Back to:

Programmable Controllers e-Newsletter Archive

Automation Portals

Programmable Controllers (PLC & PAC) Portal

Product Announcements

		Deltalogic enhances Accon-NetLink adapters - 05/23/12 The Profibus adapter now supports Siemens Simatic S7-300 and S7-400 PLCs.

		Siemens announces Simatic Converting Toolbox - 05/14/12 Simatic Converting Toolbox module is a PLC-based control solution used in applications with a PLC as the central control system in which process controls are implemented.

		CimQuest updates INGEAR NET.LOGIX device communications software - 05/07/12 NET.LOGIX 4.0 communicates directly to Allen-Bradley ControlLogix, CompactLogix and SoftLogix programmable automation controllers via an Ethernet communication channel.

		EPLAN Electric P8: the leader in electrical design automation Automation and standardization are the future of electrical engineering. The EPLAN Electric P8 CAE automates the engineer’s most time-consuming project tasks like wire-numbering, device-tagging, cross-referencing, error-checking and much more. You can accomplish in a day what takes a week or more using a CAD or legacy CAE. Request a Free Trial CD

		ISaGRAF releases version 6.1 - 04/22/12 Enhancements in version 6.1 include a workbench, version 5.3 of the C5 firmware based on Microsoft Visual Studio 2010, and an IEC 61499 editor.


		SEL enhances SEL-2240 Axion PLC - 03/28/12 Additions to SEL-2240 Axion PLC include low-voltage power supplies, four-slot backplanes, dual four-slot backplanes, and IEC 61850 GOOSE.

		Opto 22 upgrades PAC Project software - 03/28/12 Enhancements in PAC Project 9.2 include support for SNAP-SCM-CAN2B CAN module, SNAP-IDC-32D digital input module, and mechanical relay output module.

		Artila releases PAC-4070 DIN rail programmable automation controller - 03/22/12 PAC-4070 is powered by 400MHz AT91SAM9G20 ARM9 Processor with memory management unit, and equipped with 64MB SDRAM, 128MB NAND Flash, and 2MB DATAFlash.

		Optex FA Sensors releases UQ1 control unit - 03/20/12 UQ1 provides automatic communications between Optex Displacement Laser Sensors and Mitsubishi Q Series PLCs.

		Rockwell Automation introduces CompactLogix 5370 PACs - 03/15/12 5370 series of programmable automation controllers feature up to 16 axes of motion control, EtherNet/IP communications, and up to 3MB of memory.

		Siemens adds CM1243-2 AS-i master to Simatic s7-1200 - 03/12/12 AS-i master CM1243-2 communication module enables field sensors and actuators to be connected via AS-Interface to the Simatic S7-1200 controller.

		Kepware releases KEPServerEX 5.8 software - 02/21/12 Enahncements in KEPServerEX 5.8 include an Allen-Bradley ControlLogix Unsolicited Driver, and improvements to more fully integrate with Fisher ROC and ROC Plus Controllers.

		Software Toolbox releases TOP Server 5.8 Connectivity Software - 02/21/12 TOP Server 5.8 now has 24 new drivers, including ControlLogix Slave Ethernet driver and ControlLogix firmware up through Revision 20.

		Yokogawa announces Vitessen CPUs for FA-M3 PLCs - 02/09/12 Vitessen CPUs for FA-M3 PLCs provide scan speeds that can execute 100,000 program steps in 1 msec.

		SoftPLC announces Allen-Bradley PLC Migration Kits - 01/30/12 With these Migration Kits, users can upgrade an Allen-Bradley PLC CPU without re-programming or re-wiring.

		Maple Systems Introduces HMC Combination HMI and PLC - 01/24/12 HMC accepts up to five plug-in I/O modules with varying configurations of digital and analog inputs and outputs.

		KEP enhances Infilink HMI software for PLCs - 01/24/12 Infilink-HMI provides machine builders a software package that is quick to install and easy to configure under Windows 7 and XP operating systems.

		WAGO announces TeleControl PLC and PCs - 01/23/12 TeleControl PLC supports IEC 60870-5-101 (serial transmission), IEC 60870-5-104 (TCP/IP-based communication) and IEC 61850 (substation protection/control).

		Rockwell Automation enhances RSLogix 5000 software - 01/17/12 Enhancements in v20 of RSLogix 5000 include support for GuardLogix 5572S and 5573S safety controllers, CompactLogix 5370 PACs, and EtherNet/IP.

		Softing introduces S5-TCP/IP-100 Ethernet Communications Module - 01/15/12 S5-TCP/IP-100 communications processor integrates any Siemens S5 PLC with TCP/IP and ISO (H1) networks and supports 10/100 Mbps speeds.

		eWON introduces COSY 141 industrial router for PLCs - 01/09/12 COSY 141 has 4 Ethernet ports to connect the machine locally, a WAN Ethernet port for connection to the internet, and a serial port for serial connection of PLCs.

		Unitronics introduces V200-18-E46B Snap-In I/O - 12/21/11 V200-18-E46B Snap-in module supports a total combination of 46 analog and digital inputs and outputs.

		Posital adds DeviceNet and EtherNet/IP to rotary encoders - 12/20/11 OPTOCODE absolute rotary encoders can be readily integrated into control systems based on Rockwell Automation/Allen-Bradley and Schneider PLCs.

		Aerotech announces A3200 MotionPAC - 12/09/11 A3200 combines a software-based Programmable Logic Controller (PLC) with a motion controller.

		AMCI adds Modbus TCP to its stepper indexer/drives - 12/05/11 The Modbus protocol extends the potential of SD31045E & SD17060E drives in PLC-controlled applications.

		Rockwell Automation enhances PlantPAx Process Automation System - 11/15/11 Users now can tie intelligent motor devices into PlantPAx, making an immediate and measurable impact on asset availability, operational efficiency and energy management.

		Rockwell Automation expands Integrated Architecture - 11/13/11 Enhancements for smaller applications include Allen-Bradley CompactLogix programmable automation controllers (PACs), servo drives, I/O, visualization and simplification tools.

		3S-Smart Software announces CoDeSys development system - 10/26/11 CoDeSys Professional Developer Edition is for application programmers who are familiar with high level language development tools.

		Rockwell Automation introduces ControlLogix 5570 Series PACs - 10/20/11 ControlLogix 5570 Series controllers are equipped with on-board display features that provide enhanced diagnostics and run-time information to help ease troubleshooting and increase uptime.

		Advantech announces WebOP-2000T Industrial Operator Panels - 10/20/11 Designed for harsh industrial environments, the NEMA4/IP66 WebOP-2000T industrial operator panels feature 128MB on board flash memory and micro-SD card slot.

		COPA-DATA announces WinCC-to-zenon Converter - 10/10/11 The WinCC-to-zenon converter lets Siemens WinCC automation software users easily switch to the zenon HMI/SCADA system.

		ICP DAS Introduces LP-5131 Linux Programmable Controller - 10/10/11 LP-5131 is equipped with a 520 HHz PXA270 CPU and runs Linux Kernel 2.6.19.

		Eplan releases Operational Sequence module - 10/10/11 Operational Sequence documents the functional timeline of a machine/plant by using convenient process descriptions.

		ISaGRAF releases version 6.0.3 - 10/04/11 Enhancements in 6.0.3 include a Sequential Function Chart (SFC) editor, and tools such as Device View, Description Windows and a Document Generator.

		Lenze Americas announces 3200 C L-force Controller - 10/04/11 3200 C Controller with EtherCAT integrates motion control, robotics and PLC within one central control system.

		Secomea adds remote access to SiteManager - 09/25/11 SiteManager now allows a service engineer to connect to PLCs and automation devices at remote sites via the Internet.

		Messung Systems announces NX7 PLC - 09/25/11 NX7 PLC, a combination of PC & PLC, has user defined web pages, fast I/O update, various fieldbus options including Profibus and Modbus, and hot swappable I/O modules.

