Kavlico introduces P250 sealed pressure sensors for harsh environments
Pressure ranges are available from 0-100 through 0-5,000 PSI absolute or sealed gage for the models P251/P251R and 0-6 through 0-400 Bar for the models P250/P250R. The P250/P251 operate on a 5 Vdc power supply and provide a ratiometric 0.5 to 4.5 Vdc linear amplified output proportional to pressure while the P250R/P251R have an internal regulator and operate on 9 to 32 Vdc while providing a regulated 5 Vdc or 10 Vdc linear amplified output proportional to pressure. Each sensor is temperature compensated and exhibit excellent EMI/RFI rejection capability. The high reliability sensors have an over-pressure capability of 2X FSO (Full Scale Output) and have been designed to operate in situations with large over-pressure spikes.
Typical industrial applications include refrigerant control and recovery, pumps and compressors, process control, water management, autoclaves, hydraulic systems, and test and monitoring equipment.
A wide variety of 12 standard electrical and 10 standard process connection options allow the sensors to be configured to meet each end-users application-specific requirement.
Adcole introduces the Adcole 1302 Dual Head Camshaft Gage
The Adcole 1302 Dual Head Camshaft Gage features two independent opposed Heidenhain side wall measuring heads with ±10 mm travel for measuring...
Sciemetric Instruments releases Model 3675 leak test station
The 3675 can combine up to three of Sciemetric’s 3520 Series Leak Test units in one stand, controlled by a single sigPOD controller.
Fluke announces addition of four pyrometers to Endurance series
Application areas include primary and secondary metals manufacturing, carbon processing, silicon production, and now also foundries and welding,...
Crouzet introduces BDE PRO external motor drive
This analog controller is suitable for use in a variety of markets including medical, access control, commercial and industrial applications, and...
PI introduces V-551, V-552 motor stages & C-891 motion controller to PIMag series
The stages are equipped with incremental and absolute-type linear encoders for direct position measurement and ironless 3-phase motors and...
Emerson to help EPH Lynemouth Power automate biomass-fueled power plant
When the conversion is complete in late 2017, the plant, near Newcastle in the United Kingdom, will be fueled by approximately 1.4 million tons of...
How Smart Instruments Enable Improved Pumping
By Nathan Hedrick, Endress+Hauser
Several instrument manufacturers offer various types of “smart instruments,” and their approaches vary. This...
Yokogawa to deliver control systems for Layyah Power and Desalinization Station in UAE
For this project, Yokogawa Middle East & Africa will deliver the CENTUM VP integrated production control system for the boiler, turbine governor,...
Rotork provides automated shut-off for heating pipelines in Northern Sweden bridge
Opened in 2014, the 2.1 kilometre bridge also carries two 400 mm diameter district heating pipelines which are now protected by an emergency...
ISA announces Call for Abstracts for 2017 Water/Wastewater and Automatic Controls Symposium
Abstracts should include a 250-word proposal outlining the topic to be presented. Prospective authors have the choice of presenting a 30-minute...