Altech announces ATEX strain reliefs for cable entries
Altech ATEX polyamide strain reliefs are available with NPT threads (3/8 to 1) or metric threads (M12 to M63). The trapezoidal threads contribute high torque for a tight and permanent fit of the dome nut. Wide clamping ranges (from 2.5-6.5mm to 35-48mm, depending on type) ensure maximum strain relief in service.
Mounting is accomplished easily using a flat seal and metal locknut. Upon installation, the strain reliefs offer ideal gas- and water-tight solutions with the capability to perform over a broad temperature range (from -20ºC to 60ºC and -4ºF to 140ºF).
Custom products, including strain reliefs with extended threads, can be developed to satisfy particular application requirements.
Comau introduces Racer5-0.63 & Racer5-0.80 industrial robots
Racer5-0.63 and Racer5-0.80 are both controlled by the R1C 19" rack-mounted controller, which can be integrated into a single cabinet to control an...
Knick introduces P50000 line of transducers
The ProLine P50000 series from Knick was specially developed for voltage and current measurement in main and auxiliary power circuits of...
FLIR releases upgraded A35/A65 temperature sensors
Designed for process control and quality assurance, the cameras are available with 10 field-of-view options, from 8 degrees up to 90 degrees, to...
Pentek introduces FlexorSet models 5973-313 & 7070-313
Each FlexorSet is a multichannel data converter sub-system with programmable analog I/O signal interface suitable for connection to HF or IF ports...
Balluff introduces IP69K rated series of beam sensors
These stainless steel fork sensors are available in 50mm and 80mm widths and are designed for the food and beverage, packaging, metalworking and...
aeSolutions' Paul Gruhn named co-chair of ISA84 committee
As co-chair, Gruhn will help build consensus among participants on ISA84 standards interpretations and modifications, ensure that the committee...
Choosing the Right PLM Software
By Bob Hillier, Design Rule
This article discusses the ideal process of selecting the product lifecycle management (PLM) software for today's...
Flowserve Collaborates with NI, HP and PTC to Enable Predictive Maintenance for Process Control
By Cory Fogg, Automation.com
Efficient predictive maintenance has been a goal of the process industry for ages. This article discusses the efforts...
2016 ISA Process Control & Safety Symposium and Exhibition features three acclaimed speakers
Attending engineers, technicians and plant managers will be able to gain the latest insights, news and trends in process measurement and control,...
SKF automates factory with Egemin automated storage system
With the new system, SKF can organize the logistics of its bearings, lubricants and seal products more efficiently and economically. The completed...