Prairieville, LA (July 19, 2004)- K-TEK, a leading manufacturer of state-of-the-art level instrumentation for liquid detection, today announced the new MT2000 Wave Guide Model C9P81. The MT2000 uses guided wave radar to make measurements, which means no moving parts and, therefore, virtually no maintenance. A waveguide directs the microwave pulses, eliminating the beam divergence problems common to conventional non-contact radar transmitters.The new C9P81 Waveguide is designed specifically for saturated steam applications, such as those found in power generation plants and industrial heat processes. The C9P81 Waveguide features an alumina ceramic insulator that allows accurate and reliable measurements up to 2000 psi (138 bar) at 635šF (335šC). "Unlike traditional contact devices, such as displacers, the C9P81 Waveguide does not depend on fluid density to make measurements," stated Robert Hotard, Product Manager for Radar and RF products at K-TEK Corp. "As a result, readings do not fluctuate with shifts in the specific gravity of the fluid and are not subject to variations in dielectric constants. This allows for significantly tighter control throughout the steam cycle, from boilers to feedwater heaters to de-aerators."Widest Selection of Materials & Certifications The MT2000 level transmitter features the industry¹s largest selection of probe materials, including 316 Stainless Steel, 304 Stainless Steel, Hastelloy, Monel, and Titanium. This means the instrument works even under the harshest conditions, including high temperatures, high pressures (saturated steam), or corrosive environments, such as hydrochloric acid.The standard housing for the MT2000 is powder-coated aluminum; an optional stainless steel housing handles corrosive environments. A dual-compartment design allows users to isolate the wiring and terminations from the sensing elements and internal electronics. FM Approved and CSA Certified for use in hazardous areas, the MT2000 is also ATEX certified for use in potentially explosive atmospheres.With virtually no beam divergence and, therefore, no false echoes, the MT2000 is ideal for use in vessels with complex, internal structures or even small, tight spaces, such as existing displacer chambers and stilling wells that can be found in refineries, chemical plants, and power generation facilities.High Accuracy & LinearizationThe MT2000 provides the highest accuracy readings in the industry at ±0.20 inches (5.1 mm). With traditional contact measurement devices, such as displacers or floats, the specific gravity of the fluid being measured varies with temperature and pressure. This results in varying accuracies.The MT2000¹s guided wave radar, on the other hand, is unaffected by variations in specific gravity. The instrument provides accurate height measurements even with widely varying temperatures and pressures. The MT2000 configured with the Model C9P81 Waveguide is designed specifically for saturated steam applications and can handle up to 2000 psi (138 bar) at 635šF (335šC). The MT2000 family of level transmitters is the only one in the industry to provide built-in linearization functions. This allows users to minimize the unmeasurable or "dead" zones that can occur at the end of probes. While competitive products assume standard dead zones, all MT2000 incorporate a linearization table.The MT2000 probes can be customized for retrofitting into existing stilling wells and displacer chambers, from 2 20 feet. Output is via 4-20 MA, HART, or Honeywell DDE. Results are displayed locally with a built-in, scrolling LCD panel that offers measurements in a field-selectable choice of feet, inches, millimeters, centimeters, meters, or percent.Pricing & Delivery K-TEK's MT2000 Guided Wave Radar Level Transmitters are available for immediate shipment. Prices start at $1325. The C9P81 Waveguide option is priced at $1000. Delivery is two weeks from receipt of order.About K-TEK K-TEK is a leading manufacturer of state-of-the-art level instrumentation for liquid and bulk solids detection. Founded in 1975, the company pioneered the KM26 magnetic level gauge with extruded outlets and continues to set the pace in the industry with such innovations as AccuTrak, the first Fieldbus-compatible magnetostrictive level transmitter, and SureShot, the first low cost, all digital design laser level and distance transmitter. The company also manufactures magnetostrictive level transmitters, guided wave radar transmitters, ultrasonic transmitters, and a full line of point level switches, plumb bob devices, and field controllers. K-TEK's products are used in over 175,000 installations worldwide in such applications as plastics manufacturing, chemical processing, oil and gas production, pulp and paper processing, mining and construction, food and beverage manufacturing, and power generation. For more information, please visit www.ktekcorp.com.
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..
