- October 11, 2013
- Case Study
SIC Marking created a mechanical system of loading plates on the marking machine for laser marking of the product name, customer's number, serial number and barcode.
October 11, 2013 - Parker Hannifin'S Vierzon plant in France is a specialist in manufacturing hydraulic pumps, vane and motors. They are dedicated to the rail industry, marine, mobile vehicles (on wheels or on tracks), the military and environment. The site employs 220 people.
"The engraving of the product's plate was carried out by one dedicated operator. It was a very manual task and we wanted to find an automated solution to relocate the operator to another post. When we discussed our marking requirements with SIC Marking, they clearly understood our exact application requirements and proposed the best solution. Because of thedimension of the parts, the gripping of the pieceswas a problem. The solution was to put the plates on a tray without all the handling involved," explains M. Marchand, of Parker Hannifin. The plates serve to identify motors and pumps produced on the site. These are blue anodized aluminium plates of 0,5 mm of thickness. They contain the following information: the product name, the customer's number, the serial number and the barcode. “SIC Marking has created a mechanical system of loading plates on the marking machine. The plates are stacked on three chargers in size order. Then, they are lifted by a finger, and positioned for marking. The operation is difficult because the plates are very thin. The presence/absence is controlled. It just needs to re-launch the program and replenish the pieces store ,” adds M. Marchand. The laser marking machine proposed by SIC Marking is the i103l-g, ideal for the traceability and identification of parts.This equipment is designed to mark at high speed with low operating and maintenance costs. Very robust, the laser machine allows marking on all metallic material (steel, aluminium, stainless steel, titanium,...) and most plastic parts. The laser source is a Ytterbium YB 20W doped fiber laser. This solution accommodates the multiple part sizes. The dimension of the plates used by Parker Hannifin are 80x35x0,5 mm with 4 fixation holes, 58x35x0,5 mm with 4 fixation holes and 76x25x0,5 mm with 2 "T" holes. The marking window is 100×100 mm, which can cover all the customer needs.
The equipment comes with the SICLASER software. It allows the editing and creating of marking folders in Windows. It also allows the integration of the Parker Hannifin database. The variables are transmitted to a controller that manages the marking cycle. Finally, the management in stand-alone, the test Mode (marking tests) and the Diagnosis can be done. The i103l-g laser marking system communicates via RS232 or Ethernet and by E/S TOR (stand-alone card that permits autonomy of the system and to run without PC). “We have easily learned how to use the accessible software,” specifies M. Marchand. A production cycle lasts 45 seconds and 450 pieces are produced each day. “The system is much faster than what we had before, but this wasn't the crucial point for us. On the other hand, marking precision and flexibility were the other key factors,” concluded M. Marchand.
For all bespoke implementations, Sic Marking has created an engineering department to help their customers all around the world with their marking systems. Galvanometric system and optical headLearn More
Did you enjoy this great article?
Check out our free e-newsletters to read more great articles..Subscribe