Back to:

Automation Portals

Sensors - Encoders, Resolvers & Speed Monitors

Product Showcase: Sensors - Encoders, Resolvers & Speed Monitors

Find Encoders, Resolvers & Speed Monitors Sensors offered by various suppliers and manufacturers for the factory automation and process control industry.

		TR Electronic Introduces CEx58 Encoders with EtherNet/IP - 04/30/12 CEx58 Series features an integrated switch in a compact housing, a modular construction for mechanical customizations and parameter configurations via the network.

		HEIDENHAIN introduces LC 115 and 415 Linear Encoders - 04/01/12 Double sealing lips on the encoders protect against contamination, and extrusions ensure high vibration resistance.

		Posital announces Magnetocode magnetic rotary encoder - 02/29/12 Magnetocode encoders with analog output are an alternative to potentiometers in systems that use analog instrumentation to measure and control rotary motion.

		RSF releases MSA 700 and 800 linear encoders - 02/28/12 MSA 700 and 800 series sealed incremental linear encoders have grating pitches of 20, 10, and 8 microns, and come in accuracies of 2, 3 and 5 microns.

		Leine & Linde announces 700 series rotary encoders - 02/16/12 Encoders can be mounted directly on a motor's shaft without an intermediate adapter for shaft reduction.

		NUMERIK JENA introduces non-magnetic LIK encoders - 02/01/12 The encoders can withstand a high magnetic environment without loss of accuracy or resolution and are mechanically stable.

		Posital adds DeviceNet and EtherNet/IP to rotary encoders - 12/20/11 OPTOCODE absolute rotary encoders can be readily integrated into control systems based on Rockwell Automation/Allen-Bradley and Schneider PLCs.

		BEI Releases HS52 Explosion Proof Hollow Shaft Encoder - 10/02/11 HS52 operates in Division 1 and Zone 1 environments where ignitable concentrations of flammable gases, vapors or liquids are likely to exist under normal operating conditions.

		SICK announces DDS36 and DDS50 incremental encoders - 08/31/11 The DDS series of encoders can be used in light duty applications that require reliable speed feedback with pulses per revolution between 100 and 2,500.

		NK introduces ATQ Frequency Output Current Transducers - 08/02/11 ATQ series is used as an input to high speed counter or frequency PLC modules, panel meters or programmable relays, to monitor machine current usage.

		Servo2Go releases Low-Ripple Tachometer Series - 08/02/11 Low-Ripple Series supports a variety of high-output voltage instrument-grade velocity sensing applications such as those encountered with precision integrators and velocity servo systems.

		AMCI adds networking to Rotary Encoders - 07/31/11 Rotary sensors are available for EtherNet/IP, Modbus TCP/IP, Profibus, or DeviceNet communication.

		Novotechnik introduces Vert-X 22E rotary sensors - 07/27/11 Sensors use a magnetic pickup that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system.

		HEIDENHAIN enhances its ROC/ROQ 400 PROFIBUS rotary encoders - 07/26/11 The rotary encoders with PROFIBUS interface now support the DP-V2 encoder profile for robot control and production technology.

		POSITAL adds SSI interface to OPTOCODE rotary encoders - 06/30/11 The interface reports absolute rotary position data using the synchronous serial interface (SSI) standard, operating over an RS-422/485 communication link.

		POSITAL enhances OPTOCODE encoders - 06/01/11 Enhancements include support of additional output drivers for incremental signals (RS422/TTL and Push-Pull/HTL), and a resolution of 1,024, 2,048, 4,096, 8,192 or 16,384 PPR per output.

		AMCI adds Modbus TCP/IP to NR25 Encoders - 05/24/11 NR25 Modbus-TCP encoders are compatible with Schneider Modicon PLCs that support Modbus-TCP.

		FSG announces MH4096-PB/CAN-1023 heavy duty encoders - 03/17/11 The devices register the rotation angle and speed with a maximum resolution of 12 bits over 360°, and can cover up to 4,096 revolutions in multi-turn mode.

		HEIDENHAIN introduces 1023 and 1123 rotary encoders - 01/18/11 Low profile incremental rotary encoders with block commutation tracks are especially suitable for use in small-dimensioned servo motors.

		FRABA announces OPTIPACT motion sensors - 11/21/10 OPTIPACT sensors can measure velocities as high as 4 m/sec (13 fps) in two directions (X and Y) with a measurement error of less than 1% and excellent dynamic response.

		Siemens announces Sitrans WS300 speed sensor - 10/10/10 Sitrans WS300 can be directly coupled to a rotating tail or bend pulley shaft, ensuring accurate belt-travel readout and eliminating problems caused by belt slippage or material build-up.

		AMCI enhances Size 11 Resolvers - 09/30/10 Enhancements include radiation hardened, submersible, and gearhead units.

		TURCK enhances hollow shaft miniature encoders - 09/07/10 2430 shaft and 2440 hollow shaft miniature encoders are now available in absolute versions.

		FRABA adds fieldbus to OPTOCODE encoders - 08/18/10 OPTOCODE encoders now have interfaces for EtherNet/IP and PROFINET IRT networks.

		AMCI toughens DuraCoder Rotary Encoders - 07/31/10 DuraCoder encoders are now available with stainless steel housings and an IP69K rating for operation in the most extreme conditions.

		TURCK introduces incremental magnetic encoders - 07/22/10 TURCK 2430 shaft and 2440 hollow shaft encoders have a temperature range of -20 to 85°C, and a maximum speed rating of 12,000 RPM.

		Dynapar enhances HSD35 Mill-Duty Encoder - 07/20/10 Enhancements to the HSD35 include 400g shock rating, 100C temperature limit, and better sealing.

		ASM Sensors releases Encoder Magnetic Rings - 07/11/10 Encoder rings are available in three sizes for different shaft sizes and yield up to 184,320 pulses per revolution.

		Contrex announces extended temperature range Gear Tooth Encoder - 06/29/10 Gear Tooth Encoders can operate in severe environments delivering as high as 40KHz, 50% duty cycle edges, in Quadrature or 2X modes.

		Advanced Micro Controls releases NR25 EtherNet/IP resolvers - 06/24/10 NR25 EtherNet/IP resolver comes standard with Power over Ethernet (PoE), making it possible to install this resolver using a single Ethernet cable that transmits data and power.

Automation.com Real-time Information for the Automation Professional May. 25, 2012

Cart

Automation.com

NOTICE: Your use of Automation.com constitutes your agreement to the Legal Notices, Policies, Terms, and Conditions governing its use. You should review these terms before proceeding.Copyright © 2000-2010 Automation.com - automation.com, automationtechies.com, automationtechies, automationtechie, and Member-Match are all trade and service marks of Automation Resources, Inc. All Rights Reserved.