Exele enhances OPCcalc and EDICTvb.Net software
August 16, 2011 - Exele Information Systems enhanced OPCcalc and EDICTvb.Net, a pair of process calculation software products for OPC (PLCs, SCADA, Control Systems, Historians) and OSIsoft PI. The version 3.7 release adds the ability to recalculate equations.
Under typical operation, process calculations run real-time, using current input tag values to calculate current output tag values. If a historian is available (OPC-had or OSIsoft PI), it stores the current output values, making the results available to reports and trends. In some instances, however, the calculated values that exist in the historian should be replaced. The calculation logic may have changed or input values to the calculation may have been modified (e.g. manual input or lab values).
Recalculation allows the user to re-run one or more calculation libraries for a period of time in the past. The previously calculated data can be removed, and the calculations will execute using the updated logic and/or inputs to repopulate the historical calculation results. All of this occurs without interruption to the real-time calculation libraries.
OPCcalc is a vendor-neutral, process calculation framework for OPC data. OPCcalc allows you to easily create and manage process calculations that read and write current and historical OPC data. OPCcalc handles all of the "plumbing" for your equations, letting you concentrate on your calculation logic.
EDICTvb.Net is a process calculation framework for OSIsoft PI. EDICTvb.Net allows you to easily create and manage process calculations that read and write current and historical PI data. EDICTvb.Net handles all of the "plumbing" for your equations, letting you concentrate on your calculation logic.
MicroPower Direct releases IG275E series of DC/DC converters
Three models operate from 12, 15 or 24 VDC input bus voltages, providing dual outputs of +15 VDC and -8 VDC; the recommended gate bias levels for...
EVT releases EyeSens ColorInspect vision sensor
The vision sensor levels out vibrations or fast movements of the machine in the production line. With IP67 and the integrated LED illumination in...
Delta Electronics announces PJT-27V150WBNA open frame power supply
The 3”x5” product comes with universal AC input voltage range at 90Vac to 264Vac, is usable worldwide and features built-in Power Boost of 175W...
GAST Manufacturing introduces GAST range of vacuum pumps and compressors
The three pump and compressor ranges include sixteen oil-free and oil-lubricated rotary vane models and, in a first for the organization, four claw...
Phoenix Contact introduces HMC series of circuit breakers
The HMC offers pluggable line and load terminations, along with the unique T-bus option that allows breakers to snap into a common power bus.
Hannover Messe 2017
HANNOVER MESSE covers a wider range of themes and exhibits than any other event – R&D, industrial automation and IT, industrial supply,...
Making OPC UA Secure for the Industrial IoT
By Bob McIlvride, Skkynet Cloud Systems
Securing an industrial system requires at the very least securing the perimeter against unauthorized...
Hilscher announces Craig Lentzkow as IIoT Business Development Manager
Mr. Lentzkow will be responsible for developing business opportunities for Hilscher’s netIOT Edge Gateways, through partnerships with global...
To Replace or Service Automation Systems: That is the Question
By Bill Lydon, Editor, Automation.com
For cost and efficiency purposes, most vendors will try to minimize downtime with already existing...
Hamilton Engineering chooses B-Scada to implement IoT capability
B-Scada’s Status Device Cloud IoT platform was used to provide the cloud-hosted software with visualization for real time and historical data,...