Keithley Releases Precision DC And AC/DC Current Sources | Automation.com

Keithley Releases Precision DC And AC/DC Current Sources

July 142004
Keithley Releases Precision DC And AC/DC Current Sources
Model 6221 is the industry’s only AC current source on the market

Cleveland, Ohio – July 14, 2004 - Keithley Instruments, Inc. (NYSE:KEI), a world leader in advanced electrical test instruments and systems, today introduced its Model 6221 AC and DC Current Source and Model 6220 DC Current Source.

AC Current Source and Current Source Waveform Generator
The Model 6221 is the only AC current source on the market. Until now, researchers and engineers have been forced to build their own AC current sources. The Model 6221 provides better accuracy, consistency, reliability, robustness, and cost effectiveness than “home-made” solutions. It is also the only commercially available current source waveform generator, which greatly simplifies creating and outputting complex waveforms. Pulse widths as short as five microseconds can be programmed, and the instrument supports pulsed I-V measurements.

The Need for Precision, Low Current Sourcing
The models 6220/6221 Current Sources combine ease of use with exceptionally low current noise. Low current sourcing is critical to applications in test environments ranging from R&D to production, especially in the semiconductor, nanotechnology, and superconductor sectors. High sourcing accuracy and built-in control functions make the models 6220 and 6221 ideal for applications such as Hall measurements, resistance measurements using delta mode, pulsed measurements, and differential conductance measurements (an increasingly common measurement for characterizing semiconductor and nanotechnology materials).

Simple Programming
Both current sources are fully programmable via the front panel controls or from an external controller via RS-232 or GPIB interfaces; the Model 6221 also features an Ethernet interface for remote control from anywhere there’s an Ethernet connection. Both instruments can source DC currents from 100fA to 100mA; the Model 6221 can also source AC currents from 1pA to 100mA.

Define and Execute Current Ramps Easily
Both the models 6220 and 6221 offer tools for defining current ramps and stepping through predefined sequences of up to 64,000 output values using a trigger or a timer. Both sources support linear, logarithmic, and custom sweeps. The Model 6221’s combination of high source resolution and megahertz update rates makes it capable of producing high fidelity current signals that are indistinguishable from analog current ramps.

A Powerful Combination with Model 2182A Nanovoltmeter for Resistance Measurements
Device testing and characterization for today's very small and power-efficient electronics requires sourcing low current levels with great precision. Lower stimulus currents produce lower—and harder to measure—voltages across the device. Combining the Model 6220 or Model 6221 with a Keithley Model 2182A Nanovoltmeter makes it possible to address both of these challenges.

When used with the Keithley Model 2182A Nanovoltmeter, both the Model 6220 and Model 6221 measure resistances from 10nohm to 1Gohm. Used in this way, the Model 6221 acts as a high performance alternative to AC resistance bridges and lock-in amplifiers for measuring resistances and coordinates pulsing and measurement with pulse widths as short as 50 microseconds. The combination measures differential conductance up to 10X faster and with lower noise than earlier solutions allow and can be used in delta mode, which improves resistance measurements up to 1000 times. Included control software simplifies setup and operation.

Major Features and Benefits
Both the models 6220 and 6221 source 100fA to 100mA with 100fA resolution on the lowest DC current range and feature current noise as low as 80fA RMS. A reconfigurable triax output simplifies matching the application's guarding requirements. Instrument control software is available for both Macintosh and PC computers.

The Model 6221 sources AC currents from 1pA to 100mA, with 10MHz output update rate. The unit features built-in standard and arbitrary waveform generators with 1mHz to 100kHz frequency range.

Drop-in Replacement for Model 220 Current Source
The instruments also feature an emulation mode for Keithley’s earlier Model 220, which makes it easy to use a Model 6220 or Model 6221 in an existing application without rewriting any control code.

Price and Availability
The Keithley Model 6221 AC and DC Current Source is priced at $3995 (US), and the Model 6220 DC Current Source is priced at $2995 (US). Delivery is eight weeks ARO.

For More Information
For more information on Keithley's Model 6220, Model 6221, or any of its current sources or power supplies, contact the company at:

Telephone:
888-534-8453
440-248-0400
FAX:
440-248-6168

E-mail:
[email protected]

Internet:
www.keithley.com

Address:
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, OH 44139-1891

About Keithley
With more than 50 years of measurement expertise, Keithley Instruments (www.keithley.com) has become a world leader in advanced electrical test instruments and systems from DC to RF (radio frequency) geared to the specialized needs of electronics manufacturers for high performance production testing, process monitoring, product development, and research. By building upon our strength in electrical measurement solutions for research, Keithley has become a production test technology leader for the semiconductor, wireless, optoelectronics, and other precision electronics segments of the worldwide electronics industry. The value we provide to our customers is a combination of precision measurement technology and a rich understanding of their applications to improve the quality, throughput, and yield of their products.

Back to top
Posted in:
Industry

MORE INDUSTRY NEWS

VIEW ALL

RELATED