Phoenix Contact introduces PSR-FSP process safety relay
The process safety relay meets the requirements of fail-safe control. The PSR-FSP is compatible with “test pulses” that occur on safe PLC/DCS outputs. Inrush requirement is limited for safe PLC/DCS output compatibility, and it has a built-in fuse for the safe output contact.
This SIL-rated relay is just 17.5 mm wide. It features a normally open (NO) redundant safety output and a normally closed status contact that can be externally connected. The maximum switched current of the NO contact is 5 A. The device also has an externally accessible 5 x 20 mm standard fuse to protect the load contact. Pluggable and coded screw or spring-cage terminals simplify the wiring.
About Phoenix Contact
Phoenix Contact is a leading developer of industrial electrical and electronic technology. The company's diverse product range includes components and system solutions for industrial and device connection, automation, electronic interface and surge protection. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 47 international subsidiaries, including Phoenix Contact USA in Middletown, Pa. Phoenix Contact’s formal Integrated Management System is registered to ISO quality, environmental and safety standards (ISO 9001:2008, 14001:2004 and 18001:2007).
American Control Electronics announces DCH403-10 motor control
The DCH403-10 combines a custom regen-capable switching power supply with a low voltage drive to allow control over low voltage motors without the...
Zaber introduces GSM motorized goniometers
Designed to interface with Zaber’s X-MCB1 and X-MCB2 controllers, this device is available in two stackable sizes with 40 and 60 mm centre of...
Phoenix Contact introduces PT 2,5/S-QUATTRO terminal blocks
Up to four 12 AWG conductors can be connected in one feed-through terminal block. The terminal blocks feature Phoenix Contact’s push-in...
Mantracourt announces DSCUSB-PT potentiometer input module
This introduction to Mantracourt’s range of signal converters can be used with resistance based sensors to indicate position, rotation, angle and...
Micro-Epsilon's confocal chromatic controller
Providing a measuring rate of 70kHz, the confocalDT 2471 HS high speed controller is currently the worldwide fastest confocal chromatic controller....
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Rotork actuators support environmental improvement at Aberthaw Power Station
Through the use of automation that includes Rotork valve actuation, Aberthaw can efficiently generate around 1555 MW of electricity for the...
Dalian Metro uses Rockwell Automation to integrate system, cuts energy usage by 12%
The entire Dalian metro system includes more than 50 redundant Allen-Bradley MicroLogix and CompactLogix controllers with about 100,000 I/O points...
MicroPower Direct releases glossary of power conversion terms
MicroPower Direct's free power conversion glossary contains 19 pages and 800 definitions of terms associated with a range of power technologies and...
Emerson Global Users Exchange 2016
The Emerson Global Users Exchange is more than an industry-leading technical conference…it is a community of manufacturing leaders committed to...