		CimQuest releases Visual Studio Libraries for Siemens PLCs - 09/21/11 Users writing automation and control applications in Visual Basic.NET or Visual Studio C# can use INGEAR NET.S7LINK software to communicate easily with Siemens controllers.

		Dunkermotor Introduces STM Solar Tracker Motors - 09/12/11 STM controls up to 127 motors over a 5000 meter bus length with its CANopen interface and a single PLC with a solar tracking function block.

		ExperTune Offers free Upgrade to Rockwell’s tuning software - 08/28/11 ExperTune is offering a no-cost upgrade for existing users of Rockwell RSTune and RS Loop Optimizer.

		SEL announces SEL-2240 Axion modular RTU and PLC - 08/25/11 Axion is a high-density, highly configurable modular RTU and programmable logic controller (PLC) system with EtherCAT.

		GE adds Profinet to PACSystems - 08/09/11 PACSystems with PROFINET can operate in high-noise areas and cover large distances in real time with an elegant redundancy capability to maximize uptime.

		SoftPLC adds Interface to Allen-Bradley Remote I/O - 08/04/11 This interface provides connectivity to Allen-Bradley Remote I/O, such as 1771, 1747, SLC-500, Flex, and other compatible networks.

		Saelig announces MOACON programmable control system - 07/27/11 MOACON can support up to 256 ports, with 48 default digital I/O ports, 128 expandable digital input ports, and 80 expandable relay output ports. Price: from $274.00.

		Unitronics introduces V200-18-E62B Snap-in I/O Module - 07/11/11 V200-18-E62B Snap-in module supports a total combination of 62 analog and digital inputs and outputs.

		MDT updates AutoSave Change Management Software - 07/06/11 AutoSave 5.06 features include support for Windows 7 32-bit and Windows 2008 64-bit server.

		ICP DAS adds real time clock to TouchPad PLC - 06/20/11 TPD-280U now has a real time clock to schedule events like heating, cooling or lighting a room based on time.

		ISaGRAF releases ISaGRAF version 6.0.2 - 06/16/11 Version 6.0.2 includes User Interface localization in 8 languages: English, French, German, Italian, Japanese, Spanish, Simplified Chinese and Traditional Chinese.

		Unitronics introduces Vision1210 PLC - 06/15/11 Vision1210 PLC has a built-in 12.1-in. color-touchscreen HMI, USB programming port, recipe capabilities, and Micro SD card memory storage for data logging and back up.

		Red Lion announces driver for Omron safety controller - 06/15/11 Driver allows Red Lion's G3 Series HMIs, Data Station Plus and Modular Controller Series to monitor and control one or more Omron STI G9SPs.

		AMCI announces motion control modules for Allen-Bradley PLCs - 06/07/11 Solutions include a 2-axis plug-in module for 1769 CompactLogix I/O, and a 1-axis module for 1734 Point I/O.

		CimQuest INGEAR introduces NET.S7LINK software - 06/06/11 NET.S7LINK software communicates with Siemens S7 Ethernet family of programmable logic controllers (PLCs.)

		Rockwell Automation releases Micro800 micro programmable controllers - 06/02/11 Micro800 micro PLCs and Connected Components Workbench software are for machine builders and end users who need a cost-effective control solution for their small applications.

		Divelbiss announces HEC-1500-E-R Harsh Environment PLC - 06/02/11 The HEC-1500-E-R PLC works in temperatures of -40° to +80°C and has a sealed, water-tight enclosure with plug connections that is submersible to three feet.

		Rexroth releases IndraLogic XLC PLCs - 05/02/11 XLC functions include editor tools, object orientation as an extension to IEC 61131-3, comprehensive function libraries as well as fast compilers for efficient generation of machine codes.

		ProSoft Technology adds meter prover to Flow Computer - 04/27/11 Enhancements in version 2.07 of the Liquid and Gas Flow Computer include a meter proving feature that sends test results directly to the control processor and SCADA control system.

		HMS introduces Anybus X-gateway for Modbus TCP - 04/27/11 The gateway enables communication between Modbus TCP and PLC networks on Profibus, DeviceNet and EtherNet/IP.

		ISaGRAF releases version 6.0.1 - 04/11/11 This latest release bundles all available ISaGRAF 6 plug-ins and includes a series of training videos and tutorials.

		Eaton releases SmartWire-DT panel wiring solution - 03/31/11 The system reduces panel wiring complexity, improves system reliability, saves installation time and reduces panel space.

		B&R adds FDT/DTM to Automation Studio - 03/21/11 Automation Studio software now has a universal FDT container (Field Device Tool) for linking any Device Type Manager (DTM) using a plug-in interface.

		Yokogawa releases new modules for STARDOM Control System - 03/15/11 The new STARDOM modules include turbomachinery control, a frequency input module for wind turbine blades, and an upgraded CPU module for oil and gas upstream processes.

		Beckhoff releases IP 67 EtherCAT Box with Analog IO - 03/08/11 EP4374 I/O box is a flexible, moisture and dust-resistant EtherCAT I/O solution that combines two analog inputs and two analog outputs into one device.

		WAGO introduces JUMPFLEX Interface Adapter - 03/08/11 Interface Adapter provides JUMPFLEX signal conditioners and relays with a tool-free interface to the WAGO-I/O-SYSTEM or other PLC interfaces.

		Festo Introduces CPX-CEC CoDeSys Embedded Controller - 02/21/11 Current users of IEC 61131-3 can port over their existing code, libraries, function blocks, etc., reducing programming time.

		Yokogawa Electric announces FA-M3V PLC - 02/20/11 FA-M3V programmable logic controller is suited not only for the control of conventional discrete manufacturing processes, but also batch processes.

		Schneider Electric Announces Modicon M168 HVAC PLC - 02/01/11 The M168 controller works with small/medium chillers, roof top units, refrigeration racks, and air handling units.

		eWON releases Talk2M Pro remote access solution - 12/05/10 Talk2M Pro provides secure VPN on-demand access for any number of remote machines, PLCs, and devices, ranging from several units to several thousand.

		Unitronics releases Vision1040 PLC - 12/02/10 Vision1040 PLC comes with an integrated HMI, 20 auto-tuned PID loops, VisiLogic software, and TCP/IP Ethernet, cellular, and industrial protocols.

		AutomationDirect enhances CLICK micro brick PLCs - 11/30/10 Now available with standard CPU units, the PLCs feature eight discrete inputs and six discrete outputs, and a price of $99.

		Parker releases ACR9600 Xpress Programmable Automation Controller - 11/30/10 The Xpress PAC 9600 allows users to develop code in IEC 61131-3 programming languages.

		Siemens introduces TIA software engineering framework - 11/23/10 This single software framework will enable all Siemens Programmable Controllers, HMI operator panels and drives to be configured in the same development environment.

		ICP DAS enhances WISE PAC - 11/18/10 Enhancements in version 1.1 include a Calendar Interface, CGI commands for sending data to interact with surveillance systems, and Recipe functions.

		Molex announces Brad SST PB3 Profibus Module - 11/14/10 This stand-alone hardware platform includes PROFIBUS and Ethernet communication ports, enabling connectivity to any Rockwell ControlLogix and CompactLogix controller.

		Agile Planet Announces RLX PLC Robot Control software - 11/11/10 RLX software for robot control and motion planning runs on Programmable Logic and Automation Controllers (PLCs/PACs).

		ACKSYS introduces M340 wireless interface to Modicon CPU - 11/09/10 M340-WC can be configured as an Access Point, an Ethernet Bridge or a WDS repeater, in infrastructure and AD-HOC modes.

		Rockwell enhances PlantPAx Process Automation System - 11/01/10 Enhancements in Release 2.0 include features for high availability, device integration and asset management, design productivity, batch and sequencing control, and operations productivity.

		EPLAN updates Platform 2.0 - 10/28/10 Enhancements include active device protection, channel oriented PLC design, point wiring and improvements in graphic functions.

		ISaGRAF releases ISaVIEW plug-in - 10/27/10 The ISaVIEW plug-in provides ISaGRAF 6 workbench users with a simple yet powerful integrated HMI.

