e-con Systems Company News

News By Company, E-G

e-con Systems

e-con Systems releases eSOMiMX6PLUS System-on module
August 10, 2018

e-con Systems releases eSOMiMX6PLUS System-on module

This System-On-Module encompasses eMMC Flash whose capacity ranges from 4GB to 64GB and 64-bit DDR3 with capacity as low as 256MB to as high as 4GBytes

e-con Systems announces e-CAM130_TRICUTX2 4K camera support for NVIDIA Jetson TX1/TX2
June 08, 2018

e-con Systems announces e-CAM130_TRICUTX2 4K camera support for NVIDIA Jetson TX1/TX2

All these three cameras are connected to the base board using customized Micro-Coaxial cables. e-con Systems has designed a 30cm long Micro-Coaxial cable with connector locks at both ends, allows customers to connect both camera boards and adaptor board with no trouble.

e-con Systems introduces eSOMiMX7 System on Module
May 16, 2018

e-con Systems introduces eSOMiMX7 System on Module

As part of the “Productized Services” program of e-con Systems, the eSOMiMX7 is aimed at customer applications such as but not limited to, Building automation, test & Measurement, E-Smart Home Controls, Industrial Control, IoT Solutions, etc.

e-con Systems introduces e-CAM21_CUTX2 IMX290 CMOS Sensor based MIPI CSI-2 camera module
January 26, 2018

e-con Systems introduces e-CAM21_CUTX2 IMX290 CMOS Sensor based MIPI CSI-2 camera module

The e-CAM21_CUTX2 camera is a camera for smart applications powered by Machine Learning and Deep Learning technologies on the powerful Tegra X2 platforms including smart surveillance, smart parking and other innovative applications requiring cameras with excellent image quality

Posted in:
Product Category: 
Video Cameras
Related Portals:
Sensors & Industrial I/O, Factory Automation
e-con Systems announces See3CAM_CU135 USB 3.0 camera
June 08, 2017

e-con Systems announces See3CAM_CU135 USB 3.0 camera

With S-mount lens holder, the See3CAM_CU135 is a solution for Medical applications such as digital microscopy, Document Scanning cameras, Optical Character Recognition applications, smart surveillance, smart parking lot management applications, high-resolution Microscopic/Magnification applications, Drones etc.

Posted in:
Product Category: 
Video Cameras
Related Portals:
Vision, Factory Automation
e-con Systems announces See3CAM_81 USB 3.0 camera
April 19, 2017

e-con Systems announces See3CAM_81 USB 3.0 camera

See3CAM_81 is a solution for customers designing kiosk, multimedia applications, high resolution OCR, barcode scanning applications and medical and scientific applications such as tissue vision, pathology examination and microscopic applications.

e-con Systems introduces See3CAM_30 USB 3.0 camera
March 08, 2017

e-con Systems introduces See3CAM_30 USB 3.0 camera

The See3CAM_30 is designed for security/surveillance applications, industrial cameras and barcode scanning applications.

Posted in:
e-con Systems introduces See3CAM_130 USB camera
October 28, 2016

e-con Systems introduces See3CAM_130 USB camera

The See3CAM_130 streams Ultra HD (3840 x 2160) at 30fps and 4K Cinema (4096 x 2160) @ 30fps over USB 3.0 in compressed MJPEG format. This See3CAM_130 streams Full HD (1920x1080) at 60fps and HD

Posted in:
e-con Systems releases Tara USB 3.0 camera
July 12, 2016

e-con Systems releases Tara USB 3.0 camera

Tara is based on the 1/3-inch MT9V024, a WVGA Global shutter monochrome CMOS image sensor from OnSemi. This stereo vision camera provides synchronized sensor frames to the host machine over USB 3.0 interface.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Factory Automation
e-con Systems announces See3CAM_CU30 USB camera
February 26, 2016

e-con Systems announces See3CAM_CU30 USB camera

The ultra-low light camera captures images in near darkness.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Factory Automation, Vision
April 28, 2015

e-con Systems announces BLE stack for Windows Embedded Compact 2013

The BLE stack provides considerably reduced power consumption, size and cost while maintaining a similar communication range as the classic Bluetooth.

e-con Systems announces See3CAM 13Megapixel camera
February 19, 2015

e-con Systems announces See3CAM 13Megapixel camera

See3CAM_CU130 13Megapixel USB 3.0 camera supports Ultra HD (3840x2160) video streaming at 30fps in MJPEG over USB3.0 interface.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Factory Automation, Vision
January 28, 2015

e-con Systems introduces iOS Services for embedded devices

iOS services provide embedded device connectivity to iPad/iPhone, remote device monitoring using cloud, video streaming over WiFi Direct and other iOS applications used with embedded devices.

Posted in:
e-con Systems releases  eSOMiMX6 Computer-on-Module
December 01, 2014

e-con Systems releases eSOMiMX6 Computer-on-Module

eSOMiMX6 is a ready to use System-On-Module using Quad, Dual or Solo ARM Cortex A9 Processor running up to a speed of 1.2GHz. Price: $47.

Posted in:
e-con introduces See3CAM_CU51 camera with changeable lenses
November 11, 2014

e-con introduces See3CAM_CU51 camera with changeable lenses

The See3CAM_CU51 is based on a MT9P031 Monochrome CMOS Image sensor and has a lens mount that enables customers to choose a lens of their choice.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Factory Automation, Vision
e-con Systems announces Spica barcode scanner app
October 01, 2014

e-con Systems announces Spica barcode scanner app

Spica supports 2D barcode such as AZTEC, Datamatrix, QR Code and 1D Barcodes such as Codabar, Code 39, Code 128, EAN-8, EAN-13, UPC-A, UPC-E, UPC-E1, 128-A, 128-C, Interleaved 2-of-5 (IFT) and Ext39.

Posted in:
Product Category: 
Bar Code Scanners
Related Portals:
Automatic Identification
e-con announces e-CAM58_MI5680_MOD Autofocus camera
May 28, 2014

e-con announces e-CAM58_MI5680_MOD Autofocus camera

The camera is based on OmniVision’s OV5680, an 1/3.2” optical format, 5MP CMOS image sensor and comes with a standard 2-lane Mobile Industry Processor Interface (MIPI) Camera Serial Interface.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Factory Automation, Vision
e-con Systems  releases See3CAM_30Z10X UVC Camera
February 27, 2014

e-con Systems releases See3CAM_30Z10X UVC Camera

See3CAM_30Z10X camera is based on a 1/3” optical format, 3.0MP CMOS Image sensor and supports HD (1280x720 aka 720p) streaming at 60fps and Full HD (1920x1080 aka 1080p) streaming at 30fps.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Factory Automation, Building Automation
e-con announces See3CAM_11CUG color USB 3.0 camera
January 30, 2014

e-con announces See3CAM_11CUG color USB 3.0 camera

Being UVC compliant, See3CAM cameras are ‘plug and play’ on Windows and Linux with no additional device driver software required.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
E-con releases eSOM3730 Computer-on-Module
December 04, 2013

E-con releases eSOM3730 Computer-on-Module

The eSOM3730 is based on AM/DM37x CPU family from Texas Instruments and runs Windows Embedded Compact 2013. Price: $49.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Industrial Computers, Embedded Automation
e-con announces e-CAM51IMX6  Camera Board
October 17, 2013

e-con announces e-CAM51IMX6 Camera Board

e-CAM51IMX6 Wandboard is a 5MP full HD MIPI Camera Board, a low power complete computer based on Freescale i.MX6 Development Board. Price: $69.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Embedded Automation, Factory Automation, Vision
e-con introduces e-CAM50IMX6 camera board for Freescale
June 26, 2013

e-con introduces e-CAM50IMX6 camera board for Freescale

The e-CAM50IMX6 camera board interfaces directly to the CSI-2 MIPI interface on the Freescale SABRE Lite board. Price: $69.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Factory Automation, Vision
e-con releases See3CAM_10CUG USB 3.0 UVC cameras
April 16, 2013

e-con releases See3CAM_10CUG USB 3.0 UVC cameras

Being UVC compliant means that See3CAM_10CUG cameras are ‘plug and play’ on Windows and Linux - no additional device driver software is required and the cameras work with standard Windows (DirectShow) and Linux (V4L2) software.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Factory Automation
e-con Systems introduces e-CAM51_44x camera board
March 20, 2013

e-con Systems introduces e-CAM51_44x camera board

The e-CAM51_44x camera board for Texas Instruments’ OMAP4 family of processors can stream Full HD [email protected] and support HD [email protected]

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Factory Automation, Embedded Automation
e-con Systems releases e-CAM51_USB Camera Module
May 31, 2012

e-con Systems releases e-CAM51_USB Camera Module

USB camera has a 5-megapixel pluggable Autofocus Camera Module and supports GPIO and microphone with an integrated analog-to-digital converter.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
e-conSystems introduces Capella StereoVision Camera system
March 21, 2012

e-conSystems introduces Capella StereoVision Camera system

Capella exposes three V4L2 interfaces to application developers to capture the left, right and combined left+right video streams.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
e-con Systems Announces e-CAMNT_MX53x Video Decoder Board
February 15, 2012

e-con Systems Announces e-CAMNT_MX53x Video Decoder Board

Decoder board can be used as a plug-n-play to interface a NTSC/PAL camera with interfaces for both S-Video input and Composite video input (CVBS).

