O has 16 digital I/O and 8 form C electromechanical relay outputs, yet occupies just half the area of a PC/104 board.

		Acromag adds Ethernet Analog I/O units - 03/31/09 967EN and 968EN models provide an 8-channel interface for differential analog voltage or current input signals. Prices start at $295.

		National Instruments expands Wireless and Ethernet DAQ - 03/25/09 Modules combine high-voltage digital I/O and IEEE 802.11b/g (Wi-Fi) or Ethernet communication to remotely monitor and control actuators such as pumps, valves and relays.

		National Instruments updates CompactRIO development kit - 03/19/09 cRIO-9951 Module Development Kit (MDK) helps design custom C Series modules for NI CompactRIO and add-on boards for NI Single-Board RIO.

		Beckhoff Bus Terminals measure pressure - 03/17/09 KM37xx pressure measuring terminals record differential and absolute pressures from hoses connected to pressure tanks, pressurized cabins, pneumatic and suction systems.

		Brooks Instrument's B-Series mass flow controller ignores fluctuations - 03/11/09 The insensitive B-Series eliminates the need for costly temperature and pressure control devices and systems.

		Phoenix Contact's GSM/GPRS calls remote machines by cellphone - 03/05/09 GSM/GPRS serial modem provides global access to machines and systems via GSM cellular phone connections.

		Semaphore adds DNP3 security to Kingfisher RTU - 03/05/09 DNP3 authentication ensures that messages arriving at the RTU come from the control center or another legitimate asset in the SCADA system.

		ASI announces XCSA DC to DC Converters - 03/05/09 XCSA converters are available in versions with inputs ranging from 12 to 110Vdc and outputs of 12 and 24 Vdc at 5 to 10 amps.

		Opto 22 adds power monitoring module to SNAP I/O - 03/04/09 SNAP-AIPM-3 measures volts AC RMS and amps AC RMS. The module calculates true power, volt-amps, and power sums for all three phases of power.

		Entertron introduces MAC-PWM serial interface card - 03/02/09 MAC-PWM card can be ordered with either one or two high current PWM outputs up to 5 A, and ASCII and ModBus RTU protocols. Price: from $79.

		Dickson releases Takes-the-Heat temperature data logger - 02/26/09 Takes-the-Heat has watertight, food grade, HACCP and FDA-compliant stainless steel case.

		ADLINK announces 16-bit PXI digitizers - 02/25/09 PXI-9816, PXI-9826, and PXI-9846 digitizers offer sampling rates of 10 MS/s, 20 MS/s, and 40 MS/s, respectively.

		Sundance announces SMT712 PXI Express peripheral module - 02/24/09 The SMT712 integrates two fast 12-bit DACs, 2 banks of 64 bit wide 300MHz DDR2 memory and 8 lanes of 2.5Gbits/s PXI Express.

		Calex announces Model 4720 signal conditioner - 02/23/09 Model 4720 DIN Rail mount, self-contained DC powered module is for load cell, strain gage, or single ended analog amplification and filtering.

		Ethernet Direct announces Data Collection Devices - 02/18/09 Rooster Remote I/O and Canary CAN Bus modules industrial data collection devices are for applications like building and factory automation.

		Calex announces PQ-28 power conditioning module for DC/DC converters - 02/17/09 PQ-28 protects downstream circuitry against transients and over-voltage conditions.

		Weidmuller releases Wave TTA universal signal conditioner - 02/16/09 Wave TTA functions as a signal isolator, transmitter, converter, linearizer and trip amplifier, all in a single unit.

		BEI Industrial Encoders introduces encoder to USB converter - 02/11/09 Converter translates encoder position data to industry standard USB 2.0 format that can be accessed directly through a PC.

		Measurement Computing announces USB-502-LCD temperature/ humidity logger - 02/11/09 USB-502-LCD standalone data logger measures and stores up to 16,379 relative humidity and 16,379 temperature readings. Price: $97.

		Sealevel introduces DIO-32.PCIe digital I/O interface - 02/10/09 DIO-32.PCIe PCI Express digital I/O interface adapter provides 16 optically isolated inputs and 16 Reed relay outputs.

		Rockwell Automation introduces low-power DataSite RTU controller - 02/09/09 DataSite RTU operates in remote locations with extreme temperatures, such as those often found in the oil and gas, and wastewater industries.

		C&K announces LCA Series subminiature snap-acting switches - 02/05/09 LCA Series RoHS-compatible switches are available in SPDT and SPST configurations with solder, quick connect, or PC terminals.

		Dwyer Instruments releases Model HTDL-10 data logger - 02/05/09 Model HTDL-10 can handle being placed in conditions of extreme heat of up to 302°F.

		DSPCon introduces DataFlex-1000A data acquisition system - 02/04/09 DataFlex-1000A portable, high-speed data recorder is compatibile with any commercially-available laptop or PC.

		ACCES I/O releases Model WWP-IIRO-8 wireless I/O - 02/04/09 Model WWP-IIRO-8 consists of a pair of intelligent 16-channel digital I/O units that communicate directly with each other.

		IPS introduces Foxboro I/O modules for migrating aging control systems - 02/02/09 Modules reduce the cost associated with migrating aging control systems to the latest generation of I/A Series distributed control and InFusion enterprise control systems.

		Dataforth introduces 8B33 SCM for measuring True RMS - 01/26/09 8B33 True RMS input module converts an AC input to its True RMS DC value, then filters, isolates, amplifies, and converts it to a standard process voltage or current output.

		Omniflex TFX signal conditioner replaces Bailey Series 3 - 01/21/09 TFX replaces obsolete Bailey 3 Series Stepper Motor Drive modules for valve actuator positioning.

		National Instruments expands machine diagnostic software - 01/19/09 Sound and Vibration Measurement Suite Version 7.0 adds psychoacoustic measurements, making it possible to quickly set up tests to quantify noise, vibration and harshness.

		Crydom introduces RHP hybrid solid state contactors - 01/19/09 RHP line includes 3 phase contactor configurations rated at 120, 240, 280 or 600 VAC at 40 or 50 amp load ratings to replace Mercury Displacement Relays.

		Calex announces 24S24.8TH DC/DC converter - 01/19/09 24S24.8TH has a 4:1 input range of 9 to 36 Volts DC in a 200 Watt industry standard half brick package. Price: $115.50

		Omniflex enhances Teleterm RTU alarm monitor - 01/19/09 On Demand message feature sends SMS messages from a mobile device to the silent sentry to read any of the digital and analog/counter I/O values.

		Saelig introduces EmbedRF Integrated - 01/15/09 EmbedRF Integrated includes hardware and software for integrating an RF design directly into on a board.

		Acromag introduces 48-channel Ethernet I/O modules - 01/15/09 ES2151 and ES2152 interface 16 DC current inputs, 16 voltage inputs, and either 16 current or voltage output signals to Ethernet devices or controllers

		UEI releases DNR-6-1G HalfRACK Ethernet I/O chassis - 01/14/09 HalfRACK's 6 I/O slots provide up to 150 analog inputs, 192 analog outputs, 288 digital I/O, 48 counter or quadrature channels, and 24 Serial or CAN-bus ports.

		Advantech announces 32-channel isolated digital Input/Output modules - 01/14/09 ADAM-5053S and 5057S support high isolation and up to 2,500 VDC to avoid damage from different channels and protect system operation stability.

		Calex releases 8920 thermocouple to analog signal conditioners - 01/13/09 8920-500-DC and the 8921-1250-DC employ linearization and cold junction compensation as well as complete three-way signal isolation.

		SWP miniaturizes frequency-to-digital converters - 12/30/08 UFDC-1 and UFDC-1M-16 are available now in a 0.50 mm Micro Lead Frame package (MLF) for use in digital sensors and transducers.

		IEI announces industrial data collection devices - 12/22/08 Devices include multiport serial communication cards, CAN communication cards, data acquisition cards, and RFID systems.

		ADLINK introduces PCIe-FIW64 embedded frame grabber - 12/18/08 PCIe-FIW64 provides four IEEE 1394b (FireWire 800) ports for multiple IEEE 1394b cameras and supports total data transfer rates up to 3.2 Gbps.

		Beijer Electronics introduces HMI I/O Controller - 12/18/08 I/O module enables easy interfacing with Beijer's H-T40m-P HMI for simple monitoring and automation tasks without the need of a PLC.

		TURCK releases BL20 DeviceNet gateway. - 12/17/08 Up to 32 I/O modules can be connected to the gateway, resulting in a system that can handle up to 512 digital I/O points or 128 analog I/O points on a single gateway.

		Red Lion introduces IAMS signal conditioners - 12/15/08 IAMS can accept RTD, TC, Ohm, potentiometer, mA, VDC and process input signals, allowing the units to be connected to most common sensors.

		NI releases strain and voltage modules for CompactDAQ and CompactRIO - 12/11/08 Products include NI 9225 300 V power measurement module as well as the 9235 and 9236 8-channel strain gage measurement modules.

		GE Fanuc adds BIM Profibus interface to 8000 Process I/O - 12/03/08 Profibus Bus Interface Module (BIM) connects a Profibus-DP master with up to 32 8000 Process I/O modules and allows transfer of HART data.

