AXIOMTEK Offers A Wide Range of Network Appliances to Boost Network Performance
Taipei, Taiwan, December 29, 2005 AXIOMTEK is a leading server appliance hardware platform development and manufacturing partner for software solutions and fine appliance product providers. For the sake of meeting numerous critical network appliance demands, AXIOMTEK offers a wide range of network appliances to fulfill network management and network security hardware solutions. The Network Appliances (NA) series is ideal for System Integrators, software developers, and manufacturers seeking to reduce time to market.Each of AXIOMTEKs Network Appliance models have a lower total cost of ownership (TCO) and can be used for VPN gateways, load balancing, network bandwidth management, SSL, firewalls, IDS/IPS, and much more. Partner with AXIOMTEK for all your network appliance development needs, and we will take care all your hardware needs to optimize customers network business.NA-0043This platform is an ultra low power, mobile, small form factor, and easily integrated platform for internet-enabled devices. The NA-0043 network appliance platform makes outstanding use of a ULV (Ultra Low Voltage) Intel® Celeron® M processor with an Intel® 852GM North Bridge chipset. It supports up to a total of four 10/100Mbps Ethernet ports and supports extreme data transaction performances in a network layer. For system log-ins with monitoring and building control proxies, the NA-0043 has space for a 2.5 hard drive for software porting by software solution providers. The platform is optimized best for data communication and it can be configured to fit different customer requirements accordingly. It also supports a LAN by-pass function definition for power lost, and OS or application program boot-up failure, to make sure there is no downtime. Finally, the NA-0043 also supports Pentium M CPUs which speeds up process performance. NA-1301The NA-1301 supports high performance Intel® Pentium ® M processors, which have an Intel® E7501North Bridge chipset. Through the Intel® 82546 and Intel® 82540 Gigabit Ethernet controller, the platform offers three Gigabit Ethernet ports. The LAN1 and LAN2 ports support Gigabit copper or fiber connections (per customers request). The ports support high networking transfer rates through a PCI-X 64-bit/100MHz bus. The LAN3 port supports a 32-bit/33MHz PCI interface and can be a managed port in the appliance platform. The NA-1301s system memory can support up to 4GB of DDR SDRAM. Because of the its low power consumption and commercial server block infrastructure, the NA-1301 is very suitable for firewall applications in inter-building, campus network and long-haul network environments. NA-1801Supporting new generation Intel® Pentium ® 4 processors (Prescott) with Intel® 875P North Bridge chipsets, the NA-1801 supports up to a total of eight Gigabit Ethernet ports and supports extreme data transaction performance in a network layer. This 1U extreme slim platform is optimized best for data communication. The Ethernet port configurations and combinations can be changed to fit different customer requirements accordingly. The NA-1801 supports a LAN-by-pass feature for abnormal status. It can support different by-pass levels with this feature such as power, BIOS boot, OS and application program failures. Option feature is for customer firmware downloading by SMbus EEPROM! To off-load the CPU utilization and to speed up the VPN encryption/decryption performance, the NA platform also features one PCI-X 64-bit/66MHz slot for VPN encryption boards or any compatible feature card expansions. NA-2701The NA-2701 series has extreme computing capability with hyper-threading technology in the dual processor configuration. The network appliance platforms, NA-2701A & NA-2701B (NA-2701 series), support Intel® Dual Xeon® processors with an Intel E7501 North Bridge chipset. They feature a 2U form factor, and support redundant power supplies without down time. The NA-2701A supports a total of seven Gigabit Ethernet ports with copper connectors. As for the NA-2701B, it can support four Gigabit fiber connections and three Gigabit connections with copper; the fiber connection utilizes Mini-GBIC SFP interfaces. It can be deployed with multi-mode or single-mode fiber transceivers to fulfill the different customer environment needs! A powerful enclosure management BIOS features is also included, such as BIOS to console port, LCM setting functions, and so on, which can help customers to easily manage their systems. For system logs with monitoring and building control proxy, the Network Appliance has space for two 3.5 hard drives, which can be used for software porting by software solution providers. The platform can support very critical environments. The devices can be used in enterprise-sized networks, campus networks, and Metropolis Area Networks for secure data purposes.The above platforms are available now. To obtain more product information or pricing by visiting its website.About AXIOMTEK Co., Ltd.AXIOMTEK Co., Ltd. is one of the world's leading designers/manufacturers of PC-based industrial computer products. From its roots as a turnkey systems integrator specializing in data acquisition and control systems, AXIOMTEK has mirrored the PC evolution in various industries by shifting its focus toward the design and manufacture of PC-based industrial automation solutions.AXIOMTEK was established since 1990. The company has 260 employees in headquarter and subsidiaries in USA, China, Germany and France, with more than 80 employees in total. The company has appointed more than 60 distributor partners around the globe. AXIOMTEK offers IPC (Industrial PCs), ECP (Embedded Computing Platforms), PPC (Panel PCs), DAS (Data Acquisition Solutions), NA (Network Appliances) and Storage Solutions product lines with more than 400 items.
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..