- December 20, 2012
Ex-e GHG 410 range of safety and isolating transformers are suitable for use in potentially explosive atmospheres.
December 20, 2012 - Cooper Crouse-Hinds gained ATEX and IECEx approvals for its Ex-e (increased safety) GHG 410 range of safety and isolating transformers. These transformers are suitable for use in potentially explosive atmospheres. Available in power consumptions from 63 VA up to 1200 VA, the single phase Ex-e safety and isolating transformers are approved for use in potentially explosive atmospheres to BVS 11 ATEX E195 U and IECEx BVS 11.0087 U. Safety and isolating transformers are used for the power supply of control circuits. The use of these transformers is stipulated in the EN 61558-2-1 standard. This requires the use of safety and isolation transformers if more than five operating coils are used in one circuit. The benefits of using safety and isolation transformers are that they safeguard the application against direct and indirect contact; they allow easy modification of different mains voltages; and they provide short circuit current limiting to protect the operating equipment. The Ex-e GHG safety and isolating transformers are suitable for use in ambient temperatures from -55 deg C to +130 deg C. The Ex-e transformer needs to be mounted into a separate certified empty enclosure with IP66 protection. The terminals on the transformers are separately certified to PTB 01 ATEX 1049 U, PTB 01 ATEX 1050 U, or PTB 01 ATEX 1051 U. About Cooper Crouse-Hinds Headquartered in Syracuse, N.Y., Cooper Crouse-Hinds is a subsidiary of Cooper Industries plc (NYSE: CBE) that integrates a comprehensive line of electrical and instrumentation products with expert support, industry insights and local availability, engineering safety and productivity in the most demanding industrial and commercial environments worldwide. Cooper Crouse-Hinds manufactures over 100,000 products, including conduit and cable fittings; enclosures; plugs and receptacles; industrial lighting fixtures; signals and alarms; controls and electrical apparatus; commercial outlet boxes and hubs; and electronic components and protection equipment for process control branded MTL Instruments Group. Cooper Crouse-Hinds products are sold worldwide and meet all local and international code requirements. They are used in general construction or in harsh and hazardous environments across the globe, performing to the highest standard of safety and reliability.Learn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe