- November 16, 2011
- Emerson Automation Solutions
- Case Study
Korsn√§s G√§vle is using Emerson‚Äôs wireless conductivity and temperature transmitters to collect leak-detection data at its board and paper production unit at G√§vlebukten, Sweden.
November 16, 2011 - Korsnäs Gävle is using Emerson Process Management’s Smart Wireless conductivity and temperature transmitters to collect critical leak-detection monitoring data at its board and paper production unit at Gävlebukten, Sweden. Improved monitoring enables the company to verify its compliance with environmental monitoring legislation. Water from heat exchangers at the Gävlebukten plant is carefully monitored prior to its return to the sea. Small internal leaks may result in the discharge of hazardous chemicals into the local environment. Any leak of acids, bases, or salts will raise the electrical conductivity of the water and is easily detected using a conductivity sensor. A renovation project within the utilities section meant that I/O supporting existing instrumentation was to be removed. Korsnäs Gävle therefore needed an alternative way to transmit the required measurements to the main control room. “Initially we considered installing new cable runs, but the process would have taken too long and would have delayed the planned renovation project.” said Peter Hallenberg, Project Leader Process Automation, Korsnäs Gävle. “The application presented a great opportunity for us to install and evaluate Emerson’s Smart Wireless technology, which takes advantage of the IEC 62591 (WirelessHART) communication standard.” The Smart Wireless solution that Korsnäs Gävle installed includes a Rosemount Analytical 6081-C transmitter connected to a conductivity probe. The transmitter sends the measurement data via a Smart Wireless Gateway to the existing control and data acquisition systems, where it is used to ensure compliance with the environmental monitoring legislation. Korsnäs Gävle also needed to establish new continuous monitoring of emissions from aerated basins and ponds. Twenty-two new sensors measuring pH, dissolved oxygen, and water temperatures had to be installed and connected to the central monitoring system. There were no available cable runs, and new cable infrastructure presented a considerable challenge and cost at €200 per meter. To meet this challenge, Korsnäs Gävle installed six Rosemount wireless transmitters, each with four available inputs, to relay data from the analytical sensors. The wireless instruments provide the necessary data to meet the environmental requirements. “Less than two months after ordering the Smart Wireless devices, the whole system was fully operational. That is very fast for implementing 30 new measurement points,” said Hallenberg. “Now that the network is in place,” he added, “we have also found that adding additional devices becomes very simple.” Specifically, Korsnäs Gävle has installed seven Rosemount 648 wireless temperature transmitters to automate the monitoring of water temperatures in wastewater pits that feed the aerated basins and ponds. A further eight Rosemount wireless transmitters will be installed to identify plugged filters on two wood chip digesters within the main processing section of the plant. About Emerson Process Management Emerson Process Management, an Emerson business, is a leader in helping businesses automate their production, processing, and distribution in the chemical, oil and gas, refining, pulp and paper, power, water and wastewater treatment, mining and metals, food and beverage, life sciences, and other industries. The company combines superior products and technology with industry-specific engineering, consulting, project management, and maintenance services. Its brands include PlantWeb, Syncade, DeltaV, Fisher, Micro Motion, Rosemount, Daniel, Ovation, and AMS Suite.Learn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe