Zero-Max's New CD® Coupling Sizing & Selection Software Has 3D CAD Models.

Now containing 3D CAD models, this new Zero-Max software provides the ideal component recommendation for a given set of operating requirements. Software users are guided through a few easy steps at their computer to select the right Zero-Max CD coupling. They enter coupling RPM needed, peak torque, angular, axial and parallel misalignment, service factor and the shaft sizes.
The program then gives the recommended coupling model in the appropriate size, showing all operating parameters for that particular coupling. Data such as torsional and axial stiffness, moment of inertia, maximum speed, operating torque and maximum allowable angular, axial and parallel misalignment are shown along with 3D drawings.
The software is available FREE for all Zero-Max CD coupling models that are designed for cyclic applications where speed and repeatable accuracy are critical in 24/7 environments, and for Zero-Max Servo Class high misalignment servomotor couplings.
Call 1-800-533-1731 for a FREE CD ROM of this sizing software. Outside US and Canada, call 763-546-4300. Or go to www.sizingcd.com/3933.
Write to Zero-Max, 13200 Sixth Avenue North, Plymouth, Minnesota 55441-5509. Fax: 763-546-8260. Email: [email protected].

Check out our free e-newsletters
to read more great articles.
- Posted in:
- Resources
- Related Portals:
- Design & Simulation Software, Factory Automation
MORE RESOURCES
-
Interact Analysis Report: Industrial robot market slows in 2019
Compared to 2017, where revenues associated with industrial robots increased by 20%, forecasted declines of 4.3 per cent in 2019 have caused some...
-
Industrial Internet Consortium and oneM2M release whitepaper on Advancing the Industrial Internet...
The joint whitepaper, “Advancing the Industrial Internet of Things,” written by the IIC and oneM2M, demonstrates how these two IoT...
-
Association for Advancing Automation Report: North American machine vision market down in 2019
Machine vision systems saw a decrease of 2% year over year, at $599.9 million. This category includes smart cameras and application specific...
-
ODVA announces enhancements to EtherNet/IP Specification
The published enhancements to The EtherNet/IP Specification outline integration of NAMUR NE 107 diagnostics for process automation into CIP...
-
IDTechEx Report: Autonomous cars could accout for 4 trillion miles of road travel by 2040
IDTechEx has recently seen competitors joining hands and forming some unlikely-sounding alliances to reduce the cost of autonomous driving...
RELATED
-
IFR Report: Korea hits record 300,000 industrial robots
Within five years, the country has doubled its number of industrial robots. Following Japan and China, the country ranked third in 2018. But the...
-
ARC Advisory Group Report: ABB leads DCS market for 20th consecutive year
According to the report, ABB’s presence in many end-user industries was a major factor in this success. The DCS market saw its main growth in oil...
-
Litum IoT helps Ferrero Group enhance worker tracking
Ferrero needed a way to confirm that all its employees could be safely accounted when an emergency evacuation was underway.
-
The Death of the Family Album: Specifying the right cleanroom environment
By Mark Howard, EU Automation
It is vital to understand how cleanrooms truly operate if you are to get the best out of yours. This article... -
NUM announces opening of Indian office
NUM AG has opened a branch in Bangalore in November 2019. With this expansion in Asia, the international company with headquarters in Teufen,...