Phoenix Contact announces Triple-level UT 2.5-3L terminal blocks
November 2, 2011 - Phoenix Contact announces Triple-level UT 2.5-3L terminal blocks. The UT 2.5-3L accepts solid, stranded or ferruled wires with 26-12 AWG.
Push-in bridging on each level saves space while distributing power. Ver-tical bridges electrically connect all three levels to one another. Each terminal point has a large labeling space for easy identification.
The UT 2.5-3L series features Phoenix Contact’s Reakdyne screw-clamp design to prevent screws from backing out. Components are manufac-tured from corrosion-resistant copper alloy. This robust design makes the terminal blocks ideal for mission-critical applications. The UT line of terminal blocks is widely found in energy, oil and gas, water treatment, machine building and other industrial automation systems.
UT 2.5-3L terminals have current ratings of 300 V at 20 A or 600 V at 5 A under UL file # E60425. These limited ratings are applicable for use in or with industrial control equipment where the load on any single circuit does not exceed 15 A at 51-150V; 10 A at 151-300V; or 5 A at 301-600 V, or the maximum ampere rating, whichever is less.
The series is part of Phoenix Contact's CLIPLINE Complete system, which features standardized push-in bridging, marking and testing acces-sories for all connection technologies.
About Phoenix Contact
Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment for a wide range of industries. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 47 international subsid-iaries, including Phoenix Contact USA in Middletown, Pa.
Electro-Chemical Devices introduces the X80 transmitter and S88 measurement sensor
With 316 stainless steel housing and sealed display, the X80 Transmitter and the S88 Sensors are designed to eliminate the need to inventory...
Applied Motion announces STAC6-Q-H stepper drive for hazardous locations
The STAC6-Q-H stepper drive is ATEX and IECEx certified for Class I, Zone 2 locations, and UL certified for Class 1, Div 2, Group C & D locations.
GE Digital announces Brilliant Manufacturing Module for WIP Manager
This module, enabled by Predix, GE’s operating system for the Industrial Internet, works with existing systems to provide true visibility into...
Microchip introduces DSC 6000 MEMS oscillators
The DSC6000 MEMS oscillators are solutions for use as clock references in small, battery-powered devices such as wearables and Internet of Things...
Danfoss announces VACON 20 AC drive
The drive’s size and power range, combined with PLC functionality, makes the VACON 20 a solution for packaging machine applications.
NEMA releases revised version of NEMA MG 1 Motors and Generators guide
NEMA MG 1 addresses new U.S. Department of Energy (DOE) regulations that require motor manufacturers to comply with efficiency targets. The new...
ABB announces NKT Cables acquisition of ABB's cable system business
NKT Cables is acquiring ABB’s global high-voltage cable system business with a total value of 836 million euros (US$934 million). The business is...
Stahlin's enclosures provide protection for ECS compost temperature sensors
Engineered Composted Systems needed a strong corrosive resistant NEMA 4X enclosure that could survive this environment and protect their RF...
Spartan Controls announces partnership with Atrex Energy
Accessibility to power in remote areas is essential to many functions that are crucial to customer operations, and extending the grid is often not...
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...