All-New: Securely tunnel historian data from plant to cloud. Generate alarms and notifications for any data changes.
CPX series displays from Beckhoff are Zone 2/22 classified for harsh process environments. The range of panels includes a wide selection of screen sizes, installation options and features.
Keller’s Econoline is a cost-effective multipurpose pressure transmitter for efficient process controls.
These sensors are suited to a range of applications including Augmented and Virtual Reality (AR/VR), Simultaneous Localization and Mapping (SLAM), and 3D scanning.
- H2W Technologies
This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60" [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.
- AW-Lake Company
Mounted on meters including AW-Lake Gear Meters and Turbine Flow Meters, the EDGE Flow Sensor outputs a frequency, current or analog signal that gives users more installation flexibility, especially when unsure of readout equipment or a control room interface.
- PEAK-System Technik
The routing from CAN to CAN FD or vice versa allows the integration of new CAN FD applications into existing CAN 2.0 buses.
- Yaskawa Motoman Robotics
The 20 kg payload HC20XP collaborative robot is suited for applications where robots need to safely work with, or in close proximity to humans.
- Grob Systems, Inc.
GROB-NET4Industry features various modular components that can be combined in a customizable manner, ensuring the solution for each application case.
L-com now stocks four new families of latching USB 3.0 cable assemblies that are designed to mate with any standard USB 3.0 Type-A jack. Low-smoke zero-halogen (LSZH) and Jacket PVC jacket options are available as well as latching Type-A and standard Type-B connecter combinations.
Automation Direct announced ProSense motor control relays to perform specific protective functions for motors or motor components.
- Delta Electronics
Based on a convection-cooled design, the Lyte series operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. It allows cold start at -30°C even in extreme condition. The overcurrent protection is designed to operate in constant current mode, which makes the product suitable for inductive and capacitive load applications.