ISA and Beamex host web seminar on how to calibrate pressure instruments
January 26, 2015 - The International Society of Automation (ISA) and its Premier Strategic Partner for calibration, Beamex, will co-host a free web seminar on 19 February 2015 that will discuss advanced pressure measurement techniques and calibration using best practices.
The web seminar, the second in a two-part series on pressure measurement calibration, will be held from noon to 1:30 p.m., Eastern Standard Time, and will feature three instrumentation experts: Roy Tomalino, Calibration Engineer at Beamex; Ned Espy, Technical Director at Beamex; and Hunter Vegas, Project Engineering Manager at Wunderlich-Malec.
In a typical process plant, over 60% of instrument applications involve pressure. Pressure instrumentation maintenance is a critical and daily task, yet proper procedures for managing and calibrating these instruments are often overlooked
or not understood.
During the first segment of the series, pressure instrument experts discussed the basic concepts that drive pressure instrumentation and demonstrated how to calibrate pressure basic applications.
“In part 1 of the web seminar, we covered the most basic concepts of pressure. Now in part 2, we can review ‘real world’ applications and touch on some specific issues that technicians have to deal with on a daily basis. This webinar should generate some good discussion as well as provide helpful insight on proper maintenance and calibration of pressure instrumentation," states Espy at Beamex, Inc.
Vegas at Wunderlich-Malec goes onto say, “Have you ever wondered why your steam drum level instrument seemed to drift dramatically on start up? Or have you had a flawlessly calibrated tank level transmitter suddenly start showing an error as soon as you returned it to service? If so, then this is the webinar for you. Often the instrumentation selection and installation will make a highly accurate and consistent reading virtually impossible. This webinar will explain why and help you avoid these pitfalls.”
Together, the trio of presenters possesses more than 50 years of technical training experience. Tomalino, with more than 15 years of technical training expertise, has worked for Hewlett-Packard as a corporate trainer, and has managed new product introductions and worldwide training activities. Most recently, he served as a trainer, certified developer and technical advisor at Honeywell’s Fort Collins, Colorado office, where he supported the “DocuMint” calibration management software and Honeywell’s 2020 portable calibrator.
Tomalino received a bachelor of science degree in computer information from Regis University in Denver, Colorado, and an associate in applied science (A.A.S.) electronics technology degree from Denver Institute of Technology. Six Sigma Green Belt certified, Tomalino continues to conduct educational training sessions and provide technical support to Beamex customers.
Espy has been promoting calibration management with Beamex for almost 20 years. He has helped develop best practices for calibration, with a focus on pressure, temperature and multivariable instruments. A consistent editorial contributor to leading industry publications, Espy has received significant recognition within the automation industry. Recently, he contributed to the 416-page book, The Engineer’s Guide to Industrial Temperature Measurement. Earlier in 2014, a paper he wrote, titled “Improved Measurement and Control Utilizing Advanced Calibration Strategies,” was presented at the ISA Power Industry Division (POWID) Symposium in June. Each day, Espy teaches calibration best practices and provides technical support to end users and the Beamex sales team in North America.
Vegas has worked in the automation industry for nearly 20 years and has participated in more than 2,000 automation projects in the nuclear, pulp and paper and specialty chemical industries. He is a frequent contributor to several controls magazines and recently co-wrote, with Greg McMillan, his first book, 101 Tips for a Successful Automation Career. Vegas currently works for Wunderlich-Malec as a Project Engineering Manager.
About Beamex
Beamex is a leading, worldwide provider of calibration solutions that meet even the most demanding requirements of process instrumentation. Beamex offers a comprehensive range of products and services--from portable calibrators to workstations, calibration accessories, calibration software, industry-specific solutions and professional services. Through Beamex’s subsidiaries, branch offices and an extensive network of independent distributors, the company’s products and services are available in more than 80 countries. Beamex has more than 10,000 customers worldwide.
About ISA
Founded in 1945, the International Society of Automation is a leading, global, nonprofit organization that is setting the standard for automation by helping over 30,000 worldwide members and other professionals solve difficult technical problems, while enhancing their leadership and personal career capabilities. Based in Research Triangle Park, North Carolina, ISA develops standards; certifies industry professionals; provides education and training; publishes books and technical articles; and hosts conferences and exhibitions for automation professionals. ISA is the founding sponsor of The Automation Federation.

Check out our free e-newsletters
to read more great articles.
- Posted in:
- Event
- Related Portals:
- ISA Automation Week, Plant & Asset Management, Process Automation, Process Instruments, Field Devices & IO
MORE EVENT NEWS
-
Rockwell Automation to showcase connected water control and monitoring solutions at WEFTEC
Rockwell Automation will feature its smart solutions through a simulated digital control room where attendees will have a chance to see the latest...
-
ABB to highlight ABB Ability solutions at CEPSI 2018 in Malaysia
Highlights from ABB’s showcase include solutions that can enable digitalization and enhance the grid, in line with this year’s conference...
-
Seeq to sponsor Ignition Community Conference
The ICC is hosted by Inductive Automation for partners and customers of the Ignition SCADA system.
-
Bitflow announces "Imaging Technologies in Food and Beverage Inspection" webinar
Participants will have an open and candid discussion with two experts in the machine vision industry -- Raf Vandersmissen, Product Manager at...
-
ABB announces UK Switch to Robots seminar
The seminar provides a step-by-step guide to the key issues around specifying, installing and operating a robot, including how to assess which...
RELATED
-
Carnegie Mellon research aims at identifying causes for defects in 3D Printing
New research published today in Science, led by researchers from Carnegie Mellon University and Argonne National Laboratory, has identified how and...
-
Inside the Advantages of Sensorless Closed Loop Control
By Mark Checkley, KEB Automation
While feedback devices may be the usual choice for control of motors, sensorless closed loop control can provide... -
ISA announces release of Fluid Mechanics of Control Valves: How Valves Control Your Process
The book reflects the latest understanding of how fluid mechanics and acoustics affect control valve performance.
-
Maplesoft and Sigmetrix announce direct operations in China
The two Cybernet Group companies now have an office in Shanghai that is staffed by local experts to provide products and solutions to their...
-
Mobile Safety in Hazardous Areas
By Pepperl+Fuchs
Mobile devices can solve many challenges in hazardous industrial environments. But a device that lacks the proper protection...