AutomationDirect SureStep Stepper Motor Control System
The SureStep family includes four standard motors and a "one-size-fits-all" step motor drive. With holding torques from 83 oz-inch to 434 oz-inch in NEMA size 17, 23 or 34 frames, the motors handle a wide range of automation applications, including woodworking, assembly and test machines. The motors operate on 2.8 A per phase (size 17 motor uses 2.0 A). Their square frame style produces high torque and allows the motors to achieve the best torque-to-volume ratio. All four motors are connectorized for easy hookup.
A 20-foot extension cable with locking connector is a standard option to interface the SureStep motors to the 2-phase microstepping drive. The cable can easily be cut to length if needed. The drive operates any of the four standard motors and features standard +5 VDC optically isolated logic inputs for interfacing with DirectLOGIC PLCs and many other 3rd party controllers/indexers.
A 9-position DIP switch is used to set up the drive; no software or add-on resistors are required for configuration. The DIP switches are used for built-in self test, step angle selection, current level selection and optional idle current reduction.
Step pulses and direction signals from the DirectLOGIC PLCs or other indexers and motion controllers are "translated" by the microstepping drive into precise movements of the stepping motor shaft. The drive uses advanced microstepping technology with selectable step sizes of 400 steps per revolution (divide by 2), 1,000 steps per revolution (divide by 5), 2,000 steps per revolution (divide by 10) and 10,000 steps per revolution (divide by 50). The 2-phase bipolar motors have 200 full steps per revolution or 1.8 degrees per full step.
A standard 32 VDC, 4-amp linear power supply completes the SureStep line. The power supply operates at least two SureStep stepping systems of any size with an auxiliary +5 VDC regulated supply to facilitate DirectLOGIC PLCs and stepping motor drive interfaces.
AutomationDirect offers thousands of industrial automation products through its Online Superstore and 1,900-page catalog. Products include Programmable Logic Controllers (PLCs), AC drives/motors, operator interface panels/HMI, motor controls, DC power supplies, push buttons, sensors, NEMA electrical enclosures, wire duct and more. The company offers high-quality automation products at incredible prices, along with detailed documentation and superior sales and technical support. Same-day shipping on in-stock items ordered by 4 p.m. ET is standard. A 30-day, money-back guarantee is offered on most items, including software.
Select the process controls and industrial wiring supplies you need from over 6,000 quality products, often priced well below the industry average. To request a free catalog, visit their Web site or call 800-633-0405.
Request More Information
ams launches AS 7262 and AS 7263 multispectral sensors
Key solution spaces include material and product authentication, product quality and integrity as well as material content analysis in the...
Teledyne DALSA announces M4030, M4020, C4030 and C4020 Genie Nano cameras
Developed for an expanding number of industrial imaging applications, including intelligent traffic systems, printed circuit board inspection and...
CEL introduces CG series of SPDT RF switches
Target markets include test and measurement systems as well as Wi-Fi, ZigBee and Bluetooth routers, sensors, appliances, and other radio equipped...
Allied Vision introduces Manta G-1236 camera with 12 mega-pixel CMOS sensor
The Manta G-1236 incorporates the IMX304 CMOS sensor out of Sony’s Pregius series. This image sensor has a resolution of approximately 12.3...
Spectrum releases 14 and 16 bit LXI-based digitizers
The high channel density makes the instruments suitable for applications where arrays of receivers, sensors, detectors, rectifiers, antennas and...