Phoenix Contact Releases User Friendly Programmable Digital Displays |

Phoenix Contact Releases User Friendly Programmable Digital Displays

Harrisburg, PA - A new line of easy-to-use Programmable Digital Displays for analog and temperature inputs is now available from Phoenix Contact. Designed for harsh industrial environments, the five-digit, high resolution LED display and easy programming features make these displays user friendly.

The displays are available in two sizes, a compact 48x24mm with supply voltages of 10 – 30V DC and a larger 96x48mm, with supply voltages of 10 – 30V DC and 90 – 260V AC. Both versions offer electrical isolation of circuits rated at 2.3kV. A programmable scaling function enables standard analog signals to be displayed as selectable physical measuring ranges.

The analog input models accept standard 0...20mA, 4...20mA, 0...10V, and bipolar inputs. A signal totalizer (integrator) mode allows the display to compute instantaneous values.

The temperature display models are designed to accept inputs from RTDs and thermocouples, as well as inputs from sensors with linear mV characteristic curves. This display allows programmable set point ranges with hysteresis. The temperature readout can be displayed in Celsius or Fahrenheit.

Additional features of the larger displays include auxillary 24V DC for powering external devices or 10V DC as excitation voltage for sensors. The larger version also features two relay outputs with freely selectable setpoint values.

Phoenix Contact Inc. Quality System is registered to ISO 9001: 2000 - Quality Systems Model for Quality Assurance in design, development, production, installation and servicing.

Information on the Programmable Digital Displays is available from Phoenix Contact Inc., Technical Service Department, (800) 322-3225; E-mail: [email protected]. Visit the company’s website at
Did you Enjoy this Article?

Check out our free e-newsletters
to read more great articles.

Subscribe Now
Back to top
Posted in: