Saia Burgess uses horizontal carousels to store parts
Saia Burgess is a manufacturer of a wide range of motion control solutions at their Vandalia, Ohio manufacturing facility. Motion control solutions, such as solenoids and switches, are used in a wide range products globally including: ATMs, security monitoring systems, medical devices and military systems.
Leaning Towards Efficiency
With a company wide push to lean processes and cut waste, Saia Burgess turned their attention to the warehouse. "Lean initiatives were going on throughout the company, in every department," said Tim O'Brien, Materials Manager, "part of lean is taking out the waste and looking for better ways of doing things and the warehouse was right for that."
To keep nine manufacturing departments operating efficiently, Saia Burgess keeps just over 10,000 SKUs on hand, previously stored on shelving. "It became apparent we were doing a lot of very redundant activity through the day," said O'Brien, "Sometimes going to the same spot 10 or 12 times a day to pick the same part, just for a different work order."
In a lean effort to do more with less, Saia Burgess replaced the stockroom shelving with four KardexRemstar horizontal carousels integrated with pick-to-light technology and FastPic inventory management software. Seventy percent of all parts (6,800 SKUs) are stored in the new carousel system, with bulk SKUs remaining in the shelving. "We shrank the number of people required, cycle count accuracy is higher and we are able to pick orders faster and more efficient, it was a very successful lean effort," said O'Brien.
The Paper Picking Past
Prior to introducing automation into the stockroom, workers had a one to one relationship with an order, each worker focused on picking one order at a time. Pick tickets were generated daily and workers would walk throughout the shelving searching for all the parts they needed to complete the order. When the order was complete, they would deliver it to the correct department and return to the stockroom to pick the next order in the pile of pick tickets. Workers often visited fast moving part locations several times a day, creating redundant activity.
The KardexRemstar Solution
Implementing four KardexRemstar horizontal carousels integrated with pick-to-light technology and FastPic inventory management software changed the way orders were processed. One worker can now batch pick up to six orders simultaneously without walking or searching for parts. Eight assembly department group leaders print material packets indicating the parts they require. When the material packets are printed, the order is downloaded from the Material Requirements Planning (MRP) Movex software to the FastPic inventory management software. Part orders can be entered days before the material is required. The department manager delivers the materials packet and a cart to the stockroom, indicating the order is ready to be picked.
The carousel operator initiates six orders at a time using the FastPic inventory management software. Each order is assigned a separate position on the batch station. The carousels then rotate for the first pick, using pick lights to direct the operator to the exact location of the first pick. The operator picks the quantity indicated by the pick light and turns to the batch station to distribute the parts among the six orders as directed by the put lights. As the operator is distributing the parts from the first pick, the other carousels are rotating to present the next pick, virtually eliminating operator dwell time. This process repeats until the six orders in the batch are filled. Each order is then place on the cart provided by the department manager.
Any parts required for an order that are physically stored off the carousel are flagged at the beginning of the batch. Another stockroom picker will retrieve these parts from the shelving and then match them up with the orders on the department carts. All orders are filled and delivered to the correct manufacturing department within 24 hours. The stockroom processes an average of 220 orders per week, each averaging about eight lines per order. Small percentages (about 10%) of orders are shipped directly to customers, with no value added manufacturing required. These orders are processed in the same way, the cart is simply delivered to the shipping department for shipment directly to the customer.
The previous system required five people to pick orders manually from shelving. The stockroom now requires three people for picking, one to pick from the carousel, one to pick from bulk storage and one to replenish the carousels on second shift. That's a 40% labor savings.
Saving Space... and Money
As well as the labor reduction, Saia Burgess was able to recover floor space and get their parts all back under one roof. Previously, the 7,000 square foot on site stockroom was over capacity, forcing slow moving items to be stored off site in a 1,600 square foot space. All parts are now stored onsite in a 5,000 square foot automated stock room, saving 42% floor space and eliminating a $4,000 off site monthly storage charge. Of the 2,000 square feet that was recovered on site, a portion was used to expand manufacturing (value added operations) and a portion was used to expand the shipping department.
Hot & Accurate Picking
In manufacturing environments, hot picks are inevitable and occur when parts are needed in manufacturing immediately due to scrapped or lost pieces. When a manufacturing operator identifies the need for a hot pick, they fill out a materials request form and head to the stockroom. With the push of a button the carousel operator is able to interrupt the batch orders they are picking, retrieve the hot pick for the waiting manufacturing operator and then easily return to picking the batch of orders.
Delivering the right part and the correct quantity to the right place can help to reduce the need for hot picks. "Previously, accuracy rates were below 94%," says Kelly Greene, Distribution Business Unit Manager, "Since the implementation of the carousel and some other key policy changes, our accuracy is just below 99% and we have been able to hold that for the past year."
Adding Part Numbers
The ability to add new parts to the system on the fly is important. "Saia Burgess is a make to order manufacturer, we rarely build stock parts. We get an order, we build an order," says O'Brien, "a new order usually means new components, which means more parts for the stockroom." New parts are identified upon receipt, added to the FastPic software and stored in the carousels. "It's a 30 second process to create the part number and enter in the information and set it up with the location," says Greene, "We can also do a mass download periodically to update any new part numbers if we would get a large amount."
As a responsible manufacturer, Saia Burgess did an extensive ROI analysis before leaning their stockroom operations. Coincidentally, three pickers in the stockroom were planning to retire in the next few months. Not replacing their positions and adding their saved salaries along with the gained efficiencies created an easy ROI. "I got my accounting group involved to make sure we were capturing every penny and not putting anything in the ROI that wasn't true," said O'Brien, "We calculated a payback of eighteen months. Those people have retired and we have not needed to replace them so we've hit our payback."
KardexRemstar Inc., a company of the Kardex AG Group is a leading provider of automated storage and retrieval systems for manufacturing, distribution, warehousing, office and institutions.
MORE CASE STUDIES
SKF automates factory with Egemin automated storage system
With the new system, SKF can organize the logistics of its bearings, lubricants and seal products more efficiently and economically. The completed...
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Rotork actuators support environmental improvement at Aberthaw Power Station
Through the use of automation that includes Rotork valve actuation, Aberthaw can efficiently generate around 1555 MW of electricity for the...
MAVERICK uses DCSNext solution to move DCS migration project to final phase
DCSNext capabilities allow INEOS Styrolution to avoid any additional downtime during migration and leverage the complete benefits of the latest...
Axiom automates B2C Europe with 100 destination packet mail sorter
The new sorter has automated B2C Europe's parcel and pack sortation, enabling the company to sort up to 8,000 packets an hour. This has given the...
Flowserve Collaborates with NI, HP and PTC to Enable Predictive Maintenance for Process Control
By Cory Fogg, Automation.com
Efficient predictive maintenance has been a goal of the process industry for ages. This article discusses the efforts...
Real World Results When Demand-Driven Production Planning and Scheduling is Synchronized
By Thomas R. Cutler and John Maher
In today’s complex manufacturing environments, the physical processes of manufacturing involve so many moving...
Axiomtek partners with SYSCON-PlantStar to facilitate Asian manufacturing
Axiomtek is a design and manufacturing company in the industrial and embedded computer field. The company also employs an international service...
Deutsche Messe announces Krister Sandvoss as CeMAT project manager
Along with the CeMAT exhibition in Hannover, his responsibilities include the foreign exhibitions of Deutsche Messe in the field of intralogistics.
Industrial Wired vs. Wireless Networking on the CNC Shop Floor
In order to improve efficiency and remote management on the CNC shop floor, networking is required from both device level and infrastructure...