		Softing announces FFusb USB interface to FOUNDATION Fieldbus - 11/30/08 FFusb interface module provides access to H1 field devices over the USB interface of a desktop or notebook computer.

		Advantech introduces PCM-3202I PCI-104 interface card - 11/24/08 PCM-3202I supports two independent AMONet (Advantech Motion Network) RS-485 master rings with each ring controlling up to 2048 I/O points and 256 axes.

		Control Microsystems announces SCADAWave Ultra JR50 Ethernet data radio - 11/23/08 Via IP over Ethernet, JR50 utilizes portable network access to remote assets such as field-installed controllers and intelligent sensors.

		Calex announces Model 4710 load cell and strain gage signal conditioner - 11/23/08 Model 4710 contains a precision instrumentation amplifier, filtered output and a built-in excitation supply.

		Moore Industries announces miniMOORE signal conditioners - 11/20/08 miniMOORE family of multi-channel analog signal conditioners provides up to four I/O channels in a 1 inch (25.4 mm) footprint.

		Rockwell Automation introduces I/O Wiring conversion system - 11/13/08 Wiring conversion system helps minimize wiring errors and reduce labor costs when migrating to newer programmable automation control systems.

		Acromag announces 6U CompactPCI PMC Carrier Cards - 11/12/08 Carrier Cards offer a simple way to implement I/O and other functions from mezzanine modules when PMC slots are not available on SBC or processor boards.

		HMS Industrial Networks introduces Anybus RemoteCom - 11/11/08 Anybus RemoteCom is equipped with an internal web server for remote access of device data including logged data and trend graphs.

		ORing announces IDS-5600 secure device server - 11/10/08 IDS-5600 secure device server gives conventional RS-232, RS-422 and RS-485 devices instant access to TCP/IP and UDP connectivity.

		Dickson introduces Temperature & Humidity Data Loggers - 11/10/08 Multi-feature digital display temperature & humidity data loggers have push-to-start and push-to-stop functions.

		Banner announces DX99 battery-powered wireless node - 11/04/08 Intrinsically safe wireless DX99 collects analog, digital and temperature information in hazardous areas.

		GE Fanuc announces additions to 8000 Process I/O - 11/03/08 Additions include 8129 Supervised Discrete Input/Output Module, 8132 Universal Analog Input Module, and 8133 Analog Input with HART Module.

		Data Translation announces DT9818 USB DAQ board - 10/30/08 DT9818 for OEMs is aimed at embedded applications and runs completely on USB power.

		ACCES I/O announces 104-QUAD-8 quadrature encoder boards - 10/28/08 104-QUAD-8 quadrature input boards handle up to 4, 6, or 8 channels of encoder inputs.

		OceanServer introduces OS4000-T embedded electronic compass - 10/28/08 OS4000-T Nano Compass has 3-Axis magnetic sensors and mounts on a system board.

		Measurement Computing introduces 14 USB Devices - 10/27/08 Products include analog input and thermocouple measurement devices; simultaneous sampling, multifunction devices; and an eight-channel, simultaneous input quadrature encoder counter.

		Bosch Rexroth adds three Inline I/O modules for PLCs and PACs - 10/27/08 Inline I/O modules for encoder feedback, step and direction control, and pulse width modulation work with any Rexroth scalable PLC or PAC.

		Weidmuller announces ITXPlus loop-powered signal isolator - 10/23/08 ITXPlus can measure, filter and isolate different input parameters, then convert them into an industry standard 4-20mA output.

		MESA introduces 7I65 analog servo interface - 10/20/08 The 7I65 has eight 16 bit DAC channels and eight TTL or differential encoder inputs.

		ASI introduces CR series 10 Amp relay modules - 10/14/08 CR series high density DIN rail mounted multi-channel relays are rated for switching loads of up to 10 Amps at 250 VAC.

		National Instruments introduces I/O modules with onboard processing - 10/13/08 PXI-7853R and PXI-7854R can be programmed with NI LabVIEW FPGA Module to perform custom onboard processing for inline data analysis and deterministic I/O control.

		Advantech introduces OPC Server drivers - 10/12/08 Any software system with OPC client capabilities can access the OPC server drivers.

		Siemens announces I/O modules for S7-200 PLC - 10/08/08 High density, four- and eight-channel modules are available for analog inputs, thermocouples and RTDs.

		Yokogawa releases DXAdvanced R3 DAQ display station - 10/08/08 DXAdvanced R3 is available in two models: DX1000 with 2-12 universal inputs and 5.5” color display; and DX2000 with 4-48 universal inputs and 10.4” color display.

		Opto 22 enhances SNAP I/O for Allen-Bradley - 10/06/08 Free firmware upgrade adds support for EtherNet/IP communications protocol, giving automation engineers remote I/O options for ControlLogix and CompactLogix control systems.

		Mesa introduces 7I64 isolated I/O Card - 10/01/08 The 7I64 is an 24 output, 24 input isolated I/O card, allowing high side, low side, push-pull and other output switch configurations.

		Moore Industries announces microNCS Distributed I/O - 10/01/08 The microNCS provides MODBUS RTU master capabilities, distributed data acquisition and control capabilities.

		Calex introduces Model 4800 load cell summing transmitter - 09/29/08 Model 4800 accepts both AC & DC power inputs, powers up to four load cells, provides three way isolation, and has four output options.

		Omniflex announces OMNILOG2 data logger for ABB Magmaster flowmeters - 09/26/08 TELETERM OMNILOG2 communicates directly with the Magmaster transmitter and uploads the flows, totals, alarms, and diagnostics and stores the values on two log files.

		Semaphore adds 1-Wire Interface to T-BOX SCADA - 09/25/08 1-Wire is a half duplex communications network that uses a single wire to provide data transmission and power.

		Data Translation announces DT9812-10V-OEM USB DAQ board - 09/22/08 OEM version provides two, 20-pin connectors to accommodate all I/O signals without an enclosure, allowing an OEM to embed the board into its own system.

		Audon announces RedLab-1608FS USB DAQ unit - 09/19/08 RedLab-1608FS 8 channel, 16-bit data acquisition unit provides simultaneous sampling on all input channels.

		GE Fanuc introduces I/O module for VersaMax Micro - 09/15/08 VersaMax Micro Thermocouple expansion module can be used for temperature monitoring and controlling, as well as weighing applications.

		Korenix releases JetCon 6330 Ethernet I/O converter - 09/15/08 JetCon 6330 smart I/O to Ethernet converter has 16 channels of digital input.

		Beckhoff Automation releases fiber-optic EtherCAT I/O - 09/11/08 EK1501 EtherCAT Coupler and EK1521 junction terminal allow extremely long distance networking up to 1.24 miles.

		Calex releases 8900 Series signal conditioners - 09/09/08 The 8900 Series DC powered signal conditioners are available with 8 different inputs: 0-50mV, 0-100mV, 0-5V, 0-10V, 0-100V, 4-20mA, 0-20mA, and 0-50mA.

		Lanner introduces VC-8016 PCI-E Video Capture Card - 09/09/08 VC-8016 card supports 16 channel audio and 16 channel audio inputs, enabling the construction of a scalable digital video surveillance system with high resolution and low bandwidth.

		Pepperl+Fuchs introduces CorrTran corrosion data logging system - 09/05/08 CorrTran allows users to access real-time corrosion data via Ethernet, USB, SD card, or locally via videographic chart recorder.

		Audon introduces RedLab-TC USB Thermocouple DAQ device - 09/02/08 The RedLab-TC provides eight temperature inputs, 8 bits of digital I/O, 500 V of isolation, and built-in ambient temperature sensing, for only $239.

		Measurement Computing introduces PCI Express digital I/O boards - 08/26/08 PCIe-DIO24 and PCIe-DIO96H ship with TracerDAQ data logging, viewing, and analysis software.

		Omega releases Model OM-CP-TC110-2MB thermocouple data logger - 08/25/08 Model OM-CP-TC110-2MB has a wide temperature range and accepts thermocouple types J, K, T, E, R, S, B, and N.

		Pepperl+Fuchs introduces VBA-4E4A AS-Interface Junction Box - 08/25/08 VBA-4E4A modules support up to 62 nodes per network. All I/O is powered by the AS-Interface module, eliminating the need for additional sources of power.

		Omega introduces OM-CP-IRTC110 infrared thermocouple data logger - 08/19/08 Miniature OM-CP-IRTC110 data logger works with Omega's OS36 series infrared thermocouples.

		GE Fanuc announces DSC-2300 signal conditioning system - 08/14/08 The programmable DSC-2300 is housed in a compact 3U, 16-slot rack-mountable chassis.

		Acromag introduces EtherStax high-speed analog input units - 08/14/08 ES2161 and ES2162 accept 32 differential DC current or voltage inputs, respectively, and interface the signals to Ethernet devices or controllers.

		UEI releases DNx-AI-254 LVDT/RVDT interface boards - 08/14/08 DNx-AI-254 LVDT/RVDT interface boards are available in for use with UEI's PowerDNA Cube or for rack-mounting in a PowerDNR RACKtangle chassis.

		ASI announces IMRL relay interface modules - 08/12/08 IMRL relay interface modules are available in 1, 2 and 4 pole versions with each carrying a maximum load of 10 Amps.

