Linux Foundation announces launch of EdgeX Foundry open source project

May 10, 2017 – The Linux Foundation announced the launch of EdgeX Foundry, an open source project to build a common open framework for Internet of Things (IoT) edge computing and an ecosystem of interoperable components that unifies the marketplace and accelerates enterprise and Industrial IoT. The initiative is aligned around a common goal: the simplification and standardization of Industrial IoT edge computing, while still allowing the ecosystem to add significant value.
IoT is delivering significant business value by improving efficiencies and increasing revenue through automation and analytics, but widespread fragmentation and the lack of a common IoT solution framework are hindering broad adoption and stalling market growth. The complexity of the current landscape and the wide variety of components creates paralysis. EdgeX solves this by making it easy to quickly create IoT edge solutions that have the flexibility to adapt to changing business needs.
“Success in Internet of Things is dependent on having a healthy ecosystem that can deliver interoperability and drive digital transformation,” said Jim Zemlin, Executive Director of The Linux Foundation. “EdgeX Foundry is aligning market leaders around a common framework, which will drive IoT adoption and enable businesses to focus on developing innovative use cases that impact the bottom line.”
Unifying the IoT Market
EdgeX Foundry intends to unify the marketplace around a common open framework and building an ecosystem of companies offering interoperable plug-and-play components. Designed to run on any hardware or operating system and with any combination of application environments, EdgeX can quickly and easily deliver interoperability between connected devices, applications, and services, across a wide range of use cases. Interoperability between community-developed software will be maintained through a certification program.
Dell is seeding EdgeX Foundry with its FUSE source code base under Apache 2.0. The contribution consists of more than a dozen microservices and over 125,000 lines of code and was architected with feedback from hundreds of technology providers and end users to facilitate interoperability between existing connectivity standards and commercial value-add such as edge analytics, security, system management and services. This is complemented by the recent merger of the IoTX project into the EdgeX effort, which was previously supported by EdgeX Foundry members including Two Bulls and Beechwoods Software, among others. Additional supporting code contributions by EdgeX members are already underway.
"One of the key factors holding back IoT designs in the enterprise is that there are too many choices to safely and easily implement a system that will provide a return on investment in a reasonable timeframe," said Mike Krell, Lead IoT Analyst at Moor Insights & Strategy.
Founding members include: Advanced Micro Devices (AMD), Alleantia, Analog Devices, Bayshore Networks, Beechwoods Software, Canonical, ClearBlade, CloudPlugs, Cloud of Things, Cumulocity, Davra Networks, Dell, Device Authority, Eigen Innovations, EpiSensor, FogHorn Systems, ForgeRock, Great Bay Software, IMS Evolve, IOTech, IoTium, KMC Controls, Kodaro, Linaro, MachineShop, Mobiliya, Mocana, Modius, NetFoundry, Neustar, Opto 22, relayr, RevTwo, RFMicron, Sight Machine, SoloInsight, Striim, Switch Automation, Two Bulls, V5 Systems, Vantiq, VMware and ZingBox. Industry affiliate members include: Cloud Foundry Foundation, EnOcean Alliance, Mainflux, Object Management Group, Project Haystack and ULE Alliance.
Delivering IoT at the Edge
According to a Gartner report, there will be 20.4 billion connected things in use globally by 2020. The sheer quantity of data that will be transmitted from these devices is driving adoption of edge computing, where connected devices and sensors transmit data to a local gateway device instead of sending it back to the cloud or a central data center. Edge computing is ideal for deploying IoT applications because it allows for quicker data analytics and reduced network traffic. This is essential for applications which require localized, real-time data analysis for decision making such as factory optimization, predictive maintenance, remote asset management, building automation, fleet management and logistics.
“Businesses currently have to invest a lot of time and energy into developing their own edge computing solutions, before they can even deploy IoT solutions to address business challenges,” said Philip DesAutels, PhD Senior Director of IoT at The Linux Foundation. “EdgeX will foster an ecosystem of interoperable components from a variety of vendors, so that resources can be spent on driving business value instead of combining and integrating IoT components.”
Adopting an open source edge software platform benefits the entire IoT ecosystem:
- End Customers can deploy IoT edge solutions quickly and easily with the flexibility to dynamically adapt to changing business needs;
- Hardware Manufacturers can scale faster with an interoperable partner ecosystem and more robust security and system management;
- Independent Software Vendors can benefit from interoperability with 3rd party applications and hardware without reinventing connectivity;
- Sensor/Device Makers can write an application-level device driver with a selected protocol once using the SDK and get pull from all solution providers;
- System Integrators can get to market faster with plug-and-play ingredients combined with their own proprietary inventions.
The Linux Foundation will establish a governance and membership structure for EdgeX Foundry to nurture a vibrant technical community. A Governing Board will guide business decisions, marketing and ensure alignment between the technical communities and members. The technical steering committee will provide leadership on the code and guide the technical direction of the project.
About EdgeX Foundry
EdgeX Foundry is an open source project hosted by The Linux Foundation building a common open framework for IoT edge computing and an ecosystem of interoperable components that unifies the marketplace and accelerates the deployment of IoT solutions. Designed to run on any hardware or operating system and with any combination of application environments, EdgeX enables developers to create flexible IoT edge solutions that can easily adapt to changing business needs.

Check out our free e-newsletters
to read more great articles.
- Posted in:
- Industry
- Related Portals:
- Advancing Automation using IIoT and Industry 4.0 Concepts, Industrial Computers, Sensors & Industrial I/O, Systems Integration
MORE INDUSTRY NEWS
-
Verizon helps Virginia shipbuilding company implement 5G service
With 5G’s increased bandwidth and ultra-low latency, NNS will be equipped to meet network connectivity demands and will test new ways its...
-
Kinedyne announces John Seliga as Vice President of Finance
A certified public accountant, Seliga holds a master’s degree in business administration from Cleveland State University and a bachelor’s...
-
IFR Report: Korea hits record 300,000 industrial robots
Within five years, the country has doubled its number of industrial robots. Following Japan and China, the country ranked third in 2018. But the...
-
Senseye partners with ATS Global to accelerate smart factory strategies
ATS will support Senseye's clients with the design, implementation, or integration of automated machine data systems such as historians or...
-
ARC Advisory Group Report: ABB leads DCS market for 20th consecutive year
According to the report, ABB’s presence in many end-user industries was a major factor in this success. The DCS market saw its main growth in oil...
RELATED
-
Industrial Internet Consortium and oneM2M release whitepaper on Advancing the Industrial Internet...
The joint whitepaper, “Advancing the Industrial Internet of Things,” written by the IIC and oneM2M, demonstrates how these two IoT...
-
Litum IoT helps Ferrero Group enhance worker tracking
Ferrero needed a way to confirm that all its employees could be safely accounted when an emergency evacuation was underway.
-
Association for Advancing Automation Report: North American machine vision market down in 2019
Machine vision systems saw a decrease of 2% year over year, at $599.9 million. This category includes smart cameras and application specific...
-
The Death of the Family Album: Specifying the right cleanroom environment
By Mark Howard, EU Automation
It is vital to understand how cleanrooms truly operate if you are to get the best out of yours. This article... -
Inside the Rise of 5G Industrial Automation Networking
By Bill Lydon, Automation.com
5G is starting to make the goal of wireless industrial automation a reality. Companies are already starting to...