		Rockwell releases three programmable automation controllers (PACs) - 10/27/10 PACs include the Allen-Bradley Compact GuardLogix, CompactLogix L2 and CompactLogix L4 controllers.

		Rockwell Automation Expands PlantPAx Software - 10/20/10 Rockwell added 10 VMware Ready software products to its PlantPAx Process Automation System to help manufacturers leverage the benefits of virtualization.

		Invensys Announces Foxboro PAC System - 10/20/10 Foxboro PAC System offers control and information capabilities for installations with fewer than 3,000 input/output (I/O) points.

		Phoenix Contact introduces nLC-055 Nanoline controller - 10/19/10 The nLC-055 controller can add, subtract, multiply and divide, as well as perform modulo (percentage) operations.

		ISaGRAF releases version 6.0 - 10/14/10 Enhancements include the Microsoft Visual Studio Shell and plug-ins for a Ladder Diagram editor, Function Block Diagram editor, Structured Text editor, anda Tag Database editor.

		KW-Software adds AMR Cortex M3 to ProConOS PLC software - 10/04/10 The IEC 61131 PLC runtime system ProConOS embedded CLR is now available for Cortex-M3-based microcontrollers.

		Exele adds Alarm Analytics to TopView Software - 09/21/10 Alarm Analytics provides local and remote alarm history analysis through interactive tables and charts.

		CimQuest INGEAR updates Visual Studio .NET class libraries - 09/13/10 Enhancements provide an alternative to OPC-based driver software for for Allen-Bradley MicroLogix, SLC and PLC-5 families of programmable logic controllers.

		Calex announces Model 8505 analog to frequency converter - 09/02/10 Model 8505 converts a 4-20 mA sensor output into a PLC frequency input. Price: from $83.30

		GE Intelligent Platforms updates PACMotion motion controller software - 09/01/10 PACMotion 1.5 can now control up to 40 axes of synchronized motion at extremely fast loop rates, independent of the number of motion axes.

		ABB adds PLC to IRC5 robot controller - 08/26/10 Adding the AC500 PLC to the IRC5 robot controller eliminates the cost of a separate PLC cabinet and reduces the time associated with set-up and operation of robotic production cells.

		CimQuest updates .NET libraries for Logix controller family - 08/19/10 INGEAR NET.LOGIX software provides an alternative to OPC-based driver software for Visual Studio .NET developers.

		Rockwell Automation introduces PlantPAx Logix Batch software - 08/19/10 The application is based on ISA-88 standards and provides controller-based recipe management and control capability.

		Rockwell Automation releases ControlLogix L73 and L75 controllers - 08/12/10 ControlLogix L73 and L75 PACs interface seamlessly with motion drives through EtherNet/IP and SERCOS network interfaces.

		Maple Systems enhances EZware HMI software - 08/09/10 Enhancements include the ability to utilize tags with Allen-Bradley Controllers so they can be named with descriptive text.

		HMS adds CAN 2.0A Gateway to ET200S - 07/06/10 Typical applications include machines and automation systems where CAN or CANopen enabled devices are used in combination with Siemens PLCs.

		GE Intelligent Platforms announces PACSystem RX3i CPU315 - 06/30/10 RX3i CPU315 has an Intel M class 1Ghz processor and 20Mbytes of user memory, making it able to address requirements for high speed processing and large data storage.

		Advantech introduces WOP-2000 HMI for PLCs - 06/15/10 WOP-2000 is compatible with 250 PLCs including Allen Bradley, Modicon, GE, Siemens, Mitsubishi, Omron and Yaskawa.

		Pepperl+Fuchs updates scanners for Allen-Bradley PLCs - 06/13/10 AS-Interface Scanners and Gateways for Allen-Bradley PLCs now satisfy all aspects of AS-Interface specification 3.0.

		NI announces Profibus, FF and DeviceNet interfaces - 06/13/10 Interfaces connect LabVIEW, PACs, DCSes and embedded systems to Profibus, Foundation Fieldbus and DeviceNet industrial networks.

		Rockwell Automation Expands FactoryTalk Batch Capabilities - 06/07/10 Enhancements include intelligent recipe capabilities, secure operator overrides, expanded data collection and reporting, and improved material management capabilities.

		ABB enhances Freelance hybrid control system - 05/30/10 Enhancements includes OPC interfaces that provide expanded access to system information, including alarms and events.

		IRAI announces Virtual Universe 3D process simulation software - 05/09/10 Using the latest technologies for video game 3D rendering, physics engine and 3D sounds, Virtual Universe allows the creation of realistic simulations.

		Online Development introduces cATM-BLY90 to migrate Bailey DCS to FactoryTalk - 05/05/10 The module installs in the ControlLogix chassis and features a GUI (Graphical User Interface) to simplify the exchange of data between the DCS and the ControlLogix PAC.

		Phoenix Contact adds GSM modem to Nanoline controller - 05/04/10 Nanoline controller can now provide easy control capability via text message from virtually anywhere in the world.

		IDEC announces Automation Organizer PLC software - 05/03/10 Automation Organizer (AO) software suite combines PLC (WindLDR) and OI (WindO/I-NV2) software with system configuration software (WindCFG).

		KW-Software enhances ProConOS PLC OS - 04/28/10 ProConOS PC-based programmable controller operating system now uses INtime for Windows real-time operating system (RTOS) by TenAsys.

		3S-Smart Software Solutions enhances CoDeSys - 04/27/10 CoDeSys 3.4 enhancements include FDT integration extending the standard configuration by device-specific dialogs from DTMs, and full 3D functionality in CoDeSys SoftMotion.

		CimQuest INGEAR adds Windows 7 to ActiveX Studio PLC software - 04/12/10 Allen-Bradley ActiveX Studio software now supports creation of Windows 7 PLC HMI applications and enables 32-bit programs to operate with 64-bit versions of Windows.

		MatrikonOPC adds FINS to Omron OPC server - 04/06/10 MatrikonOPC announces support for FINS communication protocol in the OPC Server for OMRON.

		AMCI releases 7160 Series SSI module for MicroLogix I/O - 03/30/10 7160 Series adds the ability to monitor rotary and linear applications to Allen-Bradley 1762 MicroLogix I/O.

		MatrikonOPC announces OPC server for Mitsubishi PLCs - 03/30/10 For integrating with HMI, historians, ERP and MES, the server offers direct access to Mitsubishi A, FX Series and Q series PLCs.

		Rockwell Software enhances RSLogix 5000 programming package - 03/15/10 Enhancements include integrated motion on EtherNet/IP, high-integrity add-on instructions, and one-to-one transmission of EtherNet/IP I/O data.

		mikroElektronika announces PICPLC4 PLC - 03/14/10 PICPLC4 v6 PLC includes four relay outputs, GSM/GPRS communication and Ethernet. Price: $99.

		EPSON introduces G1 Mini SCARA robots - 03/11/10 G1 Mini SCARA robots are available in arm reaches of 175 or 225mm.

		mikroElektronika announces PICPLC16 v6 PLC - 03/10/10 PICPLC16 v6 PLC has GSM/GPRS communication, Serial Ethernet, and is priced at $159.

		ABB announces AC500-eCo PLC - 03/08/10 AC500-eCo PLC comes with a comprehensive range of communication options, including Modbus master/slave or CS31.

		eWON introduces Talk2M Go remote maintenance platform - 03/07/10 Talk2M Go enables up to three users to access one or several machines at the same time, with fully detailed connection reports itemized by machine available every month

		Divelbiss announces tough submersible HEC-4000 PLC - 03/01/10 HEC-4000-E-R has a sealed, water-tight enclosure with pluggable connectors, is submersible to three feet, and works in temperatures from -40 to 80C.

		ProSoft releases MVI56E Modbus TCP/IP communication modules - 02/28/10 MVI56E for Rockwell Automation ControlLogix Programmable Automation Controllers (PACs) interfaces with devices using the Modbus TCP/IP protocol.