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Embedded Automation
e-con announces e-CAM52_35x camera daughter card
January 22, 2012

e-con announces e-CAM52_35x camera daughter card

Daughter card is based on OmniVision OV5640 HD CMOS Image sensor for AM37x/DM37x processors from Texas Instruments.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Embedded Automation
e-con Systems Announces e-CAM33_USB Autofocus Camera
August 28, 2011

e-con Systems Announces e-CAM33_USB Autofocus Camera

Camera is an integrated UVC and UAC solution supporting autofocus, manual focus, and GPIO functions through UVC Extension.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
e-con Systems Announces a Custom Lens Camera Board
June 26, 2011

e-con Systems Announces a Custom Lens Camera Board

The e-CAM50_CU35x_GSTIX is a 5 Mega pixel fixed focus custom lens camera solution for Gumstix Overo OMAP-based Computer on modules.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
e-con Systems Announces eImageViewer for Windows Embedded CE
June 13, 2011

e-con Systems Announces eImageViewer for Windows Embedded CE

eImageViewer addresses the most common requirements for image viewing for Windows CE and Windows Embedded Compact devices.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Embedded Automation
e-con Systems Targets Surveillance Market with Wide Dynamic Range Camera Module
April 25, 2011

e-con Systems Targets Surveillance Market with Wide Dynamic Range Camera Module

The camera module has a parallel interface and is specially targeted for surveillance and automotive applications.

Posted in:
Related Portals:
Automotive
e-con adds Windows Embedded Compact 7 to eSOM300 computer
January 06, 2011

e-con adds Windows Embedded Compact 7 to eSOM300 computer

Microsoft is scheduled to launch WinCE 7.0 in Q1 2011 and e-con Systems has the WinCE 7.0 beta version ported on the Alioth development platform.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Industrial Computers, Embedded Automation
e-con Systems announces e-CAM50_CU5642_MOD Camera Module
October 12, 2010

e-con Systems announces e-CAM50_CU5642_MOD Camera Module

Small form-factor pluggable camera module is based on Omnivision’s OV5642 sensor.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Embedded Automation
October 03, 2010

e-con Systems adds Ångström Linux

Ångström is a Linux-based distribution targeted for Embedded Devices, and thus offers all features that are used with a "desktop" distribution.



Posted in:
Product Category: 
Engineering/Development
Related Portals:
Embedded Automation
 e-con announces e-WiB wireless module
August 30, 2010

e-con announces e-WiB wireless module

e-WiB Wi-Fi and Bluetooth module works through SDIO interface and is bundled with Alioth Development platform.

Posted in:
Product Category: 
Wireless Modems
Related Portals:
Wireless Networks
 Choosing a Computer-on-Module Partner
August 08, 2010

Choosing a Computer-on-Module Partner

By E-Con

Here is a checklist to help you determine the right Computer on Module Company to partner with.

Posted in:
Posted in: 
White Papers
Related Portals:
Embedded Automation
July 19, 2010

e-con Systems signs rep in Brazil and Argentina

CKP Automacao will represent e-con’s products and design services in Brazil and Argentina.

Posted in:
Posted in: 
Industry
Related Portals:
Vision
e-con Systems Announces video processor for TI OMAP 35xx
July 07, 2010

e-con Systems Announces video processor for TI OMAP 35xx

The e-CAM50_OMAP35x camera daughter board, having a size of 8.5 X 8.5 X 5.75mm with a Omnivision OV5642 camera module, can be directly interfaced on the TI TMDXEVM3530 EVM board.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision
April 15, 2010

e-con Systems releases Alioth development kit for Computer on Module

This release is a generic platform to get customer application development started on the eSOM300 system on module.

.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Embedded Automation
e-con Systems adds OV3640 3.2 megapixel image sensor
December 04, 2008

e-con Systems adds OV3640 3.2 megapixel image sensor

OV3640 is a CMOS image sensor module that has image stabilization for capturing pictures at very low light and variable light conditions.

Posted in:
Product Category: 
Machine Vision Systems
Related Portals:
Vision, Embedded Automation
e-con Systems releases Base Board for embedded computer
October 13, 2008

e-con Systems releases Base Board for embedded computer

The base board for PXA270 system on module eSOM270 has two USB host ports, one USB client port, one SDIO interface, 3 serial ports, camera interface, LCD and touch screen.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Industrial Computers, Embedded Automation
e-con announces embedded eSOM270 with Windows CE
September 02, 2008

e-con announces embedded eSOM270 with Windows CE

eSOM270 “system on module” comes with Windows CE 5.0/6.0 and Linux support, 128M SDRAM/32M flash, and sells for $110 in OEM quantities.

Posted in:
Product Category: 
Computer Appliances
Related Portals:
Industrial Computers, Embedded Automation