Exlar Tritex II AC Powered Actuators now offer UL Listing
March 9, 2011 — Exlar announces its Tritex II AC-powered electric actuators with positioning electronics are now UL Listed under file number E325731. Underwriters Laboratory is an independent testing laboratory with more than 100 years of product certification experience. Their product safety evaluations involve a comprehensive review of important safety issues, such as electrical shock, fire hazards and performance when it is inherent to safe product operation.
Tritex II actuators combine a brushless servomotor with either rotary or linear (output) actuation and Exlar’s digital position control. All elements are assembled into a single, compact waterproof housing. Tritex II actuators with their built-in mechanical converters eliminate the need for traditional ball screw or gear reducer mechanisms, providing a complete system solution. Incorporating all the required position control and power electronics into the actuator also eliminates the external servo amplifier and the cables associated with a typical servo system.
The new Tritex II actuators operate from 100-240VAC, allowing direct connection to factory power sources. Enhanced software features include 16 programmable indexes, linked moves and firmware flash upgrade capability via the actuator’s Modbus port. This port—via the RS/485 protocol—allows complete control, programming and monitoring of all aspects of the Tritex II actuator as it performs an application. Planned communications options include Modbus, Ethernet IP, HART, Modbus TCPIP, CAN Open, and CAN J1939 protocols.
The Tritex II actuator has I/O capability of eight digital inputs, four digital outputs, plus one analog input and output. Feedback choices include analog hall effect (standard) and an incremental encoder for high positioning resolution. The new Tritex II design offers excellent connectivity with internal terminals accessible through the actuator’s removable cover. Tritex II also offers provision for imperial or metric threaded ports for cable sealing glands, optional M23/M16 connectors for power and I/O, and an M8 connector for the RS485 port.
OES introduces AR59-AV vertical rotation stage
The AR59-AV vertical rotation stage is intended for: Micro robotics, metrology, vision systems, positioning of mirrors and lasers, laser machining...
MicroPower Direct introduces MR50SRW power converters
The MR50SRW series is has been designed for use in rail and transit applications. They provide the reliability, size, temperature operation and...
Alicat Scientific introduces MQ and MCQ series of mass flow meters and controllers
The MQ Series meters and MCQ Series mass flow controllers will operate in high pressure systems, up to 320 PSIA (22 bar). The products are designed...
Endress+Hauser introduces FMR10 and FMR20 free space radar level transmitters
The FMR10 measures liquid levels at ranges up to 16 feet with 0.2 inch accuracy, while the FMR20 measures levels up to 66 feet with 0.08 inch...
AutomationDirect announces Bimed cable glands for wiring solutions
Commonly known as a cable connector or fitting, cable glands secure wire or cable to electrical equipment while providing strain relief and...
Motion Control and Precision Positioning in Vacuum Environments
By Dr. Jürgen Gallus, PI
Vacuum applications are of growing importance due to technologies that can only be applied in vacuum or cryogenic...
NEMA releases revised version of NEMA MG 1 Motors and Generators guide
NEMA MG 1 addresses new U.S. Department of Energy (DOE) regulations that require motor manufacturers to comply with efficiency targets. The new...
Webinar: Increase Production and Optimize Manufacturing Processes Using Simulation
The webinar will show how engineers, production managers, and decision makers can rapidly assess the options for adapting an existing line to make...
NUM launches NUMmill CNC control solution
NUMmill is designed specifically for CNC milling machine manufacturers and control retrofitters. It offers an extensive suite of canned cycles,...