		National Instruments releases high temperature PACs - 02/28/10 NI cRIO-9023 and NI cRIO-9025 real-time controllers operate at temperatures between -40 and 70 degrees Celsius.

		ProSoft releases MNETC/CR Modbus TCP/IP communication module - 02/26/10 Module connects Rockwell Automation system to multiple Modbus TCP/IP server devices and controllers on the network.

		ProSoft releases Generic ASCII serial communication module - 02/26/10 The MVI56E-GSC provides a way to add two fully configurable ASCII communication ports to the ControlLogix platform without consuming the front port of the processor.

		GE introduces 125Vdc input module for PACSystems RX3i - 02/18/10 Input module provides interface between the RX3i and external input devices such as sensors, push buttons, and switches.

		Online Development announces eATM tManager Standalone module - 02/14/10 The module can connect controllers from Rockwell Automation, Siemens and Schneider with popular databases such as MS SQL, DB2 and Oracle as well as Java Message Service (JMS) systems.

		ASI adds 12V output to CWRE PLC pluggable replay - 02/07/10 The 12 Vac model for the CWRE series easily mounts on a DIN rail.

		CimQuest INGEAR announces USB license key - 02/07/10 USB license key (dongle) makes it very easy for users to move developmental licenses between computers.

		SweetWilliam adds Ethernet/IP to ScadaMobile iPhone app - 02/03/10 ScadaMobile 1.3 SCADA application software for the iPhone platform now supports Allen Bradley Logix controllers through Ethernet/IP. Price: $74.99.

		Divelbiss releases HEC-1000-E-R extended temperature PLC - 01/25/10 HEC-1000-E-R Harsh Environment Controller has a temperature range of -40 to +80C and a sealed, water-tight enclosure with plugable connectors.

		eWON upgrades CD line of industrial routers - 01/19/10 CD routers now have fully integrated MPI/Profibus protocol support with data rates up to 12 Mbit/s for remote maintenance of S7 PLCs.

		Divelbiss announces Micro Bear OEM controller - 01/12/10 Micro Bear programs in ladder logic with function block using the Divelbiss PC-based EZ Ladder Lite software

		Unitronics speeds up Vision130 & Vision350 PLCs - 12/30/09 Vision130 and Vision350 TR models can handle inputs up to 200kHz while high-speed outputs are able to support 5Hz to 200kHz.

		WAGO releases 750-352 ECO Ethernet coupler - 12/10/09 750-352 ECO Ethernet Fieldbus Coupler enables the transition from centralized PAC/PLCs to flexible, decentralized networks.

		AutomationDirect introduces Productivity3000 PAC - 12/02/09 Productivity3000 is a modular, rack-based system of up to 116,000 I/O points with local, expansion and remote I/O bases and a full lineup of discrete, analog and specialty I/O modules. Price: $599.

		Online Development introduces cATM-BLY90 appliance transaction module - 11/24/09 Appliance makes it easier to migrate legacy ABB Bailey Infi 90 or Network 90 DCS to ControlLogix PACs from Rockwell Automation.

		Siemens enhances S7-mEC embedded controller - 11/19/09 S7-mEC modular Embedded Controller system has more expansion modules for additional hardware interfaces and an integrated HMI.

		Molex adds AOPs to PLCs for RSLogix software - 11/17/09 Brad PLC communication modules are now offered with Add-On Profiles (AOPs) for Rockwell Automation’s RSLogix 5000 software.

		GE Fanuc expands VersaMax Micro Plus Controller firmware - 11/15/09 Enhancements expand communications connectivity, add high precision temperature sensing, and increase the amount of devices that can be controlled with a low end controller.

		HMS Industrial Networks announces J1939 to Profibus gateway - 11/11/09 Gateway enables a Profibus-DP Master to read and write J1939 network data for control and monitoring tasks.

		Advantech announces APAX-5000 programmable automation controller - 11/04/09 The APAX-5000 series has two standalone CPU modules working together responsible for different tasks. One is for HMI/SCADA while the other is dedicated for SoftLogic I/O tasks.

		AMCI announces 3100 series motion control for MicroLogix - 10/26/09 3100 series controllers plug directly into a MicroLogix PLC to control servo and/or stepper drives.

		LDT Sensors Get Interface Module for ControlLogix PLC - 10/14/09 The 7252 LDT/MDT interface card can directly interface to two magnetostrictive sensors with PWM, control pulse, or start/stop signals.

		CimQuest updates INGEAR.NET v2 HMI software - 09/22/09 Updated libraries give any Visual Studio.NET project a direct communication pipeline to PLCs and other controllers without need for middle layers of software.

		Rockwell Automation adds HMI to PlantPAx control system - 09/21/09 Additions include two visualization servers and an operator workstation, and pre-installed software and a pre-configured operating system to reduce the time needed for installing equipment.

		Opto 22 enhances PAC Project software - 09/14/09 PAC Project 8.5 supports additions to Opto's Ethernet-based components—specifically, intelligent SNAP I/O processors and standalone and rack-mounted programmable automation controllers.

		Omron enhances CX-One PLC software - 08/30/09 Version 3.2 expands the communications networks supported by adding EtherNet/IP, CompoNet and PROFINET.

		ProSoft Technology releases wireless POINT I/O adapter - 08/27/09 ILX34-AENWG 802.11g I/O communication adapter offers a convenient wireless alternative for linking Rockwell Automation controllers to distributed process I/O modules.

		Itris announces PLC DocGen documentation tool for PLC programs - 08/27/09 PLC DocGen automatically generates a dataflow oriented view of a PLC program (from inputs towards outputs) represented by equations and flowcharts.

		Sweet William Automation announces ScadaMobile for iPhone - 08/12/09 ScadaMobile is a native iPhone app that provides access to variables and memory of programmable logic controllers (PLCs).

		Weidmuller introduces PLC-specific interface cable - 08/06/09 pre-assembled cables and modules are available for the most common industrial PLCs and Micro PLCs from all major manufacturers including Rockwell, Siemens, GE Fanuc, Telemecanique, Omron and ABB.

		Rockwell adds Ethernet Device Level Ring to its Integrated Architecture - 08/06/09 DLR network technology takes advantage of embedded switch functionality in automation end devices, such as I/O modules and programmable automation controllers.

		GE Fanuc adds PACs to Proficy Process Systems - 08/05/09 Version 1.6 of Proficy now supports PAC8000 process controllers and the PACSystems redundant Rx3i controllers.

		ABB announces AC500-eCo PLC - 07/14/09 AC500-eCo includes integrated digital and analog inputs and outputs on-board the CPU, which can support up to seven S500 I/O expansion modules.

		Technosoft announces Motion Control Libraries for PLCs - 07/09/09 The library is a collection of high-level functions and blocks allowing the control of Technosoft intelligent drives from a B&R PLC.

		ProSoft Technology releases Modbus TCP/IP to PROFIBUS DPV1 Gateway - 06/21/09 5204SE-MNET-PDPMV1 supports and integrates with Schneider Electric Modicon M340 processors.

		UEI updates UEIPAC Programmable Automation Controller - 06/16/09 Enhancements to Version 2.0 of the UEIPAC Programmable Automation Controller include Linux, Xenomai and Eclipse IDE support.

		AutomationDirect adds analog CPUs to PLCs - 06/11/09 Analog CPUs have two analog inputs and two outputs with ranges of voltage up to 5 Vdc or current up to 20 mA.

		GE Fanuc announces PAC8000 controllers with DCS functionality - 06/10/09 PAC8000 controllers work with Proficy Process Systems software to provide a complete distributed control system.

		GE Fanuc makes PACSystems RX3i Controller redundant - 06/02/09 RX3i offers true dual redundancy data synchronization with dual modules and dedicated, redundant links to one another. They operate with virtually no overhead added to the control application.

		Softing updates Siemens S7/S5 OPC server - 05/28/09 V4.0 integrates with the Siemens Step7 programming software by offering a direct import of the tag names (S7 symbols) from the S7 project.