		Aaxeon releases PCI Express serial cards - 08/08/08 PCIe cards provide instant COM port expansion via PCI Express Bus for PCs, thin clients or servers.

		Brilliant and NovAtel to develop GNSS timing products - 08/08/08 The companies will collaborate to build timing, synchronization and positioning solutions for OEMs in the telecom, industrial and scientific instrumentation market.

		TURCK introduces IMS signal conditioners - 08/07/08 IMS module conditions and isolates signals from external sources, making it a particularly effective where electrical noise is commonplace.

		BEI introduces Motor Encoder Assembly for fine positioning - 08/06/08 Assembly is suitable for machine applications where high acceleration point-to-point motion is required.

		PSI releases Tracopower TEN30WIN DC/DC converters - 08/06/08 TEN30WIN 30W wide input DC/DC converters are packaged in a 2 x 1-in. shielded metal package with an industry standard pin configuration. Price: $39.50.

		National Instruments introduces single-board RIO platform - 08/05/08 Eight sbRIO-96xx devices combine an embedded real-time processor, reconfigurable FPGA, and analog and digital I/O on a single printed circuit board for embedded applications.

		National Instruments announces Wi-Fi and Ethernet DAQ devices - 08/05/08 Wireless and Ethernet DAQ devices include built-in signal conditioning and direct sensor connectivity for electrical, physical, mechanical and acoustic signals.

		GE Fanuc announces RTD and thermocouple input modules for PACs - 08/04/08 Isolated thermocouple analog input modules and the isolated RTD module work with PACSystems RX3i.

		HEIDENHAIN introduces ND 200 Series Digital Readouts for gauging - 08/03/08 ND 200 Series hosts multiple inputs and is suitable for absolute length gauges.

		Data Translation introduces entry-level TEMPpoint temperature system - 08/01/08 Eight-channel entry level version can be extended to 16, 24, 32, 40, or 48 channels over time. Prices start at $2,995.

		ACCES I/O releases USB-DIO-16H digital I/O module - 08/01/08 USB-DIO-16H has 16 high-speed buffered digital inputs or digital outputs at continuous, sustained streaming speeds up to 16 MB/s for fast, unlimited waveform length.

		Rockwell Automation expands Logix family for users and machine builders - 08/01/08 Enhancements include Stratix, advanced process control and safety functionality, and three new Logix programmable automation controllers (PACs).

		Semaphore adds MS-6RTD Interface to T-BOX SCADA system - 08/01/08 MS-6RTD interface module accommodates two-wire and three-wire RTD temperature sensors.

		Beckhoff releases EL3602 EtherCAT Terminal - 07/30/08 EL3602 samples measurements with a 24 bit resolution and accuracy within ±0.01 percent, suitable for high-precision measurement requirements.

		Control Microsystems announces 5414 and 5415 Digital I/O - 07/24/08 Both the 5414 and 5415 are designed as ultra compact modules occupying only 2.9 inches on a DIN rail installation.

		Beckhoff announces EtherCAT XFC I/O terminals - 07/24/08 EtherCAT Terminals for eXtreme Fast Control (XFC) have time stamping that latches the exact system time at which edge changes occur.

		B&R gains TÜV Certificate for its safety products - 07/24/08 SafeDESIGNER, SafeLOGIC, X20 SafeIO and Ethernet POWERLINK Safety fulfill ISO 13849 (PL e) IEC 62061 (SIL 3) and IEC 61508 (SIL 3) standards.

		US Digital announces USB4 data acquisition device for encoders - 07/23/08 USB4 data acquisition device records data from four incremental encoders, eight digital inputs and four analog input channels.

		CAS DataLogger announces dataTaker geotechnical data loggers - 07/22/08 DT80G and DT85G are expandable up to 300 channels and are compatible with all major brands of geotechnical sensors.

		Software Toolbox upgrades OmniServer 2.6 - 07/22/08 Version 2.6 OPC and I/O Server adds support for Windows Vista and Server 2008, along with the ability to generate alarm notifications via email.

		SoftSwitching Technologies expands grid alert service - 07/22/08 Made up of thousands of I-Sense voltage sag detectors, I-Grid reports to a centralized server which tracks Dirty Power in real time. Now, notifications are delivered via email, pager or mobile phone.

		Connect One introduces iChip CO2144 IP controller - 07/22/08 This miniature package supports wireless LAN and all cellular standards, making it ideal for applications such as remote monitoring devices.

		WebDock updates DataPort Data Collection for RSLinx - 07/18/08 Enhancements to DataPort 2008.14 include graphing from the main program, email abilities and bug fixes.

		Saelig releases EL-2-12BIT datalogger - 07/11/08 EL-2-12BIT display and logger module is capable of measuring, recording and displaying temperature, voltage or current.

		austriamicrosystems releases H35 High-Voltage IO with ESD protection - 07/10/08 The H35 periphery library guarantees a 4kV HBM (Human Body Model) ESD protection compliant to the MIL-883E, Method 3015.7 and JEDEC JESD22-A114B ESD standards.

		Emerson introduces VerticalPlus I/O for DeltaV Systems - 07/09/08 VerticalPlus I/O carriers provide flexible installation, increased I/O density, and better thermal management for both DeltaV and DeltaV SIS applications.

		ASI announces IMHD D-Sub Connector interface module - 07/01/08 The transition from a high density D-Subminiature to individual wires is simplified with IMHD interface module.

		Contemporary Controls Introduces BAS Remote Expansion Module - 07/01/08 The BASR-8M can be expanded to a total of 32 Universal I/O points and 8 relay contacts to suit any building automation installation.

		Dataforth announces 8B42 2-wire transmitter interface modules - 07/01/08 8B42 module supplies power to a transmitter, then isolates, filters, and amplifies the process current input signal and provides an analog voltage output.

		Opto 22 introduces SNAP TEX wiring accessories - 06/30/08 SNAP TEX mounting and wiring accessories include terminal extender cables, breakout boards, wiring harnesses, and other components for mounting and wiring automation, control and I/O systems.

		Control Microsystems announces SCADAPack 300 USB storage device - 06/27/08 Using removable USB storage such as Flash memory sticks, SCADAPack 300-Series controllers can log to internal memory or external mass storage devices.

		Matrox introduces M-Series graphics cards to drive up to four monitors - 06/26/08 M-Series quad-capable display cards offer 512MB of memory and support for independent or stretched mode on up to four monitors simultaneously.

		Power Sources Unlimited announces TES-2M DC/DC Converter - 06/24/08 TES-2M Series 2 Watt, high isolation, DC/DC converters are packaged in an ultra compact, surface mount package measuring only 0.54 x 0.94 x 0.30 in.

		UEI releases AI-225 vibration sensor interface board - 06/19/08 AI-225 allows direct connection to industry-standard 2-wire vibration sensors and provides both software and LED annunciation of open or shorted sensors.

		GE Sensing introduces PACE 5000 pneumatic pressure controller/indicator - 06/17/08 For 19-inch rack systems or as a bench top instrument, PACE 5000 is suitable for integration into automated processes, where fast and accurate pressure control is required.

		Acromag announces AcPC4610 PMC carrier cards for CompactPCI - 06/16/08 3U Carrier Cards offer a simple way to implement I/O and other functions from mezzanine modules when PMC slots are not available on SBC or processor boards.

		Pepperl+Fuchs introduces Safety at Work Emergency Stop switches - 06/15/08 Field and panel-mount models are available in high intensity, wide angle illuminated versions, as well as non-illuminated versions.

		Softing releases BC-230-PB PROFIBUS PA diagnostic monitor - 06/15/08 BC-230-PB analyzes the operation of a live PROFIBUS PA segment without interfering with its operation.

		Weidmuller introduces MANN series configurable signal conditioners - 06/09/08 Series includes signal isolators and transmitters, process alarms, multi-channel processing modules, indicators and configurable displays, counters/totalizers and calibration devices.

		AutomationDirect releases F2-16TDxP DC Output Modules - 06/05/08 F2-16TDxP 16-channel current output modules for DL205 PLCs are priced at $119.

		Omniflex enhances Omni16C Alarm Annunciator - 06/05/08 Enhancements include programmable time delays on input, making it suited for monitoring an incoming stream of pulses from any source, such as flow or rotating machinery.

		ACCES I/O releases Model USB-IDIO-16 I/O module - 05/21/08 USB-IDIO-16 is fully compatible with both USB 1.1 and USB 2.0 ports and offers hotplug functionality

		Phidgets enhances 1018 PhidgetInterfaceKit - 05/21/08 1018 PhidgetInterfaceKit 8/8/8 now has a digital input hardware filter that eliminates false triggering from electrical noise.

		Aaxeon releases APN-200 wireless LAN access point - 05/21/08 The APN-200 can be configured to operate as an Access Point, Bridge or Repeater.

		Advantech enhances ADAM-6000 Modules - 05/15/08 Enhancements include Ethernet I/O modules which add advanced Peer-to-Peer (P2P) and Graphic Condition Logic (GCL) functionality.

		PCB releases 410B01 force sensor signal conditioner - 05/14/08 Model 410B01 helps older PLC systems by capturing and holding the peak force reading until the PLC is able to scan for the value.

