JVL announces Add-on Instructions for Rockwell Automation’s Studio 5000 software setup | Automation.com

JVL announces Add-on Instructions for Rockwell Automation’s Studio 5000 software setup

January 072019
JVL announces Add-on Instructions for Rockwell Automation’s Studio 5000 software setup

January 7, 2019 – JVL is now releasing Add-On-Instructions for setup and programming in Rockwell Automation’s Studio 5000 software. 

All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option.  The integrated design with the controller in the motor minimizes the size of the control cabinet.  With less components in the cabinet, the cooling requirements will be lower..

JVL’s closed-loop ServoStep technology ultra-high torque enables direct drive without gearing.  The motor series also has current control, which lowers power consumption and allows 100% duty cycle without overheating.  The step resolution of 409,600 step/rev decreases acoustic noise and results in a smooth-running motor.

The wide speed range from 0 to 3000 rpm can be adjusted in increments of 0.01 rpm. 

The motors have 8 programmable inputs/outputs: each can be set up as digital input, digital output or analog input. Motors are equipped with EtherNet/IP interface and as option you can choose STO (Safe Torque Off) versions.

The motors are designed for multi-axis applications and format adjustments where high positioning speed is required. Due to ultra-high torque, no gear is needed.

For end-of-line packaging and food and beverage applications enclosure class IP65 can be delivered.

To fulfil the demands for diagnostics and maintenance in factories of the future the motors are designed for IIoT and are Industry 4.0 ready.

The motors include a 2-port Ethernet switch to reduce wiring in daisy-chain configuration (DLR). Several LEDs enable technicians and operators to get a quick status overview.

The motors have the ability to be upgraded with other protocols or newer versions of the same protocol at any time. Because of the upgradeability, the JVL industrial Ethernet interface is also ‘future proof' as newer versions of the protocols will always fit into the design. The user can switch between Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS.

MORE PRODUCTS

VIEW ALL

RELATED