Phoenix Contact EC-E circuit breakers protect 24 Vdc circuits
Rated for both hazardous and non-hazardous environments, the EC-E has a current limitation of 1.3 to 1.8 times the rated current of the circuit protector. It is possible to switch on capacitive loads of up to 20,000 µF. The circuit breaker is disconnected only when an overload or short circuit occurs. The operator can turn the EC-E on or off manually using the integrated slide switch, or remotely reset the breaker via an input signal.
The EC-E series comes in three versions. The EC-E1 has an N/O signal contact; the EC-E4 has an N/C signal contact; and the EC-E has reset capability and status output. All have LED indication and are rated for current ranges from 0.5 A through 12 A.
The EC-E circuit breaker is rail-mountable and measures just 12.5 mm wide, making it one of the smallest designs with Class 1, Division 2 approval.
Phoenix Contact is a world leader in electrical connection, electronic interface and industrial automation technologies. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 46 international subsidiaries, including Phoenix Contact USA in Middletown, Pa. Global sales exceed more than1 billion euro annually. Phoenix Contact's formal Integrated Management System is registered to ISO quality, environmental and safety standards (ISO 9001:2008,14001:2004 and 18001:2007).
MMP announces Model MMP LA3-12V-5-A-SP-100 linear actuator
This design from MMP utilizes an ‘All-Steel” drive pinion, thereby increasing the force capacity, while maintaining the 5:1 Reduction Ratio...
Binder introduces M12 connector cord sets
The M12 cordsets are ideally suited for the food and beverage, pharmaceutical and chemical industries where a washable connector is required.
PAC announces the ISL FZP 5G2S OptiFZP freezing point analyzer
The OptiFZP is designed to offer productivity with reliability and accuracy with an interface on a 7” color touch-screen allows users to start a...
C3D Labs announces launch of C3D Vision 2016
This software component from C3D Labs works with polygonal 3D models. Scenes are split into segments and then represented by graphics. Each segment...
Schaefer introduces C/B 3500 series of DC-DC, AC-DC converter modules
The C/B 3500 Series provides a solution for the most extreme environments including military, transportation, alternative energy, and process...
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Dalian Metro uses Rockwell Automation to integrate system, cuts energy usage by 12%
The entire Dalian metro system includes more than 50 redundant Allen-Bradley MicroLogix and CompactLogix controllers with about 100,000 I/O points...
MicroPower Direct releases glossary of power conversion terms
MicroPower Direct's free power conversion glossary contains 19 pages and 800 definitions of terms associated with a range of power technologies and...
NEMA publishes NEMA ABP 1-2016 Selective Coordination of Low-Voltage Circuit Breakers
The purpose of this paper is to provide guidance to engineers regarding the National Electrical Code (NEC) requirements for selective coordination.
Emerson Industrial's Unidrive AC delivers power for German textile company
Freudenberg needed to replace an AC drive within their nonwoven production facility in Kaiserslautern, Germany. The need for a small footprint...