		TandD releases TR-57U handheld data collector - 05/14/08 TR-57U Data Shuttle has the capacity to collect up to 256,000 readings from 16 TandD Data Loggers.

		Carlo Gavazzi releases RJ1P analog-controlled relay - 05/13/08 RJ1P is capable of switching single phase 230, 480 or 600 Vac loads up to 50 Aac with 5 different operating modes when controlled by 0-10 Vdc or 4-20mA signals.

		Audon announces USB-AD16F high speed DAQ - 05/12/08 USB-AD16F I/O unit has 16 analog inputs, 2 analog outputs, 4 digital inputs, and 4 digital outputs. Data can be acquired at 250kHz.

		Measurement Computing announces USB-1616HS-BNC DAQ device - 05/11/08 USB-1616HS-BNC USB data acquisition device has 16 analog inputs, counter input, quadrature encoder input, and digital I/O.

		UEI releases Guardian 32-channel digital output boards - 05/07/08 DNA models are for use with UEI's Ethernet Cube family;DNR models are for the 12-slot rack-mounted RACKtangle I/O chassis.

		Semaphore introduces T-BOX LT-100 SCADA System - 05/07/08 The LT-100 model is cost effective for installations which require up to 8 DI/DO points and 2 counter inputs.

		Siemens introduces SIMATIC SM 336 SIL 3 analog input module - 05/07/08 SIMATIC SM 336 works with ET 200M I/O and PCS 7F process safety systems and supports single, dual and triple redundancy architectures.

		National Instruments announces two USB-631x I/O devices - 05/05/08 USB-6212 and USB-6216 have a 60 percent improvement in analog sampling rates, sixteen 400 kS/s analog inputs, and two 250 kS/s analog outputs.

		Omron announces CJ1W-PH41U Analog Input Module for PLCs - 05/01/08 CJ1W-PH41U four-point PLC analog input module has temperature resolution to 0.001 degree Celsius.

		National Instruments releases four PXI I/O modules - 04/29/08 PXI-7841R, -7842R, -7851R and -7852R modules have eight analog inputs, eight analog outputs, 96 digital I/O lines, and Xilinx FPGAs.

		PCB introduces Model 478A30 signal conditioner for accelerometers - 04/13/08 Model 478A30 is compatible with Series 3991/3993 high amplitude 20,000g MEMS DC response shock accelerometers.

		Acromag announces PMC-VSX I/O modules - 04/09/08 PMC-VSX modules have a DSP-optimized Xilinx Virtex-5 FPGA that is reconfigurable for high-performance I/O processing and user-developed algorithmic computation.

		Advantech releases ADAM Analog Input Modules - 03/26/08 ADAM-5017P and ADAM-5018P have a High Common Mode function, over-voltage protection, and built-in TVS/ESD protection.

		UEI releases 48-bit Digital Input Board - 03/26/08 The DNA-DIO-448 and DNR-DIO-448 are compatible with UEI’s “Cube” and RACKtangle I/O chassis respectively.

		Data Translation announces DT9837A USB module for vibration testing - 03/18/08 DT9837A has four independent 24-bit piezoelectric sensor inputs that are synchronized with a tachometer input to provide data streams matched in time for field or laboratory use.

		NI announces M Series USB DAQ devices with 18-bit accuracy - 03/18/08 USB-6281 and USB-6289 have an 18-bit ADC, which provides a 4X increase in resolution over traditional 16-bit devices.

		National Instruments Expands C Series data loggers - 03/18/08 The NI USB-9219, USB-9229 and USB-9239 modules provide USB, bus-powered connectivity to the C Series for data-logging applications.

		SIXNET announces EtherTRAK-2 Fault-tolerant I/O - 03/18/08 EtherTRAK-2 has dual Ethernet ports. Each port has MAC and IP addresses allowing two module connections to independent networks providing more configurations and flexibility.

		Pentek introduces 7150 200 MHz A/D Converter - 03/11/08 7150 High Speed Data Converter has four 200 MHz 16-bit A/Ds and a pair of high-performance Xilinx Virtex-5 FPGAs.

		Audon Electronics introduces USB-AD DAQ unit - 03/06/08 So small it could be mistaken for a connector, USB-AD has 16 analog inputs, 1 analog output, 4 digital inputs and 4 digital outputs, all enclosed in a standard D-type connector housing.

		ASI introduces High Density Signal Conditioners - 03/04/08 The new line includes analog converters and isolators, RTD and thermocouple converters, analog to frequency signal converters and threshold modules.

		Matrikon launches Mobile Equipment Monitor for mining - 03/04/08 Mobile Equipment Monitor remotely collects all available operating data such as temperature, pressure and alarms from onboard systems and transmits the data to a central database.

		ACCES I/O releases USB-AI analog input modules - 02/27/08 USB-AI Series boards have eight standard analog voltage input ranges, two factory current input ranges, and prices ranging from $339 to $639.

		Agilent Technologies adds options to Acqiris Digitizers - 02/20/08 Options include U1071A-002 model with up to 2 GS/s sampling rates and U1071A-SAR with simultaneous acquisition and readout.

		Phoenix Contact announces ETD Electronic Timer Relays - 02/20/08 ETDs offer timing settings from milliseconds through several days, and functions such as star/delta (or Wye/Delta) and watchdog.

		Rockwell Automation announces SensaGuard safety switches - 02/19/08 RFID-coded, non-contact safety switch helps reduce machine and wiring costs, boasts Cat. 4/SIL 3 rating, and offers extended diagnostics for easier troubleshooting

		Acromag announces PMC I/O modules with FPGAs - 02/19/08 PMC I/O modules have a Virtex-5 FPGA for fast processing of custom logic routines, large banks of high-speed memory, and PCI interface.

		Yokogawa announces I/O for Turbomachinery Control - 02/06/08 Installed on a CENTUM VP field control station, the new IO modules provide high-speed control and protection of turbomachinery.

		UEI releases UEISIM series I/O Cube - 02/05/08 UEISIM is an ideal solution for Simulink users who need to test their simulations on real hardware.

		Mitsubishi introduces e-F@ctory Solution - 02/05/08 e-F@ctory combines control hardware and networks with enterprise IT systems offered by strategic partner companies, including IBM and ILST.

		Softing releases CAN-bus PC/104 Board for OEMs - 01/30/08 Interface boards are offered as single or dual channel versions with or without galvanic isolation.

		Phoenix Contact introduces RAD-80211-XD-BUS Wireless Ethernet Radio - 01/29/08 RAD-80211 series combines secure wireless communication with control of up to eight I/O modules. Up to 64 I/O can be interfaced directly to the radio.

		TandD introduces S Family data loggerrs - 01/21/08 Loggers measure and record temperature in normal outdoor conditions as well as harsher frozen environments, frozen storage and high humidity situations.

		Moore Industries' NCS I/O System Acquires cFMus Approvals - 01/14/08 The rugged I/O system can be used in Class I, Division 2, Groups A, B, C & D Hazardous areas in both the U.S. and Canada. This allows the NCS to be used in locations where explosive gases and liquids may be present.

		Softing adds PROFINET IO stacks for Siemens ERTEC - 01/06/08 Protocol stack software for PROFINET IO is available as “Controller” and “Supervisor.” The software supports Conformance Class A and B.

		Endevco announces model 4999 Multi-Channel Signal Conditioner - 01/04/08 Model 4999 has individual input ground isolation to eliminate ground loops often encountered with multiple channel measurements.

		MESA releases 7I43 FPGA I/O card - 12/28/07 The 7I43 uses a Xilinx Spartan3 FPGA for all logic. The FPGA is downloadable from the USB or Parallel port bus, or via local configuration.

		MESA releases 5I23 I/O card for the PCI bus - 12/20/07 MESA 5I23 uses a FPGA for all logic. The FPGA configuration is downloadable from the PCI bus, allowing creation of almost any kind of specialized I/O function.

		Emerson introduces Ovation SCADA for Wind Energy - 12/20/07 The Ovation SCADA system features monitoring, control and diagnostic functionality that optimizes wind farm operations.

		Cooper introduces Cybectec SMP I/O for substations - 12/19/07 SMP I/O for utility plants and facilities reduces the amount of wiring required, as well as configuration and commissioning time.

		TURCK introduces BL programmable I/O gateways - 12/19/07 The programmable gateways may be used to control a variety of I/O including digital, analog, serial and RFID.

		Rockwell introduces CompactBlock Guard Ethernet I/O - 12/17/07 CompactBlock Guard I/O on EtherNet/IP safety I/O module detects failures at the I/O and field-device level. It works with safety PLCs.

		Advantech introduces PCI-1715U Isolated Analog Input Card - 12/13/07 With isolated circuits, the PCI-1715U protects sensitive measurement circuitry from interference currents or voltages.

		Imsys announces IM3910 RSoC MCU for I/O demanding and power sensitive devices - 12/06/07 The combination with Java makes it useful for applications such as automation networking, battery powered devices, Internet connected equipment, and Java enabled remote control, point of purchase systems and facility management.

		UEI announces DNR-12-1G Ethernet I/O Chassis - 12/04/07 The RACKtangle’s 12 I/O slots provide up to: 300 analog inputs, 384 analog outputs, 576 digital I/O, 96 counter or quadrature channels, 144 ARINC-429 channels and/or 48 Serial or CAN-bus ports.

		Acromag releases Model 989EN Ethernet I/O modules - 12/01/07 These inch-wide modules provide an isolated Ethernet Modbus TCI/IP interface for any input/output mix of up to 16 discrete signals.

		TandD introduces RTR-52Pt Wireless Data Logger - 11/24/07 RTR-52Pt uses industry standard three wire Pt-100 RTD sensors.

		NI and QNX offer analog I/O evaluation kit to OEMs - 11/12/07 The kit has a NI USB DAQ device, single-board computer, and evaluation versions of the QNX Momentics suite and NI's LabVIEW Software Development Kit.

		MTL announces 4500 Series Intrinsically Safe Isolators - 11/08/07 The product line incorporates over two dozen intrinsically safe isolators for analog and digital inputs and outputs.

		MCC introduces Web-enabled temperature DAQ - 11/06/07 WEB-TEMP and WEB-TC are Ethernet compatible with built-in Web servers that write temperature data to a Web page.

		ITI releases wireless mesh SCADA system - 11/05/07 SCADAMESH supports analog and digital I/O, has an integral PLC on a chip as well as a programmable processor and memory. Power is battery or line powered.

		ADLINK introduces PCIe-RTV24 Video Capture Card - 11/01/07 Based on the PCI Express bus, PCIe-RTV24 offers bandwidth required by machine vision applications.

		Audon announces Modbus I/O Units - 10/25/07 Models available accept voltage, current, thermocouple and PT-100 inputs, and provide voltage and current outputs and digital and relay I/O.

		HEIDENHAIN speeds up EnDat 2.2 encoder interface - 10/24/07 Bidirectional EnDat 2.2 is now available with a clock frequency of 16 MHz for high-response applications with direct drives.

		Opto 22 releases 8-Channel Analog Input Modules - 10/23/07 For use with SNAP PAC System, these higher-density modules connect to temperature, pressure, flow, level, and other analog sources.

		TandD introduces TR-73U Data Logger - 10/19/07 TR-73U monitors three channels for temperature, humidity, and barometric pressure.

		UEI announces DNA-AO-332 Analog Output Board - 10/17/07 The board provides 32 channels of 16-bit resolution analog output with a ±10 Volt output range.

		Audon announces UDIN USB Relays and I/O - 10/11/07 Relays consists of a USB interface, a micro-controller, relay outputs and/or opto-isolator inputs. The units are controlled by simple ASCII commands.

		Sealevel releases SeaDAC Lite 8126 digital I/O - 10/10/07 Powered by the USB bus, the SeaDAC Lite 8126 addresses 32 channels of I/O as four eight-bit ports, each programmable as input or output.

		DSPCon launches DataFlex-500 Data Recorder - 10/10/07 DataFlex-500 portable, high-speed data recorder provides real-time playback, display and analysis, and recording speeds up to 256,000 samples/sec.

		Semaphore introduces Kingfisher and T-BOX Telemetry - 10/09/07 Kingfisher and T-BOX IP-based telemetry enable the complete integration of SCADA, control, and communications functionality in one rugged package.

		TURCK releases analog input station for DeviceNet - 10/07/07 Analog input station with IP 67, 68 and 69K ratings supports four analog inputs on the DeviceNet network.

		AMCI announces 5274 inspection module For ControlLogix - 10/02/07 5274 takes analog samples at known points and compares these measured values to a profile to determine if a tested part passed or failed.

		ADLINK announces HSL I/O slave modules - 09/27/07 High Speed Link (HSL) U Series distributed digital input/output slave modules are priced at $140.

		Siemens introduces ASIsafe modules for light curtains - 09/21/07 The K45F 2F-DI LS (light sensor) module lets electronic safety sensors with testing semiconductor outputs be integrated into AS-Interface networks.

		Audon announces low-cost U120816 USB DAQ - 09/20/07 The U120816 provides eight analog inputs, 16 digital I/O, two programmable pulse-width output channels, and one 16-bit counter. Price: £79.

		Audon announces Poseidon 3266 monitor that sends email Alarms - 09/12/07 Poseidon 3268 is an Ethernet based device which can send an email alarm when up to 4 monitored temperature or humidity sensors exceed their defined range.

		Sealevel adds wireless to SeaI/O DAQ systems - 09/12/07 The SeaI/O W-series is compatible with industry standards, communicating over 802.11b/g wireless networks using WEP, WPA-TKIP and WPA2-AES encryption standards.

		TURCK annouinces DeviceNet Drive Interface station - 08/30/07 The Drive Interface station is for use where up to four stand-alone adjustable frequency drives need to be interfaced onto a DeviceNet network.

		Measurement Computing announces USB-1616 DAQ modules - 08/22/07 The USB-1616HS, the USB-1616HS-2, and the USB-1616HS-4 provide synchronous analog, digital, and frequency I/O in one compact package.

		Beckhoff introduces IL230x-B905 EtherNet/IP I/O Modules - 08/16/07 Rugged IP67 EtherNet/IP modules are for direct mounting in demanding environments.

		TURCK expands DeviceNet I/O stations - 08/15/07 FDN20 high density I/O stations support up to 32 inputs or 16 dedicated inputs and 16 input/outputs on a DeviceNet network.

		NI introduces Sound and Vibration DAQ modules - 08/06/07 PXI-4498 and PXI-4496 dynamic signal acquisition modules offer 16 analog inputs per module., sampling rate of 204.8 kS/s per channel, and TEDS smart sensor support.

		B&B Electronics releases Zlinx wireless I/O - 07/31/07 Zlinx wireless I/O maps directly into a Modbus table, making it an easy fit to any PLC, HMI or PC based control system. Price €250.

		ASI develops custom Bus I/O Modules - 07/24/07 ASI can develop an I/O module that will interface to any industrial bus system.

		Measurement Computing announces USB temperature modules - 07/23/07 USB-TC-AI and USB-TEMP-AI have four differential temperature inputs, and four differential or single-ended voltage inputs with programmable gain.

		IXXAT introduces CAN-CR210/FO fiber optic repeater - 07/20/07 Fiber optic repeater transmits CAN messages in an environment with high electromagnetically influences.

		Calex announces LT Series DC/DC converters - 07/19/07 LT triple output converters provide three fully independent and precisely regulated output voltages in a single compact package.

		Power Sources releases TEN-8WI DC/DC converters - 07/17/07 Typical applications are industrial electronics, telecommunications, instrumentation, or wherever PCB space is critical. Prices start at $19.

		Wago introduces JUMPFLEX signal conditioning modules - 07/17/07 857 Series signal conditioner modules support current, voltage, Hart protocol, RTDs and thermocouples. Configurable and dedicated modules are available.

		Foxboro announces I/A Series migration modules for TDC 2000 users - 07/16/07 I/A Series migration modules are an exact physical replacement for existing TDC 2000 input/output (I/O) modules.

		Kurt announces USB Data Collection & Control Module - 07/16/07 KurtUSB MLX can provide programmable responses for automatic operation, making it suited for stepper motor, gaging systems, automation and PLC applications.

		Red Lion Controls announces CSOUT analog output module - 07/11/07 CSOUT modules have four isolated, fully scalable outputs that are software configured.

		Banner introduces SureCross wireless sensor network - 07/09/07 SureCross consists of a Gateway controller and remotely located Nodes that bring monitoring and control capabilities to connected I/O.

		Computer Aided Solutions introduces DT85 data logger - 07/02/07 DT85 data logger has up to 48 inputs, USB memory stick data storage, and a built-in web server.

		Danaher Motion introduces SQIO SynqNet I/O Modules - 06/29/07 SQIO provides real-time I/O and remote motion performance diagnostics via SynqNet for system level visibility, analysis, and control.

		Beckhoff gets North American approval for TwinSAFE Safety I/O - 06/27/07 Having received all necessary approvals for industrial use in the United States and Canada, TwinSAFE safety I/O is now available in North America.

		AD releases Meriam/ADALET Wireless Pressure Switch - 06/26/07 The switch is suitable for pressure measurement applications such as tank levels, power generation, process control, flow monitoring and pipelines.

		Pentek introduces Model 6890 VME I/O synchronizer board - 06/25/07 Configured as a 6U VME board, Model 6890 synchronizes up to eight VME I/O modules, each receiving a common clock up to 2.2 GHz along with timing signals for synchronizing, triggering and gating functions.

		Graphtec announces GL800 midi data Logger - 06/21/07 GL800 multi-function data logger comes standard with 20 input channels and can be expanded to as many as 200.

		UEI expands UEILogger network support - 06/19/07 UEILogger series can now log CAN and ARINC-429 bus data as well as RS-232, 422 and 485 ports.

		AutomationDirect releases analog modules for DirectLOGIC PLCs - 06/17/07 New modules include 16-bit high-resolution analog modules designed for the DL05 and DL06 PLCs.

		Calex releases HEW Series DC/DC converters - 06/15/07 150W HEW Series has a 4:1 input range to accomodate 12, 24, and 48V input voltage requirements

		Mosaic Industries expands Wildcard digital I/O - 06/14/07 Mosaic added 2 x 2.5 in. stackable digital I/O modules to interface to both low or high voltage peripherals.

