Sealevel adds two SeaLINK USB to serial adapters
Offering designers the choice of one or two serial ports, SeaLINK serial devices are the perfect way to connect peripherals such as barcode scanners, serial displays, and data acquisition modules to any USB port. Each DB9M serial port is configurable for RS-232, RS-422, or RS-485 via dip switches accessible through the case, and optical isolation protects the host computer from damaging voltage surges and ground loops commonly found in industrial and OEM applications. For maximum reliability, each adapter includes Sealevels patent-pending SeaLATCH locking USB connector design that prevents accidental cable disconnection.
Installation and setup is easy. Simply install the included software and then connect the serial adapter to your USB port. SeaLINK serial ports appear as standard COM ports to the host system enabling compatibility with legacy software. SeaLINK serial adapters are USB bus powered eliminating the need for external power supplies. Status LEDs display transmit and receive activity, and SeaLINK serial adapters support data rates to 921.6K bps.
For convenient mounting, SeaLINK serial adapters include a removable plastic clip that snaps onto 35mm DIN rail. The clip can also be attached with screws to a wall, under a counter, or to any other flat surface.
Standard SeaLINK adapters operate between 0°C to 70°C and designers can special-order extended temperature (-40°C to +85°C) adapters. Both adapters are available now and prices start at $139.
Sealevel Systems, founded in 1986, provides industrial computing solutions in addition to a variety of communications and I/O products including PCI Bus cards, Ethernet serial servers, USB serial adapters, PCMCIA cards, and PC/104 modules. Sealevels product line includes multi-port RS-232, RS-422/485, RS-232/422/485 multi-interface high-speed sync/async, and digital/relay I/O.
Bel Power Solutions releases LD series of DIN rail switching power supplies
The Bel Power Solutions line of DIN Rail Power Supplies have been designed for use in many industrial applications, including automation, process...
Pentek introduces Model 71131 Jade XMC module
The Model 71131 is suitable for connection to HF or IF ports of a communications or radar system. Its built-in data capture feature offers a...
EVT announces EyeVision 3D software for EyeScan 3D sensor series
This version contains the commands of the Basic version and a 3D command set for evaluating and measuring on 3D point clouds.
Pickering announces 40-614 family of PXI Multiplexers
This range of High-Density 2 Amp PXI Multiplexers was designed for signal routing in Automatic Test Equipment (ATE) and data acquisition systems.
PanaTeQ introduces VPX3-ZU1 single board computer
In the device, the Zynq UltraScale+ integrates a Quad-core 1.5GHz 32/64-bit ARM Cortex-A53 based Application Processing Unit (APU), a Dual-core ARM...
R&S PACE 2 – the Deep Packet Inspection (DPI) engine by Rohde & Schwarz Cybersecurity – now enables Infotecs’ ViPNet xFirewall to inspect web...
Wireless Switches & Sensors - New Control Possibilities
By Steute USA
Clearly, wireless technology has been widely accepted and embraced in the industrial community. This has resulted in the development...
Moxa announces Turbo Pack 3 firmware upgrade for industrial Ethernet switches
This firmware is compliant with the IEC 62443-4-2 level 2 cybersecurity standard, and also supports other security management features, such as...
HARTING announces partnership with Heilind Electronics
HARTING will provide Heilind’s customers with its connectivity solutions. Heilind will, in turn, increase HARTING’s growth through their online...
Red Lion earns 'Leadership in Automation' award
Red Lion earned the award for the sixth consecutive year, in part due to its HMI hardware and wireless networking components