DeltaV Hardware & Troubleshooting Training Course | July 17, 2017 8:00 AM - July 20, 2017 4:00 PM | Automation.com

DeltaV Hardware & Troubleshooting Training Course

Event Summary

DATE:
July 17, 2017 - July 20, 2017
LOCATION:
Mansfield, MA 02048
START DATE/TIME:
July 17, 2017 8:00 AM
END DATE/TIME:
July 20, 2017 4:00 PM
EVENT TYPE:
Training
HOST:
New England Controls
PHONE:
508-339-5522
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Course #7018 CEUs: 2.8

Overview: This course provides an overview of the DeltaV Control Network, M- and S-series hardware, and software applications. Upon completion, you will be familiar with the hard-ware and be able to perform troubleshooting techniques. This 4-day course focuses on the hardware components that make up the DeltaV system: M-series controllers and I/O, S-series controllers and I/O (including CHARMs), and DeltaV Smart Switches. Using a combination of lectures and workshops, you will learn how to use operator and diagnostic tools to identify and locate hard-ware-related fault conditions. Workshops provide the opportunity to disassemble and reassemble the M- and S-series hardware and return the system to an operating state.

Topics Covered:
DeltaV Overview
Operator Alarms
DeltaV Diagnostics
DeltaV Smart Switches
DeltaV I/O Cards and Carriers
Controllers and Power Supplies
Electronic Marshalling (CHARMs)
HART I/O
DeltaV and AMS Suite Intelligent Device Manager
Redundant I/O

Prerequisites: If your systems include bus technologies such as Foundation Fieldbus, we recommend courses 7030, 7032, or 7037. The 7018 course satisfies the prerequisite requirement for these bus course (except 7032)
Dates: July 17 – July 20, 2017
Registration Deadline: Friday June 16, 2017

Location:
New England Controls – headquarters
260 Forbes Blvd.
Mansfield, MA 02048

Price: $4,275
Early Bird Special: Receive $500 off/student when you register 3 months or more in advance!

*Lunch & equipment will be provided

MORE EVENTS

  • 4th Smart Manufacturing summit

    This summit is designed as a 2-track event (Robotics&Automation and Manufacturing Excellence) to provide a platform for the key decision makers of...

  • SGTech Europe 2019

    SGTech Europe 2019 - Smart Grid Innovation Project Exchange
    3-Day Conference, Exhibition and Networking Forum
    26-28 March 2019 | Amsterdam, The...

  • PLC Training Seminar

    Start with basics move on to troubleshooting, then learn the foundations of good PLC programming while writing your first IEC-1131 compliant PLC...

  • Foam Expo North America Exhibition and Conference

    Foam Expo is North America's dedicated free-to-attend exhibition and conference for the technical foam industry.

  • ISA Toledo Section Vendor Exposition and Symposium

    Toledo ISA Exposition and Symposium, March 27, 2019, 11:00am to 6:00pm, www.isa.org/toledo. This is your best opportunity to see the newest...

VIEW ALL

RELATED