		ACCES I/O announces LVDT-8A LVDT signal conditioner - 06/13/07 LVDT-8A provides eight channels of signal conditioning on one board at a price per channel of under $100.

		ASI announces high density signal isolators - 06/13/07 DIN rail mounted line includes analog converters and isolator modules for most of the industry standard analog signals.

		Bosch Rexroth releases SERCOS III Block I/O - 06/13/07 Block I/O enables connection of sensors and actuators to a control system through the SERCOS III bus.

		Agilent introduces DP1400 high-speed digitizer - 06/13/07 The dual-channel DP1400 has an analog front-end with signal conditioning and A/D components and speed of 1 GS/sec on each channel.

		Advantech launches PCI-1763UP digital I/O card - 06/06/07 PCI-1763UP has eight isolated digital inputs and eight relay actuators for on/off control devices or small power switches. Prices start at $245.

		Agilent introduces 82351A GPIB Interface Card - 06/06/07 The 82351A PCIe-GPIB half-height interface card harnesses the fast data transfer rate of PCI Express to support high-bandwidth PC applications.

		Siemens upgrades Sicomp IMC industrial microcomputer - 06/01/07 Enhancements include compact and flexible digital and analog I/O expansion modules for centralized I/O tasks.

		OmniSales introduces OS-Link solar panel monitor - 05/30/07 OS-Link allows remote performance monitoring, via cellular or wireless technology, of the OS24-PS Solar Power Supply.

		ASI releases CWRE pluggable 6 amp relay - 05/29/07 Available in four different models, the CWRE 6.2mm wide, pluggable 6 amp relay mounts on a DIN rail.

		Amphenol announces industrial USB key - 05/29/07 Sealed (IP67) USB key is shock and vibration resistant and comes in a metal casing.

		Mosaic introduces 24/7 DAQ Wildcard - 05/24/07 24/7 Data Acquisition Wildcard accepts low level signals directly from transducers, amplifies and conditions them, and converts them with 24 bits of resolution with no missing codes.

		NI announces PXIe PXI Express high-speed instruments - 05/21/07 Instruments include the PXIe-5122 100 MS/s 100 MHz dual-channel digitizer, and PXIe-6537 and -6536 50 MHz and 25 MHz 32-channel digital I/O modules.

		PSU announces Tracopower THB3 DC/DC converters - 05/16/07 Tracopower THB3 Series of 24-pin DIP dc/dc converters are for applications where high isolation is required.

		TURCK AIM I/O and JBBS junction boxes rated IP 69K - 05/15/07 Testing proved that AIM and JBBS junction boxes can withstand hot steam jet cleaning per EN 60529 and DIN 40050-9.

		Acromag extends EtherStax Ethernet I/O blocks - 05/15/07 EtherStax I/O now has high density channel-isolated discrete I/O with redundant communication and power for use in critical applications and harsh environments.

		WAGO announces Model 750 Analog I/O modules - 05/15/07 Models 750-553 and 750-555 4-channel I/O modules transmit analog signals with standard values of 0-20mA and 4-20mA, respectively.

		Dataforth enhances SCM5B48 accelerometer input module - 05/11/07 The module provides a constant current excitation to the sensor, then isolates, filters, and amplifies the sensor output into a high-level analog voltage.

		SERCOS offers free Easy-I/O Single-Chip Controller - 05/03/07 Easy-I/O software for FPGA chips allows SERCOS III to be integrated into basic I/O slave devices with minimal development and integration effort.

		Elobau introduces heavy-duty joysticks - 04/30/07 J4/J5 joysticks for heavy-duty use are available in analog, digital, PWM and CANbus output versions. All resist EMC interference.

		Moore Industries bakes and boils NCS DAQ for two years - 04/24/07 The NCS has been running since February 2005 in an environmental chamber at temperatures up to 221°F to prove it will work in Middle Eastern applications.

		Murrelektronik introduces Cube67 distributed I/O - 04/23/07 Cube67 distributed I/O modules are available with digital, analog and serial signals. Each digital channel can be user-configurable for input or output operations.

		Weidmuller releases RIDERSERIES II Industrial Relays - 04/23/07 RIDERSERIES II relays include base sockets and industrial relays that can switch loads up to 16A at 24VDC or 230VAC for power or signal switching.

		RTP announces Model 8714 intelligent counter - 04/19/07 Model 8714 has eight high-speed inputs and eight digital outputs. Inputs can be independently configured as pulse counters, quadrature counters to measure position, or for frequency measurement.

		Ethernet Direct introduces Modbus Gateways and DAQ modules - 04/19/07 RUM series Modbus gateway provides communication between Ethernet and serial Modbus devices. Five DAQ modules support Modbus.

		Mosaic adds signal conditioning to Wildcard - 04/11/07 Mosaic added signal conditioning to its 2 x2.5 in. Wildcard embedded controllers, providing interfaces to analog sensors and actuators. Two mezzanine boards offer 4 channels of 4-20 mA inputs, 4 channels of 4-20 mA outputs, and 4 channels of 0-10V I/O.

		UEI adds GPS to DNA, UEIL and UEIPAC data loggers - 04/11/07 DNA-GPS GPS receiver system adds GPS technology to PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time. Price is $495.

		SICK STEGMANN makes DRS26 Encoders programmable - 04/10/07 DRS26 CoreTech Incremental Encoders are now programmable, allowing users to freely program the width of the zero pulse and the number of lines from 1 to 8,192. This allows users to replace multiple encoders with a single type of encoder that can be programmed at any time, in any location, for any application.

		Comtrol enhances Edgeware RFID controller - 04/09/07 Edgeware now comes with DualConnectPlus, which provides filtering of string, RFID, and barcode data while extracting the barcode and RFID parameters. It can simultaneously connect serial and Ethernet devices to PLCs and applications.

		Logic Beach introduces ILIM-7 module for IntelliLogger - 04/06/07 ILIM-7 Interface Module offers 8 isolated high-resolution, 16+ bit, universal bipolar analog inputs. This allows IntelliLogger models IL-80 and IL-20 to increase channel count to a possible 128 total inputs. IntelliLogger is a self-contained autonomous data collection and Web page server.

		US Digital announces MAE3 magnetic kit encoder - 04/04/07 MAE3 miniature absolute magnetic kit encoder provides shaft position information over 360° of rotation with no stops or gaps. The magnetic encoder can mount to an existing shaft to provide digital feedback information.

		Moore Industries' EPX2 E/P transmitter runs on natural gas - 04/04/07 The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

		Wago announces PROFINET bus coupler for I/O - 04/02/07 The 750-340 series bus coupler can be used to connect local or distributed I/O on a PROFINET industrial Ethernet network.

		Emerson expands Ethernet I/O of Bristol RTU - 04/02/07 The Bristol ControlWave Micro Hybrid RTU supports larger applications with dual Ethernet ports that provide network segmentation without the need for external routers.

		Connect One releases Socket iWiFi secure WiFi Module - 04/02/07 Socket iWiFi secure serial-to-WiFi embedded device server connects devices running machine-to-machine (M2M) applications to 802.11b/g wireless LANs and protects them from network attacks.

		Lanner introduces EM-9640 motherboard for graphics - 03/29/07 EM-9640 mini-ITX embedded motherboard supports ultra low power AMD Geode NX processors, including the AMD Geode NX1500 @ 6W and the Geode NX 1750 @ 14W, and is suitable for graphics-intense digital signage and panel PC applications.

		RENCO announces R35i high resolution encoder - 03/29/07 The R35i has TTL output resolution with up to 8192 cycles per revolution, (32768 counts per revolution with quadrature).

		NI releases PCI-based Oscilloscopes - 03/27/07 PCI-5152 general-purpose digitizer converts a desktop PC into a full-featured oscilloscope. PCI-5105 eight-channel, 60 MS/s, 12-bit data acquisition board is ideal for building high-channel-count systems in application areas such as linear and phased-array ultrasonic NDT.

		ASI releases OSHA-Compliant Emergency Stop - 03/27/07 The e-stop station comes with a red actuator and a yellow enclosure to meet international and domestic requirements. The red switch on a yellow background normally reserved for e-stops meets OSHA, NFPA 79 and ISO 60204-1 requirements.

		Computer Aided Solutions announces Squirrel SQ2010 Data Logger - 03/27/07 The SQ2010 is designed for mobile data logging applications such as field research and engineering projects. This data logger is very easy to set up and use via its intuitive icon driven display and integral four button operator interface.

		Green Hills Software enhances PSN secure networking - 03/26/07 Platform for Secure Networking (PSN) now supports NextHop Technologies GateD advanced layer 3 IPv4 and IPv6 routing software.

		Opto 22 adds SNAP I/O Modules - 03/23/07 Models include the 32-channel SNAP-AIMA-32 current input module; 32-channel SNAP-AIV-32 voltage input module; and the 16-channel SNAP-IAC-16, SNAP-IAC-A-16, and SNAP-IDC-16 digital input modules. These I/O modules connect to and communicate with sensors, actuators, instrumentation, and equipment in industrial applications

		Agilent introduces 82357B USB to GPIB I/O - 03/22/07 The 82357B provides a direct connection from a USB port on a laptop or desktop PC to GPIB instruments. Its USB 2.0 connectivity offers easy plug-and-play setup, as well as a high-speed GPIB transfer rate of 1.15 MB/s or better.

		Advantech Launches USB I/O Modules - 03/22/07 USB digital I/O modules include USB-4750 32-channel, USB-4751 48-channel, and USB-4751L 24-channel. All include USB connectors with screw fasteners and DIN-rail mounting kits. They draw power directly from the USB port and therefore do not require an external power supply.

		United Electric announced UEIModbus I/O module - 03/22/07 UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

		austriamicrosystems launches AS5140H tough rotary encoder - 03/22/07 The AS5140H 10-bit rotary encoder IC is qualified to AEC-Q100 and designed for applications in an ambient temperature range up to 150°C. With a resolution of 0.35 degrees, it can recognize 1,024 positions within one 360° turn, and is accessible with either a serial or a PWM (Pulse-Width Modulation) interface.

		Power Sources Unlimited announces TES-5 DC/DC converters - 03/21/07 TES-5 Series of low profile, surface mount dc/dc converters offer 5W of power and a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation is 1500VDC. It has short circuit protection, remote on/off, operating temperature of -40ºC to +85ºC, with full load achieved up to +71ºC.

		GE Fanuc announces isolated Relay Output Module - 03/20/07 The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

		Acromag releases Virtex-II FPGA modules with digital I/O - 03/16/07 User-configurable FPGA modules feature conduction cooling and differential digital I/O at a cost that is suitable for many mid-level computing functions. The modules provide the ability to configure custom I/O boards using application-specific instruction sets..

		Opto 22 introduces dual Ethernet SNAP I/O Brains - 03/15/07 The SNAP-PAC-EB1 and SNAP-PAC-EB2 I/O Processors have dual, switched 10/100 Mbps Ethernet interfaces. This built-in two-port Ethernet switch design lowers network equipment costs by making it possible to build multi-drop I/O networks over standard Ethernet cable.

		Advantech Launches MIC-3723 Analog Output Card - 03/15/07 MIC-3723, a 3U CompactPCI 16-bit 8-channel non-isolated analog output card, starts at $695. Each analog output channel is equipped with a 16-bit double-buffered DAC and has an auto-calibration function and BoardID switch.

		Measurement Computing announces 500 series data loggers - 03/14/07 The USB-503 logs up to 32,510 voltage measurements over a 0 to 30 VDC measurement range. The USB-504 logs up to 32,000 current loop measurements in the 4-20 mA range. The tiny USB-501-LT logs up to 4,080 temperature measurements in the 14 to +122 °F range.

		ACCES I/O announces 104-IDI-48 Series PC/104 Digital Boards - 03/13/07 PC/104 utility boards have 48 individually optically isolated digital inputs, making them suitable for use in control and instrumentation applications where high-voltage protection is required. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Price: $349.

		B&R announces open safety protocol for real-time Ethernet - 03/13/07 Ethernet Powerlink Safety Technology is independent of the transport protocol, and is completely compatible with other fieldbus solutions such as CANopen. All safety-oriented mechanisms, which are open and available, are implemented in the data transfer process so that safety-relevant data can be transferred over a standard fieldbus. With this solution, safety functionality is completely integrated in the control system and does not require special cabling.

		BEI introduces Model M58 Metric incremental encoder - 03/08/07 The 58 mm diameter industrial grade metric incremental encoder is available with either a standard 10mm shaft or 6mm shaft. The M58 provides resolutions up to 80,000 cycles per turn, resistance to shock and vibration, and IP65 environmental protection. IP67 is available with a sealing flange.

		ControlAir announces Type-590X I/P Transducer - 03/07/07 Type-590X current-to-pressure transducer is small in size and light weight, yet is less sensitive to shock vibration and position change than most other I/Ps. It can mount in any position and is impervious to RFI/EMI interference.

		Pepperl+Fuchs introduces field junction boxes for Fieldbus - 03/07/07 Field Junction Boxes facilitate quick and easy mounting of P+F Segment Protector and Field Barrier fieldbus wiring components, terminators, spur connectors and surge protection devices.

		SigmaQuest updates SigmaSure 6.0 with repair insight module - 03/07/07 Repair Insight sofware pinpoints source of product failures, tracks and compares repair histories and makes recommendations on which repairs are most effective. The repair module is ideal for electronic manufacturers that are seeking to reduce warranty costs and improve product performance across the entire lifecycle.

		NI adds 19 I/O Modules and LabVIEW to CompactDAQ - 03/05/07 Modules include 20 mA current I/O, channel-to-channel isolated analog inputs, RTD sensor inputs, high-density digital I/O, and a universal input module. Each CompactDAQ chassis is shipped with the LabVIEW SignalExpress data-logging software.

		Foxboro announces migration solution for Moore APACS - 03/05/07 Foxboro migration cards enable Moore users to easily upgrade their legacy APACS ACM and ACM+ control systems to Invensys technology, including the latest generation of I/A Series distributed control system (DCS) and InFusion enterprise control system (ECS) technologies.

		Opto 22 introduces SNAP PAC Racks - 03/05/07 SNAP PAC racks are used with rack-mounted SNAP PAC R-series programmable automation controllers (PACs) and SNAP PAC brains. The racks are available in four sizes and can accommodate 4, 8, 12, or 16 SNAP I/O modules, allowing up to 512 I/O points on a single rack.

		Exele enhances TopView to remotely Monitor Alarms from Smartphones - 03/05/07 Enhancements include remote monitoring from Windows Mobile Smartphone, enhancements to the desktop Remote Viewer, and alarm limits.

		IntelliCom updates NetBiter web based I/O - 03/05/07 NetBiter can detect and send event information to users as email, SNMP, Modbus TCP or SMS to mobile phones. Events can be configured to appear on I/O changes or at specific Modbus register changes.

		Sensicast launches SensiNet web-based monitoring service - 03/01/07 SensiNet Services lets plant/facility managers employ temperature, energy and moisture monitoring applications over the Internet, without having to locate the applications within their own network infrastructure.

		Opto 22 announces SNAP PAC System - 03/01/07 The SNAP PAC system includes PAC Project Software Suite, higher performance SNAP PAC brains, five SNAP I/O modules, four SNAP PAC racks, OptoDataLink enterprise connectivity software, SNAP Motion Control Subsystem, and SNAP PAC Sim, a software application that simulates a fully functioning SNAP PAC controller on a PC.

		Baldor introduces Ethernet Powerlink three-phase AC drives - 03/01/07 The introduction of three-phase AC drives means that users can build all-Ethernet systems with the optimum choice of motor technology for each axis, from small to large loads. Rotary and linear versions of brushless servo, and AC vector motors are all software selectable.

		Advantech launches USB-4716 16-bit USB I/O Module - 02/28/07 USB-4716 200 kS/s 16-bit multi-function USB I/O module includes a USB connector with screw fasteners and a DIN-rail mounting kit. It draws power directly from the USB port and therefore does not require an external power supply.

		Beckhoff Automation announces Mini PCI Fieldbus Cards for Industrial PCs - 02/27/07 Mini PCI fieldbus cards support PROFIBUS, CANopen, DeviceNet and Ethernet networks. The resulting smaller PC size saves valuable control cabinet space, but, like standard PCI fieldbus cards, the interfaces are optimized for fast controllers and real-time tasks.

		Bosch Rexroth releases CA44 Pneumatic Valves with AS-i - 02/26/07 Series CA44 two-station valve manifolds comply with AS-I specification V2.11 Rev. 1. Manifolds are avaiilable with or without digital inputs, and with or without auxiliary power. Plug-in valve design simultaneously makes both the electrical and pneumatic connections when plugging the valve into place - eliminating the need to disturb electrical wiring connections.

		Honeywell updates Field Device Manager to support EDDL and FDT - 02/26/07 Field Device Manager R301 supports both the latest Electronic Device Description Language (EDDL) and Field Device Tool (FDT) with Device Type Manager (DTM) technologies without the use of conversion tools or add-on devices. It allows configurations to be managed, monitored and changed for a large number of HART devices. Additionally, Field Device Manager can support Profibus devices through FDT.

		ODVA publishes CompoNet specification for CIP networks - 02/25/07 Complementary to the entire family of CIP Networks, CompoNet meets the requirements of applications using large numbers of simple sensors and actuators by providing high speed communications with configuration tools and combining this with efficient construction, simple set-up and high availability – all on a single network.

		Pepperl+Fuchs introduces VBA AS-Interface I/O Nodes - 02/23/07 VBA family of I/O modules for AS-Interface specification 3.0 is CE marked and UL listed. It supports extended addressing with 4 inputs and 4 outputs for up to 62 nodes per network.

		Online Development enhances xCoupler Module for ControlLogix - 02/21/07 Enhancements to xCoupler plant to business system data modules include message acknowledgement, handshaking and store-and-forward features. These modules work with Rockwell Automation ControlLogix PACs.

		ASI introduces PCB Terminal Blocks for Automation and Control Equipment - 02/20/07 Printed circuit board terminal blocks for automation and control applications have moving clamp wire termination, UL 94V0 housings, nickel-plated copper metal parts to withstand any environment, high density and pluggability. Applications include I/O boards, motion controllers, drives, digital panel meters, flow meters, etc.

		Advantech announces PCI-1742U data acquisition card - 02/16/07 PCI-1742U PCI bus high-resolution multifunction DAQ card has 16x single-ended or 8x differential analog input channels, 1.0 MS/sec single channel sampling rate (800 KS/s multi-channel), 2x 16-bit D/A output channels, 16x digital input/output channels, and 1x 10 MHz 16-bit counter channel. Prices start at $745.

		MOXA’s ioLogik E2000 Active Ethernet I/O works with NI LabVIEW - 02/14/07 Active Ethernet I/O extends LabVIEW's remote monitoring capability. LabVIEW's built-in Modbus library can easily be used to connect to an Active Ethernet I/O server. LabVIEW also has a passive TCP software component that can instantly receive TCP/UDP messages from Active Ethernet I/O servers.

		MTL introduces 9331-TI Fieldbus Temperature Input Multiplexer - 02/13/07 The 9331-TI handles 2 and 3 wire RTD, thermocouple, voltage and resistance inputs, with each unit supporting eight independently configurable temperature inputs. In applications like distillation columns, tanks, reactors, boilers, etc., it can reduce installed costs by as much as 70% per point when compared to traditional single temperature inputs.

		Sealevel Systems releases SEAI/O-OEM boards - 02/08/07 SeaI/O-OEM family of bus-independent I/O boards offer a choice of host connectivity and a wide range of digital, analog, and serial control capabilities. The boards are suitable for expanding OEM computing platforms including ITX, EBX, EPIC, and ATX designs.

		Rockwell Automation releases Fast Analog module - 02/01/07 Using on-board data archival, the Fast Analog module increases system throughput by reducing the overhead required in collecting high-speed data. Featuring four archiving inputs and two outputs, the module generates extremely fast sample rates, while decreasing backplane traffic for optimized system performance.

		ASI announces High Density PLC Relay Interface - 01/30/07 The 6.2mm wide PLC relay interface consists of a base terminal block and a pluggable relay. The heavy-duty long life electromechanical relays are rated for AC or DC circuits and are ideal for all types of inductive applications. The pluggable relays can be replaced quickly and economically without having to remove the wiring.

		Lantronix launches $20 XPort embedded device gateway - 01/30/07 The XPort Direct embedded device gateway is a complete, miniaturized communications subsystem targeted at applications that need to move commands, status and information over IP networks or the Internet, to or from remote devices.

		Matrikon releases free Operational Insight Lite OPC software - 01/29/07 Operational Insight Lite, a software tool to acquire, display, and analyze OPC data, is available as a free download to a limited number of beta users in February, then will be free to all in April. It includes the ability to access both real-time and historical data.

		ASI expands line of M8 sensor distribution boxes - 01/22/07 M8 sensor distribution boxes are now available in a PUC and PVC cable version, a version with M12 connectors for common power connections along with sensor signals, and a version with terminal blocks, allowing for field wiring installation by the customer.

		HEIDENHAIN announces two I/O Boxes for machine tools - 01/22/07 IOB 49 and 89 work with the company's counters for applications on any machine tool, including milling, turning, boring and drilling machines up to three axes.

		Thompson Environmental releases satellite-based telemetry system - 01/18/07 The SWIMS (Simple Wireless Information Management System) programmable data collection and satellite telemetry platform is suitable for remote and offsite monitoring. The unit features multiple analog, digital, RS232 serial, pulse, and frequency inputs. An optional power pack adds a 10 watt solar panel and sealed battery with digital charge regulator for a fully self contained system.

		United Electric releases DNA-AO-308 analog output boards - 01/17/07 The boards offer 8 analog output channels with maximum update rates of 100 kHz per channel (800 kHz per board), 1500 Volts of isolation, one D/A per channel (allows simultaneous D/A updates), double buffering, low glitch outputs, and three utility digital I/O channels. The boards work with the company's PowerDNA data acquisition system.

		NI releases USB modules for CAN and LIN - 01/16/07 National Instruments released six USB modules for high-speed and low-speed/fault-tolerant Controller Area Network (CAN) and Local Interconnect Network (LIN) monitoring, logging and testing,

		US Digital introduces tiny 10-bit magnetic shaft encoder - 01/11/07 The MA2 miniature absolute magnetic shaft encoder provides 1024 unique positions per 360° of shaft rotation. The miniature encoder is less than 5/8 in. in diameter and just over one inch in length, including the shaft and bushing. Its magnetic single chip sensing technology makes it ideal for applications in harsh environments.

		Advantech releases PC/104 4-axis motor control card - 01/09/07 The PCM-3240 stepping/pulse-type servo motor control card starts at $845. The card's intelligent NOVA MCX341-motion ASIC provides a variety of motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, and T/S-curve acceleration/deceleration rate. The PCM-3240 performs these functions without requiring any main CPU processing. The PCM-3240 fits onto a standard PC/104 board.

		National Instruments releases USB data acquisition devices - 01/09/07 The USB-6221 and USB-6229 DAQ devices provide up to 32 analog inputs with a 250 kS/s single-channel sampling rate. Both have signal streaming technology, which uses the bandwidth and performance of Hi-Speed USB technology to allow bidirectional high-speed transfer of data between the USB device and a computer.

		Rockwell Automation releases embedded I/O for conveyors - 01/09/07 The Allen Bradley 1799 Embedded I/O product line for conveyor applications now includes the On Machine solution, which combines I/O circuits, a power supply and network adapters into a single IP00 module that provides local control of outputs using DeviceLogix technology. The built-in DeviceNet communications links the machine to the controller for increased speed and efficiency.

		UEI releases High Speed Fiberoptic Interface for DAQ system - 01/08/07 The fiber interface extends the maximum distance between a PowerDNA I/O Cube and its host computer from the 100 meter Ethernet/100BASE-T limitation to 2 kilometers. The 2 km limitation reflects the use of standard, off-the-shelf multimode fiber.

		Advantech launches 48 channel digital I/O card - 01/03/07 The PCI-1739U 48-channel digital I/O universal PCI card for both 3.3 V and 5 V PCI bus signaling starts at $195. It uses Opto-22 compatible 50-pin connectors for interfacing to many signal conditioning and termination options.

		TURCK announces fieldbus I/O blocks - 12/24/06 The JRBS line of spur blocks for FOUNDATION fieldbus and PROFIBUS PA provides the convenience of DIN-rail mounting in a rugged IP 20 design. All JRBS products contain a selector switch for segment termination, and allow the segment to be continued for distribution of instruments in other locations with no additional accessories required.

		Sealevel Systems introduces high-current relay USB module - 12/21/06 SeaDAC PLC-16H digital I/O module combines high-current Form C outputs and optically isolated inputs. It has eight SPDT high-current Form C relays that can directly switch up to 6A loads at 250VAC and 100VDC. Additionally, eight non-polarized inputs can monitor 5-30VDC and provide optical isolation to protect the host computer and other sensitive equipment from voltage transients.

		SIXNET announces RTU for utility industry applications - 12/20/06 The mini-IPm PLUS has Ethernet, up to 4 serial ports and a built-in mix of 26 discrete and analog I/O. It is pre-loaded with open-source Linux and the IPm firmware which offers automation, control and data acquisition capabilities. For utility applications, IPm+ also includes pre-loaded software for AGA gas flow calculations and DNP-3 time stamped communications.

		Vishay releases data acquisiton system for strain gauges - 12/19/06 System 7000 acquires, reduces, and presents data from strain gages and related sensors for stress analysis testing. Users can intermix strain gages, strain-gage-based transducers, thermocouples, and other sensors including those with high-level voltage outputs in groups of eight by choosing the appropriate sensor card for up to 128 channels in a 4U-height, 19-inch, rack-mountable scanner.

		UEI adds QNX to its data acquisition system - 12/18/06 UEI added complete QNX Real Time Operating System (RTOS) support for its PowerDNA series of data acquisition and control cubes. With the new PowerDNA QNX library, QNX developers can take advantage of the deterministic timing afforded by QNX. The Library may be deployed on any host computer running the QNX RTOS and connected to the PowerDNA cube over the Ethernet (10/100baseT).

		Acromag announces digital I/O module with user-configurable FPGA - 12/18/06 IP-EP200 Industry Pack I/O modules provide a user-configurable FPGA for high-performance processing of custom logic routines and a digital I/O interface supporting a variety of signal types. It uses the Cyclone II FPGA for processing user-defined algorithms and custom logic routines. With JTAG access to the SignalTap II embedded logic analyzer, engineers can easily monitor internal device operation.

Automation.com Real-time Information for the Automation Professional May. 25, 2012

Cart

Automation.com

NOTICE: Your use of Automation.com constitutes your agreement to the Legal Notices, Policies, Terms, and Conditions governing its use. You should review these terms before proceeding.Copyright © 2000-2010 Automation.com - automation.com, automationtechies.com, automationtechies, automationtechie, and Member-Match are all trade and service marks of Automation Resources, Inc. All Rights Reserved.