- August 07, 2012
- Teledyne DALSA
The image sensors for the Curiosity's Navcams and Hazcams were built in Teledyne DALSA's Bromont, Quebec, semiconductor foundry.
August 7, 2012 - The image sensors for the Curiosity's Navcams and Hazcams were built in Teledyne DALSA's Bromont, Quebec, semiconductor foundry, as were those on the previous Spirit and Opportunity rovers. The hazard avoidance cameras are installed on each corner of the rover and the 3D stereoscopic navigation cameras are part of the rover's camera mast. These image sensors represent only a part of Teledyne's overall contributions to the launch, landing, and operation of the mission. No fewer than five Teledyne companies contributed components crucial to the mission's success:
- Teledyne Energy Systems, Inc. (TESI) developed the thermoelectric system that powers the rover. TESI's Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) converts the heat of plutonium decay into electric power with no moving parts. It can produce 125 watts of electrical power from 2000 watts of thermal power for up to 14 years. TESI is currently under contract to manufacture MMRTG units to power upcoming NASA missions to the outer planets.
- Teledyne Microelectronics manufactured for JPL two complex radio frequency (RF) modules (Transmit/Receive and Up/Down Module) for the MSL. These modules are part of the terminal descent and landing unit which played a major role in the last critical 30 seconds of the lander's approach to Mars.
- Teledyne Relays supplied electromechanical relays used on Curiosity's communication suite. The company supplied similar components for the earlier Spirit and Opportunity rover.
- Teledyne Impulse supplied electromechanical power transfer switches that were used on the Atlas V rocket that launched the mission.
"It gives me great pride to be able to contribute to a project that poses such technical challenges and holds such promise for the advancement of science and knowledge," observed Robert Mehrabian, chairman, president and chief executive officer of Teledyne. "I am also delighted to see how many ways and in how many places Teledyne contributes. From the deepest parts of this planet's oceans to the mountains of Mars and out past the edges of our solar system, Teledyne technology enables exploration, analysis, and communication." About Teledyne Technologies Teledyne Technologies is a leading provider of sophisticated instrumentation, digital imaging products and software, aerospace and defense electronics, and engineered systems. Teledyne Technologies' operations are primarily located in the United States, Canada, the United Kingdom and Mexico. About Teledyne DALSA Teledyne DALSA, a Teledyne Technologies company, is an international leader in high performance digital imaging and semiconductors with approximately 1,000 employees worldwide, headquartered in Waterloo, Ontario, Canada. Established in 1980, the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing specialized semiconductor products and services including MEMS.Learn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe