Adalet announces Increased Safety pilot devices
All operators are for use in control circuits functioning in Zone 1 & 2 or Division 2 rated environments and are used in conjunction with Adalet's increased safety control enclosures. These heavy duty operators are suitable for use in hazardous or corrosive atmospheres and are watertight for NEMA 4 applications. Adalet's Exe pilot devices are ATEX certified for European applications as stand alone devices or when installed in an ATEX certified increased safety enclosure. The devices are designed to fit into a standard 30.5mm opening and constructed from die-cast aluminum for rugged, industrial applications. Various contact block arrangements are available for pushbuttons and selector switches and various color LED bulbs are available for pilot lights.
Adalet Increased Safety pilot devices will not generate an arc or spark during normal operation and in which surface temperatures are controlled below incendive values. The pilot devices, along with the Adalet line of Increased Safety 'Exe' enclosures, include design measures to resist impact and prevent the possibility of excessive heat and the ingress of water or dust, thus preventing an explosion from occurring. All of Adalet's Exe operators are designed from a die cast aluminum alloy which allows our devices to stand up in harsh environments. These heavy duty operators are for use in control circuits functioning in environments containing hazardous gas, hazardous dust, or hazardous fibers areas and are also suitable for weather-tight NEMA 4X applications.
GF Piping introduces Signet 9950 transmitter
The transmitter meets CE, UL, and CUL standards and is suitable for a variety of applications including water/wastewater treatment systems, reverse...
Werum introduces PAS-X KPI MES software for pharmaceuticals
PAS-X KPI is a KPI/OEE tool dedicated to the pharmaceutical and biopharmaceutical industries. It is capable of integrating data both from the ERP...
Electro-Chemical Devices introduces the X80 transmitter and S88 measurement sensor
With 316 stainless steel housing and sealed display, the X80 Transmitter and the S88 Sensors are designed to eliminate the need to inventory...
Applied Motion announces STAC6-Q-H stepper drive for hazardous locations
The STAC6-Q-H stepper drive is ATEX and IECEx certified for Class I, Zone 2 locations, and UL certified for Class 1, Div 2, Group C & D locations.
GE Digital announces Brilliant Manufacturing Module for WIP Manager
This module, enabled by Predix, GE’s operating system for the Industrial Internet, works with existing systems to provide true visibility into...
Siemens to supply propulsion systems for all-electric ferries
The all-electric ferries operated by Fjord1 will ply the E39 Anda-Lote route on the west coast of Norway. Both will have a cargo capacity of 120...
Beckhoff opens Texas sales and support facility
The eighth such regional facility in the U.S., the Plano facility includes sales offices, engineering labs and training facilities. This 2,600...
SMTA presents Nordson with SMTA Corporate Partnership Award
Nordson was recognized for its willingness to share technical knowledge with others in the electronics manufacturing industry as evidenced by the...
NEMA releases revised version of NEMA MG 1 Motors and Generators guide
NEMA MG 1 addresses new U.S. Department of Energy (DOE) regulations that require motor manufacturers to comply with efficiency targets. The new...
ABB announces NKT Cables acquisition of ABB's cable system business
NKT Cables is acquiring ABB’s global high-voltage cable system business with a total value of 836 million euros (US$934 million). The business is...