Cookie Consent
This site uses cookies to store information on your computer. Without consent certain enhanced features will not be available and future visits may require repeated consent, so it is recommended to accept the use of cookies. Visit the Automation.com Privacy Policy for more information.FCI - Fluid Components International Products
FCI releases ST75V Hydrogen Flow Meter
- FCI - Fluid Components International
ST75V Hydrogen Flow Meter provides gas flow measurement in hazardous small line gas process applications where agency safety approvals are required.
FCI introduces ST50 remote mount thermal mass flow meter
- FCI - Fluid Components International
ST50 works where an air/gas flow meter transmitter has to be mounted to avoid hazardous areas or put in difficult-to-reach, equipment-crowded locations.
FCI FLT93 Flow and Liquid Level Switch Receives SIL-2 Rating
- FCI - Fluid Components International
The FLT93 Switch Series has been classified as Type A subsystem in accordance to IEC 61508-1 with a hardware failure tolerance of 0.
FCI introduces VeriCal Calibration System for GF90 Flow Meter
- FCI - Fluid Components International
VeriCal lets plant technicians confirm flow measurement accuracy without removing the meter from the pipe or process, saving time and money.
FCI introduces ST50 thermal mass flow meter
- FCI - Fluid Components International
ST50 has 1 percent accuracy, fits line sizes from 2 to 24 in., and is suitable for air, compressed air, HVAC and process gases, including nitrogen.
FCI releases ST75V gas flow meter
- FCI - Fluid Components International
ST75V thermal mass flow meter measures hydrogen, natural gas, and other gases in small line processes and skid-mounted equipment.
FCI releases NuTec FS2000L sanitary flow switch
- FCI - Fluid Components International
NuTec FS2000L inline flow switch has non-intrusive design that eliminates contact between the process media and the flow sensor.
FCI introduces MT91 Mass Flow Meter for stack gas
- FCI - Fluid Components International
MT91 is available with a tough chromium-carbide coating that protects it from dirty, abrasive and hot particulates.
FCI introduces GF90 Flare Gas Flow Meter
- FCI - Fluid Components International
GF90 measures combustible hydrocarbon waste flare gases of varying compositions. It has a thermal mass gas flow sensing element with 316 stainless steel and nickel-braze construction. It also can be specified with corrosion and abrasion-resistant alloys, including Hastelloy, Monel and tantalum.
FCI’s GF90 and GF92 Mass Flow Meters Receive ATEX Approval
- FCI - Fluid Components International
The GF90 Insertion and GF92 Inline Mass Flow Meters have received ATEX approval for use in potentially explosive environments classified as EExd IIC T4.