Servo2go introduces DMC-1417 Econo Motion Controller
October 23, 2011 - Servo2go introduces DMC-1417 Econo Motion Controller. The DMC-1417 can handle the most demanding applications with such features as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo motor control. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and e-cam.
Programming the DMC-1417 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. The Econo Series controllers do not include uncommitted analog inputs and are not optoisolated. Use the DMC-1810 Optima controller if you require these features.
- Accepts up to 8 MHz encoder frequencies for servos and 2 MHz for steppers
- Advanced PID compensation with Velocity and Acceleration feed forward and integration limits
- Modes of motion include jogging, point-to-point positioning, contouring, electronic gearing and ECAM
- Multitasking for concurrent execution of two application programs
- Memory for application programs, variables and arrays
- Accepts inputs from two encoders for gearing or dual-loop applications
- 7 Uncommitted digital inputs, 3 digital outputs
- High Speed position capture • Forward and reverse limits and home input
- Sinusoidal commutation for brushless servo motors
- 37-Pin D-type connector
- Custom hardware and firmware options available
Adcole introduces the Adcole 1302 Dual Head Camshaft Gage
The Adcole 1302 Dual Head Camshaft Gage features two independent opposed Heidenhain side wall measuring heads with ±10 mm travel for measuring...
Sciemetric Instruments releases Model 3675 leak test station
The 3675 can combine up to three of Sciemetric’s 3520 Series Leak Test units in one stand, controlled by a single sigPOD controller.
Fluke announces addition of four pyrometers to Endurance series
Application areas include primary and secondary metals manufacturing, carbon processing, silicon production, and now also foundries and welding,...
Crouzet introduces BDE PRO external motor drive
This analog controller is suitable for use in a variety of markets including medical, access control, commercial and industrial applications, and...
PI introduces V-551, V-552 motor stages & C-891 motion controller to PIMag series
The stages are equipped with incremental and absolute-type linear encoders for direct position measurement and ironless 3-phase motors and...
Gilman Precision announces Donald Hunkel as new application engineer
In his current role, Don’s objective is to assist customers in overcoming engineering challenges and produce customized products that achieve the...
TT Electronics announces participation in NASA mission to Mars
The Mars 2020 Rover will carry an entirely new subsystem to collect and prepare Martian rocks and soil samples. This subsystem will include a...
ESA Automation announces acquisition of Selema.
The recent acquisition represents a step ahead towards the accomplishment of a complete supply chain for the world of industrial automation
Fluke announces Motor and Drive Troubleshooting course
The Fluke Motor and Drive Troubleshooting Course delivers critical knowledge so maintenance professionals can gain the practical diagnostic skills...
Hannover Messe 2017
HANNOVER MESSE covers a wider range of themes and exhibits than any other event – R&D, industrial automation and IT, industrial supply,...