- July 14, 2011
- Rotork PLC
- Case Study
Rotork actuators are providing valve control on new gas dehydration units constructed at seven sites in the Transylvanian region of Romania.
July 14, 2011 - Rotork actuators are fulfilling the all-electric specification for valve control on new gas dehydration units constructed at seven sites in the Transylvanian region of Romania. The new plants have been built for Romgaz, the largest natural gas producer in Romania, responsible for the production of around 40% of the country’s consumption. Dehydration plants use triethylene glycol to remove the water from natural gas in order to prevent downstream processing problems such as freezing, corrosion and the formation of hydrates.
The specification for the new plants ruled out the use of air instruments and compressors, dictating the use of explosionproof electric actuators for isolating and control valve duties in the hazardous areas. This has been achieved with ATEX certified Rotork IQT isolating valve actuators and CVA control valve actuators. Both designs feature intrinsically safe, non-intrusive setting and configuration technologies, data logging for diagnostics and preventative maintenance planning, and double-sealed watertight environmental protection. The CVA offers a highly accurate and responsive method of automating control valves, without the complexity and cost of a pneumatic supply. With resolution figures better than 0.1% and the ability to eliminate position overshoot, the CVA helps to maximise product quality and plant capacity.
The electrical supply to the dehydration units is secured by means of a three-tier failsafe system comprising mains power supported by a 30kVA uninterruptable power supply and a 45kVA natural gas powered generator. Centralised control is provided by a Cytect SCADA system and ABB plc, housed in a control room adjacent to each plant. In addition, an Eex-e certified PC with mimic panel and identical graphical interface is located within each plant, enabling operators to work on the system in the field as well as the control room.
The main contractor for the project is Armax Gaz in Romania. Italian companies Pietro Fiorentini and TNC Tecnoconsulting have been responsible respectively for the process and base engineering and the automation and electrical devices, whilst a total of 76 IQT and 41 CVA actuators have been supplied by Rotork Italy.Learn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe