Zero-Max's New CD® Coupling Sizing & Selection Software Has 3D CAD Models.
Now containing 3D CAD models, this new Zero-Max software provides the ideal component recommendation for a given set of operating requirements. Software users are guided through a few easy steps at their computer to select the right Zero-Max CD coupling. They enter coupling RPM needed, peak torque, angular, axial and parallel misalignment, service factor and the shaft sizes.
The program then gives the recommended coupling model in the appropriate size, showing all operating parameters for that particular coupling. Data such as torsional and axial stiffness, moment of inertia, maximum speed, operating torque and maximum allowable angular, axial and parallel misalignment are shown along with 3D drawings.
The software is available FREE for all Zero-Max CD coupling models that are designed for cyclic applications where speed and repeatable accuracy are critical in 24/7 environments, and for Zero-Max Servo Class high misalignment servomotor couplings.
Call 1-800-533-1731 for a FREE CD ROM of this sizing software. Outside US and Canada, call 763-546-4300. Or go to www.sizingcd.com/3933.
Write to Zero-Max, 13200 Sixth Avenue North, Plymouth, Minnesota 55441-5509. Fax: 763-546-8260. Email: [email protected].
Qorvo announces free e-book series that explains the Internet of Things
Internet of Things For Dummies and Internet of Things Applications For Dummies are designed to help technical and nontechnical professionals...
Webinar: Intrinsic Cyber Security Changes Everything About Automation
Bedrock Automation and Automation.com join together to present this free December 14 webinar on cyber security and how it enhances productivity and...
EtherCAT Technology Group publishes EtherCAT P technology specification
EtherCAT P is a new industrial Ethernet technology that combines EtherCAT communication and power lines into one standard 4-wire Ethernet cable.
WSCAD releases expanded electrical CAD data library
Over 140,000 updated parts, data and new records were added in 2016, including several from manufacturers such as BALLUFF, DRAGO, Phoenix Contact,...
Control Station announces 2017 manufacturing training schedule
Training workshops will be delivered in collaboration with the company’s Solution Partners and Product Distributors, and they will emphasize...
HIMA introduces turbine safety solutions at POWER-GEN International
The HIMA SIL 3 platform combines all safety functions and machinery control, including overspeed trip and anti-surge control and meets all...
Modular Panel PCs Provide Flexibility in Automation
By Joseph Yang, Advantech
Many other automation technologies such as programmable logic controllers (PLCs) are already modular, so the concept of...
CADENAS software used to automate LUCAS' robot quote generation
The assemblies of LUCAS are modular and built with numerous variable properties. The primary goal therefore was to automate the preparation of...
Cognex announces acquisition of two 3D machine vision companies
On October 27, 2016, Cognex acquired EnShape GmbH, a maker of advanced 3D vision sensors and software based in Jena, Germany. On August 30, 2016,...
Microscan announces free machine vision training course
The course will be held in Microscan’s Northeast Technology Center in Nashua, New Hampshire, from December 6-8, 2016 at 8:30 AM to 4:30 PM daily....