Product 

Microchip Technology announces MCP6V51 zero-drift operational amplifier
January 15, 2019

Microchip Technology announces MCP6V51 zero-drift operational amplifier

The device provides precision measurement while minimizing the increasing influence of high-frequency interference by offering an operating range and on-chip electromagnetic interference (EMI) filters.

Dunkermotoren introduces SA / SC 38 series of three-phase linear motors
January 15, 2019

Dunkermotoren introduces SA / SC 38 series of three-phase linear motors

The three-phase linear motors deliver up to 3690 N and accelerate at over 200 m/s². The modular design is currently available as actuator version SA (with maintenance-free plain bearing system) and component version SC (for modules).

IFS announces IFS Field Service Management 6
January 15, 2019

IFS announces IFS Field Service Management 6

IFS’s extended offering for service management, including the WorkWave suite of solutions is designed to address the entire market, from small and medium-sized companies to global enterprises.

 Kaman Precision Products announces Extreme Environment displacement sensors and systems
January 15, 2019

Kaman Precision Products announces Extreme Environment displacement sensors and systems

With their design and all-welded and hermetic construction, the sensors and systems are suitable for rocket and turbine engine validation testing. They are also a choice for other applications, including nuclear reactors, steam and gas turbines, chemical processes, and high temperature processing.

Sensata Technologies introduces MHM5 and MHK5 Absolute Multi-Turn encoders
January 15, 2019

Sensata Technologies introduces MHM5 and MHK5 Absolute Multi-Turn encoders

These model MH encoders provide up to 16 bits per turn and 14 bits of turns counting. The packaging allows these encoders to be integrated into existing designs while an operating temperature range (-40 to +85C) and an IP65 rating makes them suitable for most industrial applications.

EXAIR introduces Gen4 Super Ion Air Wipe
January 14, 2019

EXAIR introduces Gen4 Super Ion Air Wipe

The Super Ion Air Wipe uses compressed air to entrain high volumes of room air. Two shockless ionizing points powered by a UL Component Recognized 5kV power supply fills the airstream with static eliminating ions.

Adesto Technologies announces SmartServer IoT edge server platform
January 14, 2019

Adesto Technologies announces SmartServer IoT edge server platform

Adesto’s SmartServer IoT edge server platform features built-in device and data management for sensors, meters, actuators and controllers in buildings, through various emerging and traditional protocols including BACnet, LonWorks, Modbus, and others.

DD/FDI Device Package to FDT DTM
January 14, 2019

DD/FDI Device Package to FDT DTM

Although, most of the functionalities offered by these three standards overlap, still the vendors are entailed to invest in all of these technologies to support various FDT/DD/FDI Hosts.

Posted in:
Product Category: 
Integration
Related Portals:
FDT Technology
Cimetrics announces Secured by Cimetrics cybersecurity framework
January 14, 2019

Cimetrics announces Secured by Cimetrics cybersecurity framework

Among the offerings, Cimetrics will fully implement the impending BACnet/SC (Secure Connect) into all its BACnet related products. BACnet/SC is currently in public review from the ASHRAE BACnet Committee SSPC135.

ATEN Technology introduces VP 1000 Core Series and VP2000 Collaborative Series of presentation switches
January 14, 2019

ATEN Technology introduces VP 1000 Core Series and VP2000 Collaborative Series of presentation switches

Tailor-made with features to satisfy a variety of meeting space demands and various presentation environments, the switches are available in the VP 1000 Core Series and VP2000 Collaborative Series

Thorlabs announces VEG210C1 and VEG220C1 imaging systems
January 11, 2019

Thorlabs announces VEG210C1 and VEG220C1 imaging systems

Based on Thorlabs’ MEMS‐VCSEL swept‐wavelength laser source technology, these systems are available in both 100 kHz (VEG210) and 200 kHz (VEG220) variants.

Posted in:
EGE releases STD flow controller with aseptic Varivent F process adapter
January 11, 2019

EGE releases STD flow controller with aseptic Varivent F process adapter

The thermal sensor is suitable for use in category 2 hazardous areas. It detects flow velocities between 1 cm/s and 10 cm/s in water and between 3 cm/s and 200 cm/s in oil.

Bacharach announces MGS-400 Gas Detection Series
January 11, 2019

Bacharach announces MGS-400 Gas Detection Series

The MGS-400 gas detectors support safety compliance inside of machinery rooms, mechanical equipment rooms, chiller plants, cold storage facilities and walk-in freezers by monitoring for dangerous refrigerant leaks for numerous gases including HFCs, HFOs, HCFCs, CO2, and NH3 (ammonia).

Measurement Computing Corporation releases MCC 152 voltage output and digital I/O HAT for Raspberry Pi
January 11, 2019

Measurement Computing Corporation releases MCC 152 voltage output and digital I/O HAT for Raspberry Pi

The MCC 152 features two 0-5 V analog outputs with updates rates up to 5 kS/s. Eight digital I/O lines are also included and can be configured as input or output on a bit by bit basis. Up to eight MCC HATs

Posted in:
JVL Industri Elektronik A/S introduces CiA402 Drive profile and synchronization for EtherCAT
January 11, 2019

JVL Industri Elektronik A/S introduces CiA402 Drive profile and synchronization for EtherCAT

The JVL EtherCAT module is equipped with two Ethernet connectors and a built-in switch, enabling line, star, tree and ring topology without any extra hardware. The JVL EtherCAT module has several LEDs, enabling technicians and operators to get a status overview.

ABB introduced ACH580 series of variable frequency drives
January 10, 2019

ABB introduced ACH580 series of variable frequency drives

ACH580 VFDs are integrated with ABB Ability monitoring services – ABB’s cross-industry, digital offering, which provides real-time data about drive status and performance from any location. Monitoring parameters include drives availability, environmental conditions and fault events.

Watlow releases batch processing feature for its F4T temperature and process controller and D4T data logger
January 10, 2019

Watlow releases batch processing feature for its F4T temperature and process controller and D4T data logger

The batch processing feature is designed for OEMs and end users with thermal processes who seek to collect manufacturing part processing thermal data. The F4T or D4T with batch processing automates data record entry and reports.

Mitsubishi Electric introduces MAPS 4 SCADA solution
January 10, 2019

Mitsubishi Electric introduces MAPS 4 SCADA solution

Built on a Service Oriented Architecture (SOA), the full MAPS 4 process suite delivers flexibility in handling, automating, controlling, verifying and auditing processes.

ZWSoft announces ZW3D 2019
January 09, 2019

ZWSoft announces ZW3D 2019

Being optimized and innovated on the 3D CAD platform, ZW3D 2019 is equipped with sub-assembly, this edition allows engineers to verify the motion of the whole assembly.

Bedrock Automation announces OSA Remote controller with Achilles Level 2 certification
January 09, 2019

Bedrock Automation announces OSA Remote controller with Achilles Level 2 certification

The OSA Remote embeds more than 30 cyber security technologies, including public key infrastructure (PKI) with secure keys inserted at birth, and advanced authentication and encryption capabilities for SCADA.