Endress+Hauser Announces October Training Schools

Summary

July 22, 2013—Endress+Hauser announces its October 2013 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions. For information on all E+H training schools, go to: http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-instrumentation-training Courses include: Basic Flow School October 4, 2013 in Chalfont, Pennsylvania The Endress+Hauser F104 Basic flow course is applicable to virtually any manufacturer’s equipment. It provides maintenance and engineering personnel with a basic understanding of numerous flow technologies and operating principles, including magnetic and Coriolis flow meters. The class will be a combination of classroom and hands-on training. http://www.cvent.com/events/f104-1-day-basic-flow-school-chalfont-pa/event-summary-af471c12fa4247458306d32b4afbd2b4.aspx Basic Instrumentation School October 7-11, 2013 in Mobile, Alabama The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic Liquid Analytical Measurement School October 9-10, 2013 in Matthews, North Carolina The Endress+Hauser A-102 Liquid Analytical Measurement School provides maintenance and engineering personnel with a basic understanding of numerous analytical technologies, including pH, conductivity and chlorine monitors that apply to virtually any manufacturer's equipment. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/A102 Flow School - Introductory October 14-16, 2013 in Memphis, Tennessee The Endress+Hauser F-101 introductory course on flow measurement will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flow meters that apply to virtually any manufacturer's equipment. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~flow-instrumentation-training Flow School - Introductory October 22-24, 2013 in Matthews, North Carolina The Endress+Hauser F-101 introductory course on flow measurement will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flow meters that apply to virtually any manufacturer's equipment. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~flow-instrumentation-training Flow School Coriolis October 23, 2013 in Gonzales, Louisiana The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103 Open Space & Guided Wave Radar Level School October 25, 2013 in Gonzales, Louisiana The Endress+Hauser L-104 Radar Level School is an introductory course (8 hours) on Open Space and Guided Wave Radar Level for maintenance and engineering personnel. The course dedicates a half day to each technology to give a basic understanding of these level technologies. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~Radar-Level-Training Certified PROFIBUS PA Engineer Training October 28-31, 2013 in Greenwood, Indiana The Endress+Hauser C-201 Certified PROFIBUS PA Engineer Training is an intensive hands-on and theoretical 4-day, 24-hour training program. Upon successful passing of the final examination the participant will receive a certificate and the right to bear the title "Certified PROFIBUS PA Engineer." All successful participants will be listed on the official PROFIBUS homepage. http://www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/C201 About the Endress+Hauser Group Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. The Group employs more than 10,000 personnel across the globe, generating net sales of almost 2.3 billion dollars in 2012. Endress+Hauser supplies sensors, devices, systems and services for level, flow, pressure and temperature measurement as well as liquid analysis and measured value recording. The company supports its customers with automation, logistical and IT services and solutions. About Endress+Hauser in the U.S. Endress+Hauser is one of the largest instrument manufacturers in the United States’ industrial automation industry – specializing in automation solutions for the Chemical, Food & Beverage, Oil & Gas, Water and Wastewater, Life Sciences, Power and Energy, Primaries, and Pulp and Paper Industries. Endress+Hauser, a Switzerland based company, first began operations in the U.S. in 1970. Since that time, Endress+Hauser has continued to invest in its U.S. operations - investing an average of 10% of its annual revenue into its infrastructure.