Alliance announces OHAUS Defender 7000 bench scale
The Alliance/OHAUS Defender 7000 Bench Scale features a multi-functional indicator with multiple weighing modes including counting, percent weighing, dynamic (animal) weighing, check weighing, display, hold and accumulation. Designed to stand-alone or control conveyors, feeders, and other equipment, it provides an RS232 interface with GMP/GLP data output, an optional DC or AC relay control kit, and additional RS232 or RS485/422 interfaces.
Available in five models with 25 lb. x 0.002 lb. to 500 lb. x 0.05 lb. capacities and 13.8 or 26.8 columns for the indicator, which can also be remotely mounted, the Alliance/OHAUS Defender 7000 Bench Scale has a stain- less steel removable weighing platform, painted steel column and base, an aluminum load cell, and ABS indicator. Easy to operate via an alpha-numeric keypad, it has a 255 item library function and multi-language operation.
The Alliance/OHAUS Defender 7000 Bench Scale is priced from $895.00 up, depending upon capacity and accessories.
American Control Electronics announces DCH403-10 motor control
The DCH403-10 combines a custom regen-capable switching power supply with a low voltage drive to allow control over low voltage motors without the...
Zaber introduces GSM motorized goniometers
Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of...
Phoenix Contact introduces PT 2,5/S-QUATTRO terminal blocks
Up to four 12 AWG conductors can be connected in one feed-through terminal block. The terminal blocks feature Phoenix Contact’s push-in...
Mantracourt announces DSCUSB-PT potentiometer input module
This introduction to Mantracourt’s range of signal converters can be used with resistance based sensors to indicate position, rotation, angle and...
Micro-Epsilon's confocal chromatic controller
Providing a measuring rate of 70kHz, the confocalDT 2471 HS high speed controller is currently the worldwide fastest confocal chromatic controller....
SKF automates factory with Egemin automated storage system
With the new system, SKF can organize the logistics of its bearings, lubricants and seal products more efficiently and economically. The completed...
Axiom automates B2C Europe with 100 destination packet mail sorter
The new sorter has automated B2C Europe's parcel and pack sortation, enabling the company to sort up to 8,000 packets an hour. This has given the...
Measuring Bearing Vibration Levels
By CAS Dataloggers
The diagnosis of bearing damage in roller bearings is an integral part of servicing and maintenance tasks. This whitepaper...
Deutsche Messe announces Krister Sandvoss as CeMAT project manager
Along with the CeMAT exhibition in Hannover, his responsibilities include the foreign exhibitions of Deutsche Messe in the field of intralogistics.
ABB announces 2nd edition of Single Loop Control Methods
The objective of Single Loop Control Methods is to help make the complicated subject of process control more easily understood by process engineers...