Phoenix Contact terminal blocks provide safe disconnect in CT testing
Designed for use in such industries as power generation, utilities and semiconductor manufacturing, the ME terminals can be used wherever high currents must be reduced using current transformers, and where high voltages are reduced with voltage transducers. To accomplish the safe disconnect, the operator places switchable ME test disconnect terminal blocks before the meter for measurement and maintenance.
Each terminal block has a set of three bridging channels on either side of the disconnect lever. The new pluggable shorting component can lock into one of the bridging channels. Even with the shorting component installed, two bridging channels remain available for use.
ME test disconnect terminal blocks, ground and feed-through terminal blocks have the same pitch and profile. All are available with screw, spring-cage and push-in connection technologies. The ME series is part of Phoenix Contact's CLIPLINE Complete system, which features standardized push-in bridging, marking and testing accessories for all connection technologies.
Phoenix Contact is a world leader in electrical connection, electronic interface and industrial automation technologies. Phoenix Contact GmbH & Co. KG, Blomberg, Germany, operates 46 international subsidiaries, including Phoenix Contact USA in Middletown, Pa. Global sales exceed more than1 billion euro annually. Phoenix Contact's formal Integrated Management System is registered to ISO quality, environmental and safety standards (ISO 9001:2008,14001:2004 and 18001:2007).
Comau introduces Racer5-0.63 & Racer5-0.80 industrial robots
Racer5-0.63 and Racer5-0.80 are both controlled by the R1C 19" rack-mounted controller, which can be integrated into a single cabinet to control an...
Knick introduces P50000 line of transducers
The ProLine P50000 series from Knick was specially developed for voltage and current measurement in main and auxiliary power circuits of...
FLIR releases upgraded A35/A65 temperature sensors
Designed for process control and quality assurance, the cameras are available with 10 field-of-view options, from 8 degrees up to 90 degrees, to...
Pentek introduces FlexorSet models 5973-313 & 7070-313
Each FlexorSet is a multichannel data converter sub-system with programmable analog I/O signal interface suitable for connection to HF or IF ports...
Balluff introduces IP69K rated series of beam sensors
These stainless steel fork sensors are available in 50mm and 80mm widths and are designed for the food and beverage, packaging, metalworking and...
Sensor Concepts chooses Acromag's XCOM-6400 for InfiniSCAN measurement systems
Although the original intent was to use the power management system to reduce processor throughput and keep the board operating under 20 watts per...
Dalian Metro uses Rockwell Automation to integrate system, cuts energy usage by 12%
The entire Dalian metro system includes more than 50 redundant Allen-Bradley MicroLogix and CompactLogix controllers with about 100,000 I/O points...
MicroPower Direct releases glossary of power conversion terms
MicroPower Direct's free power conversion glossary contains 19 pages and 800 definitions of terms associated with a range of power technologies and...
NEMA publishes NEMA ABP 1-2016 Selective Coordination of Low-Voltage Circuit Breakers
The purpose of this paper is to provide guidance to engineers regarding the National Electrical Code (NEC) requirements for selective coordination.
Emerson Industrial's Unidrive AC delivers power for German textile company
Freudenberg needed to replace an AC drive within their nonwoven production facility in Kaiserslautern, Germany. The need for a small footprint...