Pepperl+Fuchs introduces intrinsically safe operator panels for use in hazardous locations
TERMEX is well suited for fixed or mobile use in oil and gas applications. The system displays key Gravity Tool Interface, Inclination and Azimuth information from data acquisition systems for operator well logging and measurement. TERMEX Pro graphical interface software makes simple all control, display and visualization projects. C programming tools are optional.
TERMEX supports all of the most popular communication protocols, including Profibus-DP and Modbus. Traditional panel operation is also possible with a connection to a host computer using an ASCII protocol. These machine level interfaces are typically connected to a PLC.
Pepperl+Fuchs is a world leader in the design, manufacture and application of high quality process automation products and services. Pepperl+Fuchs is the number one provider of hazardous area technology from intrinsic safety to purge and pressurization, on-line corrosion monitoring and Fieldbus.
American Control Electronics announces DCH403-10 motor control
The DCH403-10 combines a custom regen-capable switching power supply with a low voltage drive to allow control over low voltage motors without the...
Zaber introduces GSM motorized goniometers
Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of...
Phoenix Contact introduces PT 2,5/S-QUATTRO terminal blocks
Up to four 12 AWG conductors can be connected in one feed-through terminal block. The terminal blocks feature Phoenix Contact’s push-in...
Mantracourt announces DSCUSB-PT potentiometer input module
This introduction to Mantracourt’s range of signal converters can be used with resistance based sensors to indicate position, rotation, angle and...
Micro-Epsilon's confocal chromatic controller
Providing a measuring rate of 70kHz, the confocalDT 2471 HS high speed controller is currently the worldwide fastest confocal chromatic controller....
Automation, Process Control & Instrumentation Pocket Guide
Engineers Pocket Guide from IDC Technologies covering Automation Using PLCs, SCADA and Telemetry Fundamentals, Process Control Fundamentals, and...
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Rotork actuators support environmental improvement at Aberthaw Power Station
Through the use of automation that includes Rotork valve actuation, Aberthaw can efficiently generate around 1555 MW of electricity for the...
MAVERICK uses DCSNext solution to move DCS migration project to final phase
DCSNext capabilities allow INEOS Styrolution to avoid any additional downtime during migration and leverage the complete benefits of the latest...
Dalian Metro uses Rockwell Automation to integrate system, cuts energy usage by 12%
The entire Dalian metro system includes more than 50 redundant Allen-Bradley MicroLogix and CompactLogix controllers with about 100,000 I/O points...