Safety Instrumented Systems: Design, Analysis & Justification (EC50) | May 11, 2015 8:00 AM - May 14, 2015 4:00 PM | Automation.com

Safety Instrumented Systems: Design, Analysis & Justification (EC50)

Event Summary

DATE:
May 11, 2015 - May 14, 2015
LOCATION:
Houston, TX 77042
COUNTRY:
United States
START DATE/TIME:
May 11, 2015 8:00 AM
END DATE/TIME:
May 14, 2015 4:00 PM
EVENT TYPE:
Training
HOST:
aeSolutions
PHONE:
8644043074
EMAIL:
[email protected]
WEBSITE:
Click here to Visit

Description

Length: 4 days

CEU Credits: 2.8
Course Hours: 8:00 a.m. - 4:00 p.m.
Course: $2505

This course is required for the ISA84 SIS Fundamentals Specialist Certificate Program

Description:
This course focuses on the engineering requirements for the specification, design, analysis, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA 84 (IEC61511) standard.

This course is required for the ISA84 Safety Instrumented Systems Certificate Programs. You can register for the exam through ISA after completing the course.

Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist.

You will be able to:
Differentiate between process control and safety control
Implement the ISA84 (IEC 61511) standard
Evaluate process risk levels
Select Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques
Analyze the performance of different logic system technologies
Analyze the performance of various sensor, logic, and final element configurations, as well as the impact of diagnostics, test intervals, common cause, system size, imperfect manual testing, and bypassing
Determine optimum system test intervals
Specify and select safety instrumented systems
Apply the documentation requirements for process safety management, regulations, and industry standards
You will cover:
Introduction: Accidents and Resulting Regulations | Lessons Learned From Past Accidents | Standards & Guidelines of Interest
Scope & Safety Life Cycle: Management Issues | Design Life Cycle |
Safety Layers: Independent Safety Layers | Separation of Control and Safety
Risk, Hazard Analysis, Safety Integrity Levels: Hazard Identification | Risk Assessment | Selecting Safety Integrity Levels | Layer of Protection Analysis
Failure Modes & Reliability Concepts: Safe vs. Dangerous | Failure Mode vs. Technology | Failure Rates | Modeling Techniques | Test Intervals | Fault Tolerance Requirements
System Technologies: Pneumatic | Relay | Microprocessor | Field Devices | Certification | Prior Use
System Design: Requirements Specification | General Design Issues (Environment, Interfaces, Bypasses, Resets, etc.)
Operations and Maintenance: Installation | Operation & Maintenance | Testing | Management of Change | Decommissioning
Classroom/Laboratory Exercises:
Calculate device failure rates
Model system performance for relay and software-based logic systems
Model the impact of different configurations, field devices, automatic diagnostics, manual test intervals, common cause, and imperfect manual testing and bypassing
Determine the SIL (safety integrity level) of a sample functions and design a system to meet the performance requirements
A hand-held/scientific calculator should be brought to class.

Recommended Resources: Safety Instrumented Systems-Design, Analysis and Justification, 2nd Edition

Includes ISA Standards:

ANSI/ISA-84.91.01-2012: Identification and Mechanical Integrity of Safety Controls, Alarms, and Interlocks in the Process Industry
ANSI/ISA-84.00.01-2004, Part 1: Framework, Definitions, System Hardware and Software Requirements
ANSI/ISA-84.00.01-2004, Part 2: Functional Safety: Safety Instrumented Systems for the Process Industry Sector
ANSI/ISA-84.00.01-2004, Part 3: Guidance for the Determination of the Required Safety Integrity Levels - Informative

MORE EVENTS

  • Green Datacenter Conference

    Green Datacenter Conference will feature all new talks, and interactive sessions designed to help you implement secure, efficient data center...

  • PLM Certificate Program

    For 35 years, CIMdata has been working in the Product Lifecycle Management (PLM) industry. Our consulting services and research expertise are known...

  • Tire Technology Expo 2019

    Tire Technology Expo is Europe's most important tire manufacturing technology exhibition and conference. Exhibits cover the complete spectrum of...

  • Industry of Things World USA

    The Industry of Things World team invites you to connect with over 500 Industrial Internet experts on Mar 07-08, 2019 at the Marriott Marquis San...

  • CEE GAS

    The CEE region of countries, from the Baltics to the Balkans, is undergoing a process of profound change in terms of its interconnected energy...

VIEW ALL

RELATED