Endress+Hauser Announces May-June 2015 Training Courses

Summary

April 15, 2015— Endress+Hauser announces its May and June 2015 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions. Courses include: May Training Events F-103 Coriolis Flow School May 1, 2015 Chalfont, PA www.cvent.com/d/vrq912/4W The Endress+Hauser Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment.  It also provides in-depth training on density and concentration measurements. C-203 Fieldcare Plant Asset Management Training May 4, 2015 La Porte, TX www.cvent.com/d/drql43/4W After completing this course, participants will understand what Plant Asset Management means, what can be the scope and how it can be used to improve a process. They will understand the differences, advantages and disadvantages of analog and digital data transmission in terms of configuration and maintenance. L-104 Free Space and Guided Radar May 5, 2015 La Porte, TX www.cvent.com/d/9rql4d/4W This is an introductory course (8 hours) for Free Space and Guided Wave Radar Level for maintenance and engineering personnel. We will dedicate a half day to each technology to give you a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on a PTU (Process Training Unit). I-101 Basic Instrumentation School May 5-6, 2015 Greenwood, IN www.cvent.com/d/mrq91d/4W The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. L-102 Advanced Level School May 5-7, 2015 Matthews, NC www.cvent.com/d/vrql83/4W The Advanced Level School begins with a brief review of current level technologies. Following the technology refresher, we will proceed to look deeper at each level measuring technology discussing then implementing proper techniques of configuration and calibration and troubleshooting. There will be an emphasis on an in depth understanding of Time of Flight, ToF technologies and envelope curves. This class will primarily be focused on hands-on training at our PTU (Process Training Unit). L-103 Time-of-Flight School   May 7, 2015 Greenwood, IN www.cvent.com/d/srq91c/4W The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters. I-102 Instrumentation Technology School May 11-15, 2015 Gonzales, LA www.cvent.com/d/2rql8d/4W The Endress+Hauser extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School. I-101 Basic Instrumentation School   May 12, 2015 Matthews, NC www.cvent.com/d/trql8d/4W The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. P-101 Pressure + Temperature School May 18-21, 2015 Memphis, TN www.cvent.com/d/3rql8r/4W The Endress+Hauser Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies. P-101 Pressure + Temperature School May 20-21, 2015 Romeoville, IL www.cvent.com/d/prq16p/4W The Endress+Hauser Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies. PTU Test Drive – Free Event May 29, 2015 Greenwood, IN www.us.endress.com/ptu-test-drive Free event demonstrates what Endress+Hauser has to offer in the area of process automation training with valuable presentations by industry professionals, tours of PTU facilities, and a chance to ask questions to our process experts. June Training Events I-101 Basic Instrumentation School   June 1-2, 2015 Matthews, NC www.cvent.com/d/grql4d/4W   The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. I-102 Instrumentation Technology School June 1-5, 2015 Gonzales, LA www.cvent.com/d/jrql8r/4W The Endress+Hauser extended course in process instrumentation will provide maintenance and engineering personnel with a deeper understanding of the principles explored in our Basic Instrumentation School. L-103 Time-of-Flight School   June 2, 2015 Matthews, NC www.cvent.com/d/srql8f/4W The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters. L-103 Time-of-Flight School   June 3, 2015 Greenwood, IN www.cvent.com/d/9rql44/4W The Endress+Hauser time-of-flight course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters. F-101 Flow School 1 (Introductory)   June 4-5, 2015 Greenwood, IN www.cvent.com/d/crql44/4W The Endress+Hauser introductory course to flow will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flow meters.   A-101 pH & Conductivity Measurement School    June 9, 2015 Matthews, NC www.cvent.com/d/zrqlkj/4W   The Endress+Hauser pH & Conductivity measurement school will provide maintenance and engineering personnel with a basic understanding of pH and Conductivity analytical technologies. F-103 Coriolis Flow School June 9, 2015 La Porte, TX www.cvent.com/d/6rqjnt/4W The Endress+Hauser Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment.  It also provides in-depth training on density and concentration measurements. I-101 Basic Instrumentation School   June 9-10, 2015 Romeoville, IL www.cvent.com/d/rrq160/4W The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. C-200 Basic Profibus PA   June 9-11, 2015 Greenwood, IN www.cvent.com/d/4rqlyf/4W This Basic Profibus training course is an intensive hands-on and theoretical 3-day training program. Upon completion of the 24 PDH course you will receive a completion certificate from Endress+Hauser. C-201 Certified Profibus PA June 9-12, 2015 Greenwood, IN www.cvent.com/d/srqlyv/4W This program is officially recognized by PROFIBUS International and represents a worldwide training standard. During the first three days trainees gain a thorough base of knowledge regarding PROFIBUS PA and parts of DP technology. On the fourth day, the program finishes with an exam. The lessons build upon each other in a way that the depth of the course steadily intensifies while core topics are brought home through repetition and the participant's personal hands-on experience. L-104 Free Space and Guided Radar June 16, 2015 Memphis, TN www.cvent.com/d/nrqlk5/4W   This is an introductory course (8 hours) for Free Space and Guided Wave Radar Level for maintenance and engineering personnel. We will dedicate a half day to each technology to give you a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on a PTU (Process Training Unit). A-101 pH & Conductivity Measurement School    June 19, 2015 Memphis, TN www.cvent.com/d/5rqlkj/4W   The Endress+Hauser pH & Conductivity measurement school will provide maintenance and engineering personnel with a basic understanding of pH and Conductivity analytical technologies. PTU Test Drive – Free Event June 19, 2015 Romeoville, IL www.us.endress.com/ptu-test-drive Free event demonstrates what Endress+Hauser has to offer in the area of process automation training with valuable presentations by industry professionals, tours of PTU facilities, and a chance to ask questions to our process experts. I-101 Basic Instrumentation School June 23-25, 2015 Matthews, NC www.cvent.com/d/krqlkm/4W The Endress+Hauser introductory course to instrumentation will provide maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations. About Endress+Hauser Endress+Hauser is one of the largest instrument manufacturers in the United States’ industrial automation industry – specializing in automation solutions for the Chemical, Food & Beverage, Oil & Gas, Water and Wastewater, Life Sciences, Power and Energy, Primaries, and Pulp and Paper Industries.  Endress+Hauser, a Switzerland based company, first began operations in the U.S. in 1970.  Since that time, Endress+Hauser has continued to invest in its U.S. operations - investing an average of 10% of its annual revenue into its infrastructure.