		Omniflex introduces EasyView HMIs for PLCs - 05/27/09 EasyView 500 and 8000 family of graphics panels connect to PLCs, RTUs and other intelligent instruments.

		Rockwell Automation releases Logix-XT for extreme environments - 05/14/09 Logix-XT controller, FLEX I/O-XT and communication modules reduce the need for additional heating and cooling equipment.

		Softing releases SIMATIC STEP7 and PDM Driver - 05/11/09 SIMATIC driver seamlessly integrates Softing's PROFIBUS (master) interface boards and PROFIBUS gateways with SIMATIC STEP7 and PDM.

		Yokogawa adds PLC logic to UTAdvanced hybrid temperature controller - 04/27/09 UTAdvanced combines PID control with embedded ladder sequence control that supports 84 ladder commands, 24 DIO points, four analog inputs, three analog outputs and allows up to 400 ladder steps.

		ProSoft Technology releases Message Manager Module - 04/22/09 ILX56-MM Message Manager hardware enables data transfer for up to 16 Rockwell Automation, Siemens and Schneider PLCs without requiring message programming or ladder logic.

		Siemens introduces Simatic S7-1200 compact controller - 04/22/09 S7-1200 includes built-in Ethernet, motion control I/O, analog I/O and an HMI panel to minimize space requirements and the need for additional hardware in small control systems.

		ILS Technology adds Siemens S7 PLC to deviceWISE software - 04/21/09 Using deviceWISE lets users of SIMATIC CP 343-1 ERPC for the S7 family process data and send it to a variety of external systems.

		MDT AutoSave module reports changes in PLCs and other devices - 04/20/09 AutoSave Reports Module allows users to generate over 70 unique reports from historical data.

		Phoenix Contact PLC makes networking easy for small applications - 04/16/09 ILC 170 ETH 2TX controller has two Ethernet ports, allowing easier networking for small applications.

		Opto 22 adds wireless to SNAP PAC - 04/14/09 SNAP PAC System family of programmable automation controllers, I/O, and accessories provides both wireless and wired Ethernet networking options.

		Ethernet Direct's DGM-410 automation controller knows where it is - 04/09/09 DGM-410 and DGM-410LCD mini programmable controllers have a GPS and a cellular transceiver to monitor industrial equipment.

		National Instruments announces industrial controllers with Core Duo processor - 04/05/09 3110 has an Intel SL9JT L2400 1.66 GHz Core Duoprocessor and the 3100 has an Intel 1.06 GHz Celeron M 423 processor. Both are configured with the Windows XP operating system.

		Newcon Data announces disk drive replacement for ABB Master - 04/01/09 DDR is a replacement for the old 5.25” floppy disk drives, DSMD 113 and DSMD 110, and uses a flash memory for storage (SD card).

		Online Development updates cATM PLC-to-PLC interface - 03/25/09 Enhancements include a browser-driven setup utility and interfaces that automatically recognizes all controller tags or registers, and interfaces to Siemens S7 and Schneider Modicon Quantum PLCs.

		ACS releases SPiiPlus LF-CM machine controller - 03/24/09 SPiiPlus controller provides multi-axis integrated control, CANOpen network, and a full PLC, programmable in any of the standard 5 IEC61131-3 languages.

		Opto 22 adds microSD to SNAP PAC PACs have a microSD card slot in the top of the controller that supports standard microSD memory cards up to 2 GB in capacity.

		Omron releases PLC-Based CJ position controllers - 03/08/09 CJ position controllers use a high-speed motion network to provide precise control of 2, 4 and 16 axes.

		National Instruments introduces PXI-8110 quad-core PXI controller - 03/01/09 PXI-8110 provides up to 80 percent performance improvement over dual-core controllers with similar CPU clock frequencies.

		Control Microsystems upgrades TelePACE ladder logic editor - 02/24/09 Enhancements in TelePACE Studio include customizable workspace, drag-and-drop logic elements and single click access to element configuration.

		ISaGRAF updates ISaGRAF 5 software - 02/16/09 Enhancements include ISaVIEW integrated HMI, Windows Vista compatibility; and Advanced Control Function Blocks for faster development and reduced resource consumption.

		Unitronics announces Jazz PLC/HMI with temperature inputs - 02/12/09 Jazz PLC has an embedded HMI and direct temperature measurement inputs.

		Unitronics enhances Vision350 PLC with color touchscreen - 02/12/09 Enhancements to Vision350 PLC and HMI includes a color touchscreen, an improved processor, and more I/O options.

		Unitronics releases Vision570 controller - 02/12/09 Vision570 compact controller has a color touchscreen, full PLC functionality, on-board I/O, and built-in recipe capability

		OSI adds ACP logic control to OSIRIS RTU - 12/18/08 Automation Control Platform (ACP) supports Ladder Diagram, Function Block Diagram, Sequential Function Chart, Structured Text and Instruction List plus Flow Chart.

		SEW-EURODRIVE releases MOVI-PLC on a card - 12/16/08 MOVI-PLC can handle up to 64 axes of motion control applications, with curves calculated online, multi-axis interpolation and kinematic transformation.

		FasTrak releases Profibus Configurator software - 12/15/08 Profibus Configurator makes Profibus network setup and I/O configuration for Simatic 505 and CTI 2500 Series processors simple and convenient.

		National Instruments introduces cRIO-9073 CompactRIO PAC - 12/11/08 cRIO-9073 system combines an embedded real-time processor and a user-programmable FPGA chip within a single chassis.

		Advantech introduces ADAM-5240 motor control module - 12/09/08 ADAM-5240 provides high-speed 4-axis motion control for use with the ADAM-5550 series PACs (Programmable Automation Controllers).

		Itris adds Rockwell Automation PLCs and PACs to PLC Checker - 12/01/08 PLC Checker, for automatic coding rules verification, now supports PLC programs written with the RSLogix development environment.

		Divelbiss announces SI-Application modules - 11/20/08 SI-APPMOD Series of preprogrammed monitor and control solutions include a tachometer, counter, hour meter, timer, and analog ranging units.

		SoftPLC adds Enron Modbus serial and ethernet drivers - 11/20/08 Enron Modbus is a modification to the standard Modbus communication protocol, used in chromatographs, flow computers, odorization systems, RTUs, and fire/gas alarm systems.

		Rockwell Automation releases FactoryTalk ViewPoint software - 11/20/08 FactoryTalk ViewPoint software supports displays of FactoryTalk and Allen Bradley PanelView Plus applications via any Internet browser.

		Rockwell Automation adds industry-specific applications to FactoryTalk - 11/19/08 FactoryTalk uses a service-oriented architecture (SOA) to support applications in the automotive, CPG and pharmaceutical industries.

		Rockwell Automation introduces Virtual Design & Production utility - 11/19/08 The utility in RSLogix 5000 programming software provides seamless integration with DELMIA V5R19 PLM software from Dassault Systèmes,

		Rockwell Automation releases MicroLogix 1400 controllers - 11/17/08 MicroLogix 1400 controllers come with or without embedded analog I/O. Prices start at $795.

		Rockwell Automation introduces I/O Wiring conversion system - 11/13/08 Wiring conversion system helps minimize wiring errors and reduce labor costs when migrating to newer programmable automation control systems.

		Bosch Rexroth adds three Inline I/O modules for PLCs and PACs - 10/27/08 Inline I/O modules for encoder feedback, step and direction control, and pulse width modulation work with any Rexroth scalable PLC or PAC.

		Bosch Rexroth releases IndraControl L65 PAC - 10/21/08 IndraControl L65 PAC has scalable hardware, flexible connectivity for integration in Ethernet-based networks, and a fast processor for shorter machine cycle times.

		AutomationDirect releases $69 CLICK PLC - 10/16/08 CLICK line of micro brick PLCs has stackable I/O modules and free programming software.

		AMCI releases SD17060E stepper motor indexer/driver - 10/15/08 SD17060E connects to Allen-Bradley PLCs via Ethernet IP, eliminating the need for a separate controller.

		Siemens announces I/O modules for S7-200 PLC - 10/08/08 High density, four- and eight-channel modules are available for analog inputs, thermocouples and RTDs.

		GE Fanuc introduces PACMotion controller - 10/08/08 PACMotion modules control up to four axes plus a master axis. Up to 10 modules can be placed in a rack for simultaneously control of up to 40 axes.

		Opto 22 enhances SNAP I/O for Allen-Bradley - 10/06/08 Free firmware upgrade adds support for EtherNet/IP communications protocol, giving automation engineers remote I/O options for ControlLogix and CompactLogix control systems.

		VarTech releases NEMA 4 and 4X Panel PCs - 10/03/08 Panel PCs have resistive touch screens, Pentium processors and 1GB of system memory.

		Beckhoff improves TwinCAT Scope Tool - 10/01/08 Enhancements include simple configuration, advanced graphics and extended functionality.

		ProSoft Technology releases PS69 PROFIBUS DP modules for CompactLogix - 09/29/08 With PS69 modules, users can combine the benefits of PROFIBUS DP with the power of the CompactLogix platform.

		GE Fanuc announces Sequence of Events (SOE) for PACSystems - 09/25/08 SOE captures the first event and sequence of events that occur in the system, during a shutdown or a trip sequence, to help users document when events have occurred.

		PC Enclosures releases PLC-1218 PLC Cabinet - 09/15/08 PLC-1218 provides protection for all PLC, I/O card modules, and fuse blocks with a complete view of the PLC control panel.

		GE Fanuc introduces I/O module for VersaMax Micro - 09/15/08 VersaMax Micro Thermocouple expansion module can be used for temperature monitoring and controlling, as well as weighing applications.

		WAGO releases 750-871 Ethernet controller for PLCs - 09/03/08 The 750-871 provides PLC control to local and networked devices without incurring additional component costs.

		Phoenix Contact introduces nanoLine programmable controller - 08/26/08 NanoLine programmable controller/relay has Ethernet connectivity, a removable operator display, and flow chart programming.

		GE Fanuc announces RTD and thermocouple input modules for PACs - 08/04/08 Isolated thermocouple analog input modules and the isolated RTD module work with PACSystems RX3i.

		Rockwell Automation expands Logix family for users and machine builders - 08/01/08 Enhancements include Stratix, advanced process control and safety functionality, and three new Logix programmable automation controllers (PACs).

		ABB releases AC 700F controller for small process applications - 07/28/08 AC 700F closes the gap between PLCs (Programmable Logic Controllers) and complex process control systems.

		Omniflex introduces distributed alarm management system - 07/28/08 MAXILARM has sub-millisecond time stamping at source, integrated analog logging, and remote alarm fascias all to meet EEMUA 191 guidelines.

		Omron STI introduces DST1-XD safety I/O terminals - 07/18/08 Terminals can operate as part of a DeviceNet Safety Network, or as a stand-alone safety system monitored through a DeviceNet network.

		WebDock updates DataPort Data Collection for RSLinx - 07/18/08 Enhancements to DataPort 2008.14 include graphing from the main program, email abilities and bug fixes.

		Divelbiss announces PLC Programming Trainer/Simulators - 07/02/08 SI-DEMO-01 and SI-DEMO-02 work with Solves-It! family of plug-in programmable logic controllers.

		WebDock releases DataPort Data Collection for RSLinx - 07/01/08 DataPort is a data collection software package for Rockwell/A-B processors.

		Phoenix Contact releases ILC 150 VLC Controller with Steeplechase VLC 7.2 - 06/27/08 ILC 150 VLC embedded control platform has an EtherNet/IP port and Steeplechase Visual Logic Controller (VLC) flowchart-based programming tool.

		Beckhoff Automation expands PLC family - 06/12/08 BC9120, BC9020 and BC9050 can be operated as a stand-alone PLC or as decentralized intelligence in an Ethernet network.

		AutomationDirect releases F2-16TDxP DC Output Modules - 06/05/08 F2-16TDxP 16-channel current output modules for DL205 PLCs are priced at $119.

		CimQuest INGEAR upgrades NET.ABLink for Allen-Bradley PLCs - 06/05/08 Enhancements to NET.ABLink 2.0 include improved access to Micrologix data files, Windows Vista compatibility and support for Microsoft Visual Studio 2008.

		Itris Automation's PLC Converter supports Modicon M340 PAC - 06/03/08 PLC Converter automatically translates PLC programs and thus saves many hours of manual rewriting.

		Divelbiss introduces analog Solves-It plug-in PLC - 05/30/08 Solves-It! controllers are suitable for small system control and monitoring applications where primarily analog processes are involved.

		Advantech announces ADAM-5081 quadrature encoder - 05/11/08 ADAM-5081 high speed quadrature encoder and counter module is for use with ADAM-5550 series Programmable Automation Controllers (PACs).

		Opto 22 lets OEMs encrypt PAC Project software - 05/05/08 Secure Strategy Distribution System gives Original Equipment Manufacturers (OEMs) and machine builders the ability to encrypt firmware and control programs.

		Omron announces CJ1W-PH41U Analog Input Module for PLCs - 05/01/08 CJ1W-PH41U four-point PLC analog input module has temperature resolution to 0.001 degree Celsius.

		MTL announces HCS 8000 hybrid control system - 04/14/08 System has Elipse E3 automation software tightly integrated with MTL's MOST Process Automation Controllers and I/O

		Bosch Rexroth releases IndraControl L10 PLC - 04/08/08 IndraControl L10 PLC has unified software, scalable hardware, reusable code and pre-developed functions to help machine builders reduce engineering time.

		Entertron adds touch screen to Smart-PAK PLCs - 04/08/08 Entertron now offers Beijer's H-Series touch screens with its PLCs. Prices start at $395.00

		Sprint Electric introduces PLA to replace PLCs or PCs - 03/13/08 Programmable Logic Arithmetic unit (PLA) works with analog or digital drives, simplifies system design, and reduces or eliminates need for PLC or PC based systems.

		Technosoft releases PIM2401 motion controller with CANopen - 03/04/08 PIM2401 embeds a digital drive, motion controller and PLC functions in the same unit to control DC, brushless, linear and step motors.

		A-B CompactLogix and PanelView earn Marine Certification - 02/21/08 Marine certification was gained after a testing process conducted by seven global agencies over a 45-day period.

		Nubitek enhances Nubitek_Email for Siemens S7-200 PLC - 02/21/08 Enhancements enable Siemens S7-200 to send email reports for monitoring and supervising, and send SMS messages direct to a mobile phone for alerts and alarms.

		Hardy Instruments adds A-B RIO to 4050 Weight Controllers - 02/20/08 The HI 4050 general-purpose weight controller is now available with Allen-Bradley Remote I/O (RIO) network communications.

		Nubitek releases SMS manager for SIEMENS S7-200 PLC - 02/12/08 Nubitek_SMS_Manager manages unlimited outgoing SMSs to multiple destination phones and recognizes commands in the text of received SMSs.

		Advantech Launches UNO-4678 Celeron M Embedded Controller - 02/10/08 UNO-4678 high-performance fanless embedded automation controller has an onboard Celeron M 1 GHz processor and 512 MB of memory. Prices start at $1,555.

		GE Fanuc announces PACSystems RX3i CPU320 - 02/06/08 PACSystems RX3i CPU320 incorporates an Intel 1 GHz processor and 64 Mbytes of user memory, allowing it to reduce logic execution times by up to 70%.

		Mitsubishi releases iQ Automation Platform - 02/05/08 iQ Automation is the next generation of Mitsubishi's automation systems based on Programmable Automation Controllers (PACs)

		Divelbiss releases HEC-2000 PLC - 12/27/07 The HEC-2000 is programmed using Divelbiss EZ Ladder software which supports ladder diagram with function block programming.

		Rockwell introduces CompactBlock Guard Ethernet I/O - 12/17/07 CompactBlock Guard I/O on EtherNet/IP safety I/O module detects failures at the I/O and field-device level. It works with safety PLCs.

		Beckhoff Automation announces CX1010 Mid-range Embedded PC - 12/13/07 Starting under $1,000 with bundled TwinCAT PLC software and Windows operating system (OS), the EtherCAT-ready CX1010 is positioned as the new mid-range performance device in the scalable CX Family.

		AutomationDirect introduces Industrial Ethernet Switches - 12/12/07 Built for industrial environments, the new Ethernet switches are designed specifically for PLC, HMI and drive users. Available are 5-port and 8-port Ethernet switches, 4-port and 8-port Ethernet switches with one 100BaseF fiber port, and an Ethernet to Fiber Media Converter.

		Semaphore introduces Kingfisher G30 Compact SCADA System RTU - 12/04/07 The G30 RTU also extends the full capabilities of Semaphore’s Kingfisher PLUS+ product line to small SCADA system applications requiring up to 32 I/O points.

		austriamicrosystems introduces the AS1542 12-bit ADC - 12/04/07 The high speed of 1Msps combined with 16 input channels makes the AS1542 ideal for networking equipment, motor control, industrial automation, wired and wireless communications and all forms of data acquisition.

		NI announces LabWindows/CVI 8.5 - 12/03/07 With LabWindows/CVI 8.5, programmers can achieve increased performance on multicore systems with full control over thread management, built-in multithreaded libraries and drivers, thread-safe analysis functions and advanced debugging tools.

		Siemens introduces Simatic Field PG M2 programming device - 11/18/07 Simatic Field PG M2 for notebooks is used for configuring, start-up, service and maintenance of automation installations.

		NI adds Multicore to PXI and PXI Express controllers - 11/12/07 NI 8352 and NI 8353 controllers now include Intel Multicore processors and enhanced data storage capabilities.

		Festo announces CPX/FEC controller - 10/30/07 CPX-FEC combines a PLC and a modular CPX electrical terminal.

		Beckhoff Automation introduces CX9010 Embedded PC - 10/24/07 EtherCAT-ready device has Windows CE Operating System and TwinCAT automation and control software

		Beckhoff introduces eXtreme Fast Control (XFC) - 10/23/07 Optimized control and communication architecture improves Industrial PC performance by a factor of 10

		IntelliCom announces NetBiter Serial Server for Rockwell PLCs - 10/23/07 The gateway connects RS Logix 500 Windows tools and ControlLogix, MicroLogix, CompactLogix, SLC-500 and PLC-5.

		Opto 22 Releases SNAP PAC Serial I/O processors - 10/16/07 I/O processors are used for serial I/O networking and performing local control for SNAP I/O.

		IXXAT adds CANopen to ProConOS Runtime System - 10/09/07 ProConOS IEC 61131-3 runtime environment and the Multiprog development environment are now offered with CANopen support.

		Opto 22 releases SNAP PAC S2 programmable automation controller - 10/08/07 SNAP-PAC-S2 programmable automation controller (PAC) has four serial ports and a dual Ethernet interface. Price: $1495

		RTA releases InstantPLC chip - 10/07/07 InstantPLC is a complete IEC 61131-3 controller on an IC chip with integrated industrial networking.

		FieldServer introduces SlotServer Fire Alarm interface for ControlLogix - 10/05/07 SlotServer ControlLogix/Fire Alarm Control Panel (FACP) Interface Module interfaces any major Fire Alarm Control Panel to a ControlLogix PLC.

		Opto 22 enhances PAC Project 8.1 - 10/02/07 Improvements include distributed control functions and support for SNAP PACs, Brains, and I/O.

		AMCI announces 5274 inspection module For ControlLogix - 10/02/07 5274 takes analog samples at known points and compares these measured values to a profile to determine if a tested part passed or failed.

		Adept introduces ePLC Connect for PLC-based robot programming - 09/25/07 PLC interface enables Adept robots to be programmed using Rockwell PLC-based robot programming language.

		Divelbiss adds OptiCAN network - 09/24/07 OptiCAN allows networking of multiple PLCs, which makes distributed control extremely simple to accomplish.

		Rockwell Automation adds CompactLogix L45 Controller - 09/24/07 L45 controller offers expanded scalability and integrated motion control, and handles up to eight axes.

		Artila announces iPAC-5010 Linux-based PAC - 09/19/07 In addition to its open Linux operating system, the iPAC-5010 also has a boa web server, busybox utility, and the Gnu C/C++ GLIBC tool chain.

		Wonderware releases DA Servers for Omron PLCs - 09/17/07 Servers support Omron FINS Serial, FINS Ethernet, HostLink Serial and E5 Series protocols for communicating to Omron PLCs and temperature controllers.

		Online Development announces cATM to connect PACs with PLCs - 09/17/07 cATM module helps users of Allen-Bradley SLC 500, PLC-2 and PLC-5 controllers connect to ControlLogix PACs.

		Matrikon releases OPC Server for Allen-Bradley PLCs - 09/16/07 The server connects to devices via serial connections, single port Allen-Bradley 1784- PKTX PCI cards and Ethernet.

		SICK releases remote Safety Controller product line - 09/13/07 The controllers replace traditional safety control solutions that require both standard PLCs and safety-rated PLCs.

		Omniflex announces Teleterm Silent Sentry alarm monitor - 09/06/07 Silent Sentry monitors a wide range of inputs and send SMS Alarm messages upon detection of an alarm condition.

		Audon Electronics releases CUTOUCH CT1721 PLC - 09/06/07 CT1721 includes an integrated touch panel, 5.6 in. graphic LCD, and a programmable embedded computer. Price: £250

		UEI speeds up UEIPAC programmable automation controller - 08/28/07 Maximum sample rate and the PAC's ability to process PID loops have been sped up by 8X. Existing PACs are field upgradeable at no charge.

		Schneider Electric releases Modicon M340 PAC - 07/11/07 M340 PAC has 4MB of internal memory (upgradable to 16MB), 256KB data, and can manage applications with up to 70K instructions. It provides fast execution of both Boolean processing and floating decimal calculations.

		GE Fanuc Announces Portable Program Device - 06/28/07 The PPD enables a user to upload and download controller configuration and logic to/from any USB Memory Stick using USB connection.

		AutomationDirect releases analog modules for DirectLOGIC PLCs - 06/17/07 New modules include 16-bit high-resolution analog modules designed for the DL05 and DL06 PLCs.

		Advantech introduces AMAX Programmable Automation Controller - 06/01/07 The AMAX distributed control PAC combines analog, discrete and motion control. Prices start at $485.

		GE Fanuc announces low-end Durus Controller - 05/04/07 Durus integrates I/O, operator interface and control in one small package.

		Woodhead adds Modbus TCP to BradControl IP20 I/O - 04/17/07 IP20 BradControl Block I/O system now includes Modbus TCP (UDP). The Ethernet Modbus TCP (UDP) network adapter operates as a slave device in the Ethernet control system, gathering signals and data from local field devices through expansion modules.

		National Instruments LabVIEW supports Windows Vista - 04/16/07 LabVIEW forWindows Vista. includes both the desktop development environment as well as related application software including the LabVIEW Real-Time and LabVIEW FPGA modules. NI also offersg PXI embedded controllers with Windows Vista pre-installed as the default operating system.

		IntelliCom announces NetBiter gateway for Siemens S7 PLCs - 04/16/07 The gateway makes a transparent connection between standard Siemens Step 7 Windows tools and the Siemens S7-200/300/400 PLCs. This provides instant access to remote installations without traveling to the sites.

		National Instruments releases cRIO-9014 embedded controller - 04/03/07 The cRIO-9014 controller, based on the Freescale MPC5200 processor and Wind River VxWorks RTOS, delivers processing speed, memory and storage required for embedded and industrial applications such as high-speed machine control, machine monitoring/protection, in-vehicle data logging and embedded device prototyping.

		Eaton announces Vickers digital-ready valves - 04/02/07 DG4V3 70 series valve has an environmental rating of IP 67 and features plug in coils, universal M12 four-pin connector and surge protection. It works with a PLC via a serial interface.

		Beckhoff announces CP72xx Panel PCs - 03/27/07 CP72xx Panel PCs are designed for simple mounting arm installation and integrate all features required for HMI hardware and advanced PC-based machine control. They come with a 1.5 GHz Intel Celeron M processor as standard and can be optionally equipped with Intel Pentium M processors up to 1.8 GHz.

		Opto 22 Introduces SNAP PAC Sim software - 03/26/07 SNAP PAC Sim software provides the functionality of a SNAP PAC programmable automation controller in a Microsoft Windows-based PC.

		Rexroth enhances communications in IndraLogic PLC - 03/23/07 IndraLogic PLCs now have DeviceNet and EtherNet IP connectivity.

		United Electric announced UEIModbus I/O module - 03/22/07 UEIModbus Ethernet-based data acquisition and control interface communicates with a host computer or PLC over Modbus TCP. It functions as a Modbus slave easily accessed by any software client acting as a Modbus master.

		Rockwell Automation enhances Allen-Bradley MicroLogix 1100 - 03/22/07 Enhancements include increased power, speed and expanded communication capabilities. An embedded communications port and Web server give users access to control information for real-time data sharing with OEM partners, remote maintenance engineers and personnel.

		B&B Electronics announces MicroSmart Pentra fast PLC - 03/22/07 The overall processing speed of the MicroSmart Pentra's CPU is 16 times faster for simple instruction execution, and more than 14 times faster when executing advanced instruction sets. It supports double-word and floating point math operations, capturing and storing large values, and returning computed results accurate to seven decimal places.

		GE Fanuc announces isolated Relay Output Module - 03/20/07 The 4A Relay Output module provides 16 Form A relays for controlling output loads, such as motor starters, solenoids, and indicators. Each output point is isolated, and each has a separate common power output terminal. Outputs provide a high degree of noise immunity, minimizing the need to add external snubbers.

		Rockwell Automation adds EWEB Web server to CompactLogix - 03/15/07 The Allen-Bradley EWEB module for the CompactLogix Programmable Automation Controller (PAC) provides network connectivity and Web capabilities for simplified remote data monitoring, data sharing and troubleshooting, bringing large-machine capabilities to control system applications with less than 2,000 I/O nodes.

		Opto 22 releases SNAP motion control subsystem - 03/12/07 SNAP Motion Control Subsystem offers a cohesive development platform for applications that require motion control along with analog, digital, and serial control. The system combines a SNAP Motion host communication module in a SNAP I/O form factor, a SNAP Motion breakout board, and the OptoMotion command library.

		Advantech unveils ADAM-5550KW Programmable Automation Controller (PAC) - 03/08/07 ADAM-5550KW Programmable Automation Controller (PAC) is for control tasks that require the features of both PLCs and Industrial PCs. It has an AMD Geode GX533 CPU along with control specific features such as a watchdog timer, battery backup RAM, deterministic I/O, IEC61131-3 programming languages and Windows CE 5.0. Prices start at $995.

		SEW-Eurodrive releases MOVI-PLC controller - 03/07/07 MOVI-PLC controller integrates PLC control and motion control in one compact device. This eliminates the need for a dedicated PLC system and drive-to-PLC interfacing and other programming, as well as the wiring and panel space required for a dedicated drive and motion PLC.

		National Instruments releases LabVIEW SignalExpress - 03/05/07 LabVIEW SignalExpress interactive measurement software simplifies data logging, instrument control and academic instruction. It provides one-click, plug-and-play setup with NI's CompactDAQ USB-based modular data acquisition system, and works with more than 270 data acquisition devices.

		NI adds 19 I/O Modules and LabVIEW to CompactDAQ - 03/05/07 Modules include 20 mA current I/O, channel-to-channel isolated analog inputs, RTD sensor inputs, high-density digital I/O, and a universal input module. Each CompactDAQ chassis is shipped with the LabVIEW SignalExpress data-logging software.

		Opto 22 announces SNAP PAC System - 03/01/07 The SNAP PAC system includes PAC Project Software Suite, higher performance SNAP PAC brains, five SNAP I/O modules, four SNAP PAC racks, OptoDataLink enterprise connectivity software, SNAP Motion Control Subsystem, and SNAP PAC Sim, a software application that simulates a fully functioning SNAP PAC controller on a PC.

		Beckhoff Automation announces Mini PCI Fieldbus Cards for Industrial PCs - 02/27/07 Mini PCI fieldbus cards support PROFIBUS, CANopen, DeviceNet and Ethernet networks. The resulting smaller PC size saves valuable control cabinet space, but, like standard PCI fieldbus cards, the interfaces are optimized for fast controllers and real-time tasks.

		RTP announces Viking III distributed controller - 02/22/07 Based on the Intel Celeron processor, the Viking III improves the speed of execution of floating point calculations, such as PID controls, Fuzzy Logic, and advanced C++ algorithms.

		ICS Triplex ISaGRAF is compliant with IEC 61131-3 - 02/22/07 Version 5.0 of ISaGRAF has been confirmed by TÜV Rheinland to be compliant with the requirements detailed in the IEC 61131-3 standard. ISaGRAF 5 incorporates both the IEC 61131-3 and IEC 61499 standards.

		Schneider Electric releases Telemecanique Unity application generator software - 02/22/07 The UAG platform creates and manages application and configuration data for a PLC-based process control solution and the associated HMI and SCADA system. This gives users one tool to design a complete automated solution.

		Online Development enhances xCoupler Module for ControlLogix - 02/21/07 Enhancements to xCoupler plant to business system data modules include message acknowledgement, handshaking and store-and-forward features. These modules work with Rockwell Automation ControlLogix PACs.

		GE Fanuc adds serial communications modules to PACSystem RX3i - 02/21/07 Modules include a model that provides two independent, isolated serial ports and one that provides four independent, isolated serial ports. Up to six modules can be located in the RX3i backplane. Each port can be configured for MODBUS Master, MODBUS Slave, or Serial I/O protocol.

		Rockwell announces ControlLogix L64 PAC with large memory - 02/01/07 The L64 Programmable Automation Controller (PAC)has 16MB of memory, twice the memory of previous models. For information-intensive applications, such as batch processing, the L64 provides larger storage capacity to store more data locally, enabling the user to switch recipes to meet production line demands.

		Rockwell Automation enhances RSLogix 5000 programming software - 02/01/07 The latest version includes 30 product enhancements that help users simplify programming and configuration and ease maintenance and troubleshooting of control and information systems. These include user-defined add-on instructions designed to improve standardization and code reuse; integrated drives configuration; Kinematics robot control; FuzzyDesigner to create fuzzy logic algorithms; and Logix alarm instructions.

		Baumüller releases High-Performance PLC - 01/17/07 the High Performance PLC has a cycle time of 25 µsec per 1,000 lines of STL. It has a 32-bit RISC CPU that runs at 667 MHz, 64 MB Flash memory, and five fieldbus module interfaces. The ProMaster Engineering Framework is used to configure the PLC system, the network components, or individual machine units.

		Beckhoff Automation adds OPC Unified Architecture to control software - 12/12/06 TwinCAT automation software now conforms to OPC UA (Unified Architecture). The new OPC UA standard is based on TCP communication and is, therefore, platform-independent. The "Unified Architecture" specification creates the basis for new platform-independent communication and information technologies.

		Bristol and ISONAS Announce AccessControl for ControlWave Hybrid PLC/RTU - 08/19/05 Bristol Babcock and ISONAS Security Systems announced today the addition of an integrated solution for facility access control to the OpenBSI Security Vision with ControlWaveâ hybrid PLC/RTU.

Automation.com Real-time Information for the Automation Professional May. 26, 2012

Cart

Automation.com

NOTICE: Your use of Automation.com constitutes your agreement to the Legal Notices, Policies, Terms, and Conditions governing its use. You should review these terms before proceeding.Copyright © 2000-2010 Automation.com - automation.com, automationtechies.com, automationtechies, automationtechie, and Member-Match are all trade and service marks of Automation Resources, Inc. All Rights Reserved.