Phoenix Contact announces Quint UPS-IQ Industrial UPS
September 15, 2011 - The Quint UPS-IQ uses Phoenix Contact’s IQ technology to increase system availability. The rail-mounted uninterruptible power supply (UPS) monitors a scalable battery solution and provides the user with critical data.
The intelligent battery modules answer common reliability questions such as: Is the battery fully charged? How long will the battery backup last? Does the battery need replacement? Can the aging battery still supply the proper amount of energy?
The IQ technology manages the battery status and displays all of the relevant data on the UPS’s front panel, or transmits it to a computer. As a result, the user always knows the charge state, remaining buffer time and expected lifetime.
For 24 V loads, the Quint UPS-IQ has output currents of 5, 10, 20, and 40 A. The AC version has an output power of 500 VA.
Other system features include alarm contacts, PC shutdown and re-start, triggering e-mails and event-logging. The entire system, including the battery modules, is UL 508 and 1778 Listed.
About Phoenix Contact
Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment for a wide range of industries. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 47 international subsidiaries, including Phoenix Contact USA in Middletown, Pa.
American Control Electronics announces DCH403-10 motor control
The DCH403-10 combines a custom regen-capable switching power supply with a low voltage drive to allow control over low voltage motors without the...
Zaber introduces GSM motorized goniometers
Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of...
Phoenix Contact introduces PT 2,5/S-QUATTRO terminal blocks
Up to four 12 AWG conductors can be connected in one feed-through terminal block. The terminal blocks feature Phoenix Contact’s push-in...
Mantracourt announces DSCUSB-PT potentiometer input module
This introduction to Mantracourt’s range of signal converters can be used with resistance based sensors to indicate position, rotation, angle and...
Micro-Epsilon's confocal chromatic controller
Providing a measuring rate of 70kHz, the confocalDT 2471 HS high speed controller is currently the worldwide fastest confocal chromatic controller....
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Dalian Metro uses Rockwell Automation to integrate system, cuts energy usage by 12%
The entire Dalian metro system includes more than 50 redundant Allen-Bradley MicroLogix and CompactLogix controllers with about 100,000 I/O points...
MicroPower Direct releases glossary of power conversion terms
MicroPower Direct's free power conversion glossary contains 19 pages and 800 definitions of terms associated with a range of power technologies and...
NEMA publishes NEMA ABP 1-2016 Selective Coordination of Low-Voltage Circuit Breakers
The purpose of this paper is to provide guidance to engineers regarding the National Electrical Code (NEC) requirements for selective coordination.
Emerson Industrial's Unidrive AC delivers power for German textile company
Freudenberg needed to replace an AC drive within their nonwoven production facility in Kaiserslautern, Germany. The need